xref: /linux/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi (revision e6a901a00822659181c93c86d8bbc2a17779fddc)
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2018-2019 NXP
4 *	Dong Aisheng <aisheng.dong@nxp.com>
5 */
6
7#include <dt-bindings/clock/imx8-lpcg.h>
8#include <dt-bindings/dma/fsl-edma.h>
9#include <dt-bindings/firmware/imx/rsrc.h>
10
11dma_ipg_clk: clock-dma-ipg {
12	compatible = "fixed-clock";
13	#clock-cells = <0>;
14	clock-frequency = <120000000>;
15	clock-output-names = "dma_ipg_clk";
16};
17
18dma_subsys: bus@5a000000 {
19	compatible = "simple-bus";
20	#address-cells = <1>;
21	#size-cells = <1>;
22	ranges = <0x5a000000 0x0 0x5a000000 0x1000000>;
23
24	lpspi0: spi@5a000000 {
25		compatible = "fsl,imx7ulp-spi";
26		reg = <0x5a000000 0x10000>;
27		#address-cells = <1>;
28		#size-cells = <0>;
29		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
30		interrupt-parent = <&gic>;
31		clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
32			 <&spi0_lpcg IMX_LPCG_CLK_4>;
33		clock-names = "per", "ipg";
34		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
35		assigned-clock-rates = <60000000>;
36		power-domains = <&pd IMX_SC_R_SPI_0>;
37		status = "disabled";
38	};
39
40	lpspi1: spi@5a010000 {
41		compatible = "fsl,imx7ulp-spi";
42		reg = <0x5a010000 0x10000>;
43		#address-cells = <1>;
44		#size-cells = <0>;
45		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
46		interrupt-parent = <&gic>;
47		clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
48			 <&spi1_lpcg IMX_LPCG_CLK_4>;
49		clock-names = "per", "ipg";
50		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
51		assigned-clock-rates = <60000000>;
52		power-domains = <&pd IMX_SC_R_SPI_1>;
53		status = "disabled";
54	};
55
56	lpspi2: spi@5a020000 {
57		compatible = "fsl,imx7ulp-spi";
58		reg = <0x5a020000 0x10000>;
59		#address-cells = <1>;
60		#size-cells = <0>;
61		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
62		interrupt-parent = <&gic>;
63		clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
64			 <&spi2_lpcg IMX_LPCG_CLK_4>;
65		clock-names = "per", "ipg";
66		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
67		assigned-clock-rates = <60000000>;
68		power-domains = <&pd IMX_SC_R_SPI_2>;
69		status = "disabled";
70	};
71
72	lpspi3: spi@5a030000 {
73		compatible = "fsl,imx7ulp-spi";
74		reg = <0x5a030000 0x10000>;
75		#address-cells = <1>;
76		#size-cells = <0>;
77		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
78		interrupt-parent = <&gic>;
79		clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
80			 <&spi3_lpcg IMX_LPCG_CLK_4>;
81		clock-names = "per", "ipg";
82		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
83		assigned-clock-rates = <60000000>;
84		power-domains = <&pd IMX_SC_R_SPI_3>;
85		status = "disabled";
86	};
87
88	lpuart0: serial@5a060000 {
89		reg = <0x5a060000 0x1000>;
90		interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
91		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
92			 <&uart0_lpcg IMX_LPCG_CLK_0>;
93		clock-names = "ipg", "baud";
94		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
95		assigned-clock-rates = <80000000>;
96		power-domains = <&pd IMX_SC_R_UART_0>;
97		dma-names = "rx", "tx";
98		dmas = <&edma2 8 0 FSL_EDMA_RX>, <&edma2 9 0 0>;
99		status = "disabled";
100	};
101
102	lpuart1: serial@5a070000 {
103		reg = <0x5a070000 0x1000>;
104		interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
105		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
106			 <&uart1_lpcg IMX_LPCG_CLK_0>;
107		clock-names = "ipg", "baud";
108		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
109		assigned-clock-rates = <80000000>;
110		power-domains = <&pd IMX_SC_R_UART_1>;
111		dma-names = "rx", "tx";
112		dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 11 0 0>;
113		status = "disabled";
114	};
115
116	lpuart2: serial@5a080000 {
117		reg = <0x5a080000 0x1000>;
118		interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
119		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
120			 <&uart2_lpcg IMX_LPCG_CLK_0>;
121		clock-names = "ipg", "baud";
122		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
123		assigned-clock-rates = <80000000>;
124		power-domains = <&pd IMX_SC_R_UART_2>;
125		dma-names = "rx", "tx";
126		dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>;
127		status = "disabled";
128	};
129
130	lpuart3: serial@5a090000 {
131		reg = <0x5a090000 0x1000>;
132		interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
133		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
134			 <&uart3_lpcg IMX_LPCG_CLK_0>;
135		clock-names = "ipg", "baud";
136		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
137		assigned-clock-rates = <80000000>;
138		power-domains = <&pd IMX_SC_R_UART_3>;
139		dma-names = "rx", "tx";
140		dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>;
141		status = "disabled";
142	};
143
144	adma_pwm: pwm@5a190000 {
145		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
146		reg = <0x5a190000 0x1000>;
147		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
148		clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
149			 <&adma_pwm_lpcg IMX_LPCG_CLK_0>;
150		clock-names = "ipg", "per";
