xref: /linux/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi (revision ae22a94997b8a03dcb3c922857c203246711f9d4)
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Copyright 2020 Compass Electronics Group, LLC
4 */
5
6#include <dt-bindings/phy/phy-imx8-pcie.h>
7
8/ {
9
10	dmic_codec: dmic-codec {
11		compatible = "dmic-codec";
12		num-channels = <1>;
13		#sound-dai-cells = <0>;
14	};
15
16	leds {
17		compatible = "gpio-leds";
18
19		led0 {
20			label = "gen_led0";
21			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
22			default-state = "off";
23		};
24
25		led1 {
26			label = "gen_led1";
27			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
28			default-state = "off";
29		};
30
31		led2 {
32			label = "gen_led2";
33			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
34			default-state = "off";
35		};
36
37		led3 {
38			pinctrl-names = "default";
39			pinctrl-0 = <&pinctrl_led3>;
40			label = "heartbeat";
41			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
42			linux,default-trigger = "heartbeat";
43		};
44	};
45
46	pcie0_refclk: pcie0-refclk {
47		compatible = "fixed-clock";
48		#clock-cells = <0>;
49		clock-frequency = <100000000>;
50	};
51
52	pcie0_refclk_gated:  pcie0-refclk-gated {
53		compatible = "gpio-gate-clock";
54		clocks = <&pcie0_refclk>;
55		#clock-cells = <0>;
56		enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
57	};
58
59	reg_audio: regulator-audio {
60		compatible = "regulator-fixed";
61		regulator-name = "3v3_aud";
62		regulator-min-microvolt = <3300000>;
63		regulator-max-microvolt = <3300000>;
64		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
65		enable-active-high;
66	};
67
68	reg_usbotg1: regulator-usbotg1 {
69		compatible = "regulator-fixed";
70		pinctrl-names = "default";
71		pinctrl-0 = <&pinctrl_reg_usb_otg1>;
72		regulator-name = "usb_otg_vbus";
73		regulator-min-microvolt = <5000000>;
74		regulator-max-microvolt = <5000000>;
75		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
76		enable-active-high;
77	};
78
79	reg_camera: regulator-camera {
80		compatible = "regulator-fixed";
81		regulator-name = "mipi_pwr";
82		regulator-min-microvolt = <2800000>;
83		regulator-max-microvolt = <2800000>;
84		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
85		enable-active-high;
86		startup-delay-us = <100000>;
87	};
88
89	reg_pcie0: regulator-pcie {
90		compatible = "regulator-fixed";
91		regulator-name = "pci_pwr_en";
92		regulator-min-microvolt = <3300000>;
93		regulator-max-microvolt = <3300000>;
94		enable-active-high;
95		gpio = <&pca6416_1 1 GPIO_ACTIVE_HIGH>;
96		startup-delay-us = <100000>;
97	};
98
99	reg_usdhc2_vmmc: regulator-usdhc2 {
100		compatible = "regulator-fixed";
101		regulator-name = "VSD_3V3";
102		regulator-min-microvolt = <3300000>;
103		regulator-max-microvolt = <3300000>;
104		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
105		enable-active-high;
106	};
107
108	sound-dmic {
109		compatible = "simple-audio-card";
110		simple-audio-card,name = "dmic";
111		simple-audio-card,format = "pdm";
112		simple-audio-card,bitclock-master = <&dailink_master>;
113		simple-audio-card,frame-master = <&dailink_master>;
114
115		dailink_master: simple-audio-card,cpu {
116			sound-dai = <&micfil>;
117		};
118
119		simple-audio-card,codec {
120			sound-dai = <&dmic_codec>;
121		};
122	};
123
124	sound-wm8962 {
125		compatible = "simple-audio-card";
126		simple-audio-card,name = "wm8962";
127		simple-audio-card,format = "i2s";
128		simple-audio-card,widgets = "Headphone", "Headphones",
129					    "Microphone", "Headset Mic",
130					    "Speaker", "Speaker";
131		simple-audio-card,routing = "Headphones", "HPOUTL",
132					    "Headphones", "HPOUTR",
133					    "Speaker", "SPKOUTL",
134					    "Speaker", "SPKOUTR",
135					    "Headset Mic", "MICBIAS",
136					    "IN3R", "Headset Mic";
137
138		simple-audio-card,cpu {
139			sound-dai = <&sai3>;
140		};
141
142		simple-audio-card,codec {
143			sound-dai = <&wm8962>;
144			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
145			frame-master;
146			bitclock-master;
147		};
148	};
149};
150
151&csi {
152	status = "okay";
153};
154
155&ecspi2 {
156	pinctrl-names = "default";
157	pinctrl-0 = <&pinctrl_espi2>;
158	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
159	status = "okay";
160
161	eeprom@0 {
162		compatible = "microchip,at25160bn", "atmel,at25";
163		reg = <0>;
164		spi-max-frequency = <5000000>;
165		spi-cpha;
166		spi-cpol;
167		pagesize = <32>;
168		size = <2048>;
169		address-width = <16>;
170	};
171};
172
173&i2c2 {
