xref: /linux/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi (revision 34dc1baba215b826e454b8d19e4f24adbeb7d00d)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2023 Emtop Embedded Solutions
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/leds/common.h>
10#include <dt-bindings/usb/pd.h>
11
12#include "imx8mm.dtsi"
13
14/ {
15	model = "Emtop Embedded Solutions i.MX8M Mini SOM-IMX8MMLPD4 SoM";
16	compatible = "ees,imx8mm-emtop-som", "fsl,imx8mm";
17
18	chosen {
19		stdout-path = &uart2;
20	};
21
22	leds {
23		compatible = "gpio-leds";
24		pinctrl-names = "default";
25		pinctrl-0 = <&pinctrl_gpio_led>;
26
27		led-0 {
28			function = LED_FUNCTION_POWER;
29			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
30			linux,default-trigger = "heartbeat";
31		};
32	};
33};
34
35&A53_0 {
36	cpu-supply = <&buck2>;
37};
38
39&A53_1 {
40	cpu-supply = <&buck2>;
41};
42
43&A53_2 {
44	cpu-supply = <&buck2>;
45};
46
47&A53_3 {
48	cpu-supply = <&buck2>;
49};
50
51&i2c1 {
52	clock-frequency = <400000>;
53	pinctrl-names = "default";
54	pinctrl-0 = <&pinctrl_i2c1>;
55	status = "okay";
56
57	pmic@25 {
58		compatible = "nxp,pca9450c";
59		reg = <0x25>;
60		pinctrl-names = "default";
61		pinctrl-0 = <&pinctrl_pmic>;
62		interrupt-parent = <&gpio1>;
63		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
64
65		regulators {
66			buck1: BUCK1 {
67				regulator-name = "BUCK1";
68				regulator-min-microvolt = <800000>;
69				regulator-max-microvolt = <1000000>;
70				regulator-boot-on;
71				regulator-always-on;
72				regulator-ramp-delay = <3125>;
73			};
74
75			buck2: BUCK2 {
76				regulator-name = "BUCK2";
77				regulator-min-microvolt = <800000>;
78				regulator-max-microvolt = <900000>;
79				regulator-boot-on;
80				regulator-always-on;
81				regulator-ramp-delay = <3125>;
82			};
83
84			buck3: BUCK3 {
85				regulator-name = "BUCK3";
86				regulator-min-microvolt = <800000>;
87				regulator-max-microvolt = <1000000>;
88				regulator-boot-on;
89				regulator-always-on;
90			};
91
92			buck4: BUCK4 {
93				regulator-name = "BUCK4";
94				regulator-min-microvolt = <3000000>;
95				regulator-max-microvolt = <3600000>;
96				regulator-boot-on;
97				regulator-always-on;
98			};
99
100			buck5: BUCK5 {
101				regulator-name = "BUCK5";
102				regulator-min-microvolt = <1650000>;
103				regulator-max-microvolt = <1950000>;
104				regulator-boot-on;
105				regulator-always-on;
106			};
107
108			buck6: BUCK6 {
109				regulator-name = "BUCK6";
110				regulator-min-microvolt = <1100000>;
111				regulator-max-microvolt = <1200000>;
112				regulator-boot-on;
113				regulator-always-on;
114			};
115
116			ldo1: LDO1 {
117				regulator-name = "LDO1";
118				regulator-min-microvolt = <1650000>;
119				regulator-max-microvolt = <1950000>;
120				regulator-boot-on;
121				regulator-always-on;
122			};
123
124			ldo2: LDO2 {
125				regulator-name = "LDO2";
126				regulator-min-microvolt = <800000>;
127				regulator-max-microvolt = <945000>;
128				regulator-boot-on;
129				regulator-always-on;
130			};
131
132			ldo3: LDO3 {
133				regulator-name = "LDO3";
134				regulator-min-microvolt = <1710000>;
135				regulator-max-microvolt = <1890000>;
136				regulator-boot-on;
137				regulator-always-on;
138			};
139
140			ldo4: LDO4 {
141				regulator-name = "LDO4";
142				regulator-min-microvolt = <810000>;
143				regulator-max-microvolt = <945000>;
144				regulator-boot-on;
145				regulator-always-on;
146			};
147
148			ldo5: LDO5 {
149				regulator-name = "LDO5";
150				regulator-min-microvolt = <1650000>;
151				regulator-max-microvolt = <3600000>;
152			};
153		};
154	};
155};
156
157&uart2 {
158	pinctrl-names = "default";
159	pinctrl-0 = <&pinctrl_uart2>;
160	status = "okay";
161};
162
163&usdhc3 {
164	pinctrl-names = "default", "state_100mhz", "state_200mhz";
165	pinctrl-0 = <&pinctrl_usdhc3>;
166	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
167	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
168	bus-width = <8>;
169	non-removable;
170	status = "okay";
171};
172
173&wdog1 {
174	pinctrl-names = "default";
175	pinctrl-0 = <&pinctrl_wdog>;
176	fsl,ext-reset-output;
177	status = "okay";
178};
179
180&iomuxc {
181	pinctrl_gpio_led: emtop-gpio-led-grp {
182		fsl,pins = <
183			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16			0x19
184			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29			0x19
185		>;
186	};
187
188	pinctrl_i2c1: emtop-i2c1-grp {
189		fsl,pins = <
190			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL				0x400001c3
191			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA				0x400001c3
192		>;
193	};
194
195	pinctrl_pmic: emtop-pmic-grp {
196		fsl,pins = <
197			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3			0x41
198		>;
199	};
200
201	pinctrl_uart2: emtop-uart2-grp {
202		fsl,pins = <
203			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX			0x140
204			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX			0x140
205		>;
206	};
207
208	pinctrl_usdhc3: emtop-usdhc3-grp {
209		fsl,pins = <
210			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x190
211			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d0
212			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d0
213			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d0
214			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d0
215			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d0
216			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d0
217			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d0
218			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d0
219			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d0
220			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x190
221		>;
222	};
223
224	pinctrl_usdhc3_100mhz: emtop-usdhc3-100mhz-grp {
225		fsl,pins = <
226			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x194
227			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d4
228			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d4
229			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d4
230			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d4
231			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d4
232			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d4
233			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d4
234			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d4
235			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d4
236			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x194
237		>;
238	};
239
240	pinctrl_usdhc3_200mhz: emtop-usdhc3-200mhz-grp {
241		fsl,pins = <
242			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x196
243			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d6
244			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d6
245			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d6
246			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d6
247			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d6
248			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d6
249			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d6
250			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d6
251			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d6
252			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x196
253		>;
254	};
255
256	pinctrl_wdog: emtop-wdog-grp {
257		fsl,pins = <
258			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B			0xc6
259		>;
260	};
261};
262