xref: /linux/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2/*
3 * Copyright (C) 2022 Kontron Electronics GmbH
4 */
5
6/dts-v1/;
7
8#include "imx8mm-kontron-osm-s.dtsi"
9
10/ {
11	model = "Kontron BL i.MX8MM OSM-S (N802X S)";
12	compatible = "kontron,imx8mm-bl-osm-s", "kontron,imx8mm-osm-s", "fsl,imx8mm";
13
14	aliases {
15		ethernet1 = &usbnet;
16	};
17
18	/* fixed crystal dedicated to mcp2542fd */
19	osc_can: clock-osc-can {
20		compatible = "fixed-clock";
21		#clock-cells = <0>;
22		clock-frequency = <40000000>;
23		clock-output-names = "osc-can";
24	};
25
26	leds {
27		compatible = "gpio-leds";
28
29		led1 {
30			label = "led1";
31			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
32			linux,default-trigger = "heartbeat";
33		};
34
35		led2 {
36			label = "led2";
37			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
38		};
39
40		led3 {
41			label = "led3";
42			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
43		};
44	};
45
46	pwm-beeper {
47		compatible = "pwm-beeper";
48		pwms = <&pwm2 0 5000 0>;
49	};
50
51	reg_rst_eth2: regulator-rst-eth2 {
52		compatible = "regulator-fixed";
53		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
54		enable-active-high;
55		regulator-always-on;
56		regulator-name = "rst-usb-eth2";
57	};
58
59	reg_vdd_5v: regulator-5v {
60		compatible = "regulator-fixed";
61		regulator-always-on;
62		regulator-min-microvolt = <5000000>;
63		regulator-max-microvolt = <5000000>;
64		regulator-name = "vdd-5v";
65	};
66};
67
68&ecspi2 {
69	status = "okay";
70
71	can@0 {
72		compatible = "microchip,mcp251xfd";
73		reg = <0>;
74		pinctrl-names = "default";
75		pinctrl-0 = <&pinctrl_can>;
76		clocks = <&osc_can>;
77		interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;
78		/*
79		 * Limit the SPI clock to 15 MHz to prevent issues
80		 * with corrupted data due to chip errata.
81		 */
82		spi-max-frequency = <15000000>;
83		vdd-supply = <&reg_vdd_3v3>;
84		xceiver-supply = <&reg_vdd_5v>;
85	};
86};
87
88&ecspi3 {
89	status = "okay";
90
91	eeram@0 {
92		compatible = "microchip,48l640";
93		reg = <0>;
94		spi-max-frequency = <20000000>;
95	};
96};
97
98&fec1 {
99	pinctrl-names = "default";
100	pinctrl-0 = <&pinctrl_enet_rgmii>;
101	phy-connection-type = "rgmii-id";
102	phy-handle = <&ethphy>;
103	status = "okay";
104
105	mdio {
106		#address-cells = <1>;
107		#size-cells = <0>;
108
109		ethphy: ethernet-phy@0 {
110			compatible = "ethernet-phy-id4f51.e91b";
111			reg = <0>;
112			reset-assert-us = <10000>;
113			reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
114		};
115	};
116};
117
118/*
119 * Rename SoM signals according to board usage:
120 *   GPIO_B_0      -> DIO1_OUT
121 *   GPIO_B_1      -> DIO2_OUT
122 */
123&gpio1 {
124	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
125			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
126			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "DIO1_OUT",
127			  "DIO2_OUT", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
128			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
129			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
130			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
131			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
132			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
133			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
134			  "ETH_A_(R)(G)MII_RXD3";
135};
136
137/*
138 * Rename SoM signals according to board usage:
139 *   GPIO_B_2      -> DIO3_OUT
140 *   GPIO_B_3      -> DIO4_OUT
141 */
142&gpio3 {
143	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
144			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
145			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
146			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
147			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "DIO3_OUT",
148			  "USB_B_EN", "DIO4_OUT", "PCIe_CLKREQ#", "PCIe_A_PERST#",
149			  "PCIe_WAKE#", "USB_A_EN";
150};
151
152/*
153 * Rename SoM signals according to board usage:
154 *   GPIO_B_4      -> DIO1_IN
155 *   GPIO_B_5      -> DIO2_IN
156 *   GPIO_B_6      -> DIO3_IN
157 *   GPIO_B_7      -> DIO4_IN
158 */
159&gpio4 {
160	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
161			  "DIO1_IN", "BOOT_SEL0#", "BOOT_SEL1#", "",
162			  "", "", "I2S_LRCLK", "I2S_BITCLK",
163			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "DIO2_IN", "DIO3_IN",
164			  "DIO4_IN", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
165			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
166			  "UART_A_RTS", "", "", "",
167			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
168};
169
170&i2c3 {
171	status = "okay";
172
173	usb-hub@2c {
174		compatible = "microchip,usb2514b";
175		pinctrl-names = "default";
176		pinctrl-0 = <&pinctrl_usb_hub>;
177		reg = <0x2c>;
178		non-removable-ports = <0>, <3>;
179		reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
180	};
181};
182
183&pwm2 {
184	status = "okay";
185};
186
187&reg_usb2_vbus {
188	status = "disabled";
189};
190
191&reg_usdhc2_vcc {
192	status = "disabled";
193};
194
195&reg_usdhc3_vcc {
196	status = "disabled";
197};
198
199&uart1 {
200	uart-has-rtscts;
201	status = "okay";
202};
203
204&uart2 {
205	linux,rs485-enabled-at-boot-time;
206	uart-has-rtscts;
207	status = "okay";
208};
209
210&usbotg1 {
211	dr_mode = "otg";
212	status = "okay";
213};
214
215&usbotg2 {
216	dr_mode = "host";
217	disable-over-current;
218	#address-cells = <1>;
219	#size-cells = <0>;
220	status = "okay";
221
222	/* VBUS is controlled by the hub */
223	/delete-property/ vbus-supply;
224
225	usb1@1 {
226		compatible = "usb424,2514";
227		reg = <1>;
228		#address-cells = <1>;
229		#size-cells = <0>;
230
231		usbnet: ethernet@1 {
232			compatible = "usbb95,772b";
233			reg = <1>;
234			local-mac-address = [ 00 00 00 00 00 00 ];
235		};
236	};
237};
238
239&usdhc2 {
240	vmmc-supply = <&reg_vdd_3v3>;
241	status = "okay";
242};
243
244&iomuxc {
245	pinctrl_can: cangrp {
246		fsl,pins = <
247			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19  /* SDIO_B_PWR_EN */
248		>;
249	};
250
251	pinctrl_usb_hub: usbhubgrp {
252		fsl,pins = <
253			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
254		>;
255	};
256};
257