174	clock-frequency = <400000>;
175	pinctrl-names = "default";
176	pinctrl-0 = <&pinctrl_i2c2>;
177	status = "okay";
178
179	camera@10 {
180		compatible = "ovti,ov5640";
181		pinctrl-names = "default";
182		pinctrl-0 = <&pinctrl_ov5640>;
183		reg = <0x10>;
184		clocks = <&clk IMX8MM_CLK_CLKO1>;
185		clock-names = "xclk";
186		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
187		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
188		assigned-clock-rates = <24000000>;
189		AVDD-supply = <&reg_camera>;  /* 2.8v */
190		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
191		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
192
193		port {
194			/* MIPI CSI-2 bus endpoint */
195			ov5640_to_mipi_csi2: endpoint {
196				remote-endpoint = <&imx8mm_mipi_csi_in>;
197				clock-lanes = <0>;
198				data-lanes = <1 2>;
199			};
200		};
201	};
202};
203
204&i2c4 {
205	clock-frequency = <400000>;
206	pinctrl-names = "default";
207	pinctrl-0 = <&pinctrl_i2c4>;
208	status = "okay";
209
210	wm8962: audio-codec@1a {
211		compatible = "wlf,wm8962";
212		reg = <0x1a>;
213		clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
214		DCVDD-supply = <&reg_audio>;
215		DBVDD-supply = <&reg_audio>;
216		AVDD-supply = <&reg_audio>;
217		CPVDD-supply = <&reg_audio>;
218		MICVDD-supply = <&reg_audio>;
219		PLLVDD-supply = <&reg_audio>;
220		SPKVDD1-supply = <&reg_audio>;
221		SPKVDD2-supply = <&reg_audio>;
222		gpio-cfg = <
223			0x0000 /* 0:Default */
224			0x0000 /* 1:Default */
225			0x0000 /* 2:FN_DMICCLK */
226			0x0000 /* 3:Default */
227			0x0000 /* 4:FN_DMICCDAT */
228			0x0000 /* 5:Default */
229		>;
230		#sound-dai-cells = <0>;
231	};
232
233	pca6416_0: gpio@20 {
234		compatible = "nxp,pcal6416";
235		reg = <0x20>;
236		pinctrl-names = "default";
237		pinctrl-0 = <&pinctrl_pcal6414>;
238		gpio-controller;
239		#gpio-cells = <2>;
240		interrupt-parent = <&gpio4>;
241		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
242	};
243
244	pca6416_1: gpio@21 {
245		compatible = "nxp,pcal6416";
246		reg = <0x21>;
247		gpio-controller;
248		#gpio-cells = <2>;
249		interrupt-parent = <&gpio4>;
250		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
251	};
252};
253
254&micfil {
255	pinctrl-names = "default";
256	pinctrl-0 = <&pinctrl_pdm>;
257	assigned-clocks = <&clk IMX8MM_CLK_PDM>;
258	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
259	assigned-clock-rates = <49152000>;
260	status = "okay";
261};
262
263&mipi_csi {
264	status = "okay";
265	ports {
266		port@0 {
267			imx8mm_mipi_csi_in: endpoint {
268				remote-endpoint = <&ov5640_to_mipi_csi2>;
269				data-lanes = <1 2>;
270			};
271		};
272	};
273};
274
275&pcie_phy {
276	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
277	fsl,tx-deemph-gen1 = <0x2d>;
278	fsl,tx-deemph-gen2 = <0xf>;
279	fsl,clkreq-unsupported;
280	clocks = <&pcie0_refclk_gated>;
281	clock-names = "ref";
282	status = "okay";
283};
284
285&pcie0 {
286	pinctrl-names = "default";
287	pinctrl-0 = <&pinctrl_pcie0>;
288	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
289	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk_gated>,
290		 <&clk IMX8MM_CLK_PCIE1_AUX>;
291	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
292			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
293	assigned-clock-rates = <10000000>, <250000000>;
294	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
295				 <&clk IMX8MM_SYS_PLL2_250M>;
296	vpcie-supply = <&reg_pcie0>;
297	status = "okay";
298};
299
300&sai3 {
301	pinctrl-names = "default";
302	pinctrl-0 = <&pinctrl_sai3>;
303	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
304	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
305	assigned-clock-rates = <24576000>;
306	fsl,sai-mclk-direction-output;
307	status = "okay";
308};
309
310&snvs_pwrkey {
311	status = "okay";
312};
313
314&uart2 { /* console */
315	pinctrl-names = "default";
316	pinctrl-0 = <&pinctrl_uart2>;
317	status = "okay";
318};
319
320&uart3 {
321	pinctrl-names = "default";
322	pinctrl-0 = <&pinctrl_uart3>;
323	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
324	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
325	uart-has-rtscts;
326	status = "okay";
327};
328
329&usbotg1 {
330	vbus-supply = <&reg_usbotg1>;
331	disable-over-current;
332	dr_mode = "otg";
333	status = "okay";
334};
335
336&usbotg2 {
337	disable-over-current;
338	dr_mode = "host";
339	status = "okay";
340};
341
342&usbphynop2 {
343	reset-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
344};
345
346&usdhc2 {
347	pinctrl-names = "default", "state_100mhz", "state_200mhz";
348	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
349	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
350	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
351	bus-width = <4>;
352	vmmc-supply = <&reg_usdhc2_vmmc>;
353	status = "okay";
354};
355
356&iomuxc {
357	pinctrl_espi2: espi2grp {
358		fsl,pins = <
359			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
360			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
361			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
362			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13              0x41
363		>;
364	};
365
366	pinctrl_i2c2: i2c2grp {
367		fsl,pins = <
368			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
369			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
370		>;
371	};
372
373	pinctrl_i2c4: i2c4grp {
374		fsl,pins = <
375			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
376			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
377		>;
378	};
379
380	pinctrl_led3: led3grp {
381		fsl,pins = <
382			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
383		>;
384	};
385
386	pinctrl_ov5640: ov5640grp {
387		fsl,pins = <
388			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
389			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
390			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
391		>;
392	};
393
394	pinctrl_pcal6414: pcal6414-gpiogrp {
395		fsl,pins = <
396			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
397		>;
398	};
399
400	pinctrl_pdm: pdmgrp {
401		fsl,pins = <
402			MX8MM_IOMUXC_SAI5_RXC_PDM_CLK	0xd6
403			MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0	0xd6
404		>;
405	};
406
407	pinctrl_reg_usb_otg1: usbotg1grp {
408		fsl,pins = <
409			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
410		>;
411	};
412
413	pinctrl_pcie0: pcie0grp {
414		fsl,pins = <
415			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
416		>;
417	};
418
419	pinctrl_sai3: sai3grp {
420		fsl,pins = <
421			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
422			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
423			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
424			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
425			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
426		>;
427	};
428
429	pinctrl_uart2: uart2grp {
430		fsl,pins = <
431			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
432			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
433		>;
434	};
435
436	pinctrl_uart3: uart3grp {
437		fsl,pins = <
438			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
439			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
440			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x40
441			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x40
442		>;
443	};
444
445	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
446		fsl,pins = <
447			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
448			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
449		>;
450	};
451
452	pinctrl_usdhc2: usdhc2grp {
453		fsl,pins = <
454			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
455			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
456			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
457			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
458			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
459			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
460			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
461		>;
462	};
463
464	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
465		fsl,pins = <
466			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
467			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
468			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
469			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
470			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
471			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
472			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
473		>;
474	};
475
476	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
477		fsl,pins = <
478			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
479			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
480			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
481			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
482			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
483			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
484			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
485		>;
486	};
487};
488