151		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
152		assigned-clock-rates = <24000000>;
153		#pwm-cells = <3>;
154		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
155	};
156
157	edma2: dma-controller@5a1f0000 {
158		compatible = "fsl,imx8qm-edma";
159		reg = <0x5a1f0000 0x170000>;
160		#dma-cells = <3>;
161		dma-channels = <16>;
162		interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
163			     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
164			     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
165			     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
166			     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
167			     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
168			     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
169			     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
170			     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
171			     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
172			     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
173			     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
174			     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
175			     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
176			     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
177			     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
178		power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
179				<&pd IMX_SC_R_DMA_2_CH1>,
180				<&pd IMX_SC_R_DMA_2_CH2>,
181				<&pd IMX_SC_R_DMA_2_CH3>,
182				<&pd IMX_SC_R_DMA_2_CH4>,
183				<&pd IMX_SC_R_DMA_2_CH5>,
184				<&pd IMX_SC_R_DMA_2_CH6>,
185				<&pd IMX_SC_R_DMA_2_CH7>,
186				<&pd IMX_SC_R_DMA_2_CH8>,
187				<&pd IMX_SC_R_DMA_2_CH9>,
188				<&pd IMX_SC_R_DMA_2_CH10>,
189				<&pd IMX_SC_R_DMA_2_CH11>,
190				<&pd IMX_SC_R_DMA_2_CH12>,
191				<&pd IMX_SC_R_DMA_2_CH13>,
192				<&pd IMX_SC_R_DMA_2_CH14>,
193				<&pd IMX_SC_R_DMA_2_CH15>;
194	};
195
196	spi0_lpcg: clock-controller@5a400000 {
197		compatible = "fsl,imx8qxp-lpcg";
198		reg = <0x5a400000 0x10000>;
199		#clock-cells = <1>;
200		clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,
201			 <&dma_ipg_clk>;
202		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
203		clock-output-names = "spi0_lpcg_clk",
204				     "spi0_lpcg_ipg_clk";
205		power-domains = <&pd IMX_SC_R_SPI_0>;
206	};
207
208	spi1_lpcg: clock-controller@5a410000 {
209		compatible = "fsl,imx8qxp-lpcg";
210		reg = <0x5a410000 0x10000>;
211		#clock-cells = <1>;
212		clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>,
213			 <&dma_ipg_clk>;
214		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
215		clock-output-names = "spi1_lpcg_clk",
216				     "spi1_lpcg_ipg_clk";
217		power-domains = <&pd IMX_SC_R_SPI_1>;
218	};
219
220	spi2_lpcg: clock-controller@5a420000 {
221		compatible = "fsl,imx8qxp-lpcg";
222		reg = <0x5a420000 0x10000>;
223		#clock-cells = <1>;
224		clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>,
225			 <&dma_ipg_clk>;
226		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
227		clock-output-names = "spi2_lpcg_clk",
228				     "spi2_lpcg_ipg_clk";
229		power-domains = <&pd IMX_SC_R_SPI_2>;
230	};
231
232	spi3_lpcg: clock-controller@5a430000 {
233		compatible = "fsl,imx8qxp-lpcg";
234		reg = <0x5a430000 0x10000>;
235		#clock-cells = <1>;
236		clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>,
237			 <&dma_ipg_clk>;
238		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
239		clock-output-names = "spi3_lpcg_clk",
240				     "spi3_lpcg_ipg_clk";
241		power-domains = <&pd IMX_SC_R_SPI_3>;
242	};
243
244	uart0_lpcg: clock-controller@5a460000 {
245		compatible = "fsl,imx8qxp-lpcg";
246		reg = <0x5a460000 0x10000>;
247		#clock-cells = <1>;
248		clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>,
249			 <&dma_ipg_clk>;
250		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
251		clock-output-names = "uart0_lpcg_baud_clk",
252				     "uart0_lpcg_ipg_clk";
253		power-domains = <&pd IMX_SC_R_UART_0>;
254	};
255
256	uart1_lpcg: clock-controller@5a470000 {
257		compatible = "fsl,imx8qxp-lpcg";
258		reg = <0x5a470000 0x10000>;
259		#clock-cells = <1>;
260		clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>,
261			 <&dma_ipg_clk>;
262		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
263		clock-output-names = "uart1_lpcg_baud_clk",
264				     "uart1_lpcg_ipg_clk";
265		power-domains = <&pd IMX_SC_R_UART_1>;
266	};
267
268	uart2_lpcg: clock-controller@5a480000 {
269		compatible = "fsl,imx8qxp-lpcg";
270		reg = <0x5a480000 0x10000>;
271		#clock-cells = <1>;
272		clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>,
273			 <&dma_ipg_clk>;
274		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
275		clock-output-names = "uart2_lpcg_baud_clk",
276				     "uart2_lpcg_ipg_clk";
277		power-domains = <&pd IMX_SC_R_UART_2>;
278	};
279
280	uart3_lpcg: clock-controller@5a490000 {
281		compatible = "fsl,imx8qxp-lpcg";
282		reg = <0x5a490000 0x10000>;
283		#clock-cells = <1>;
284		clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>,
285			 <&dma_ipg_clk>;
286		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
287		clock-output-names = "uart3_lpcg_baud_clk",
288				     "uart3_lpcg_ipg_clk";
289		power-domains = <&pd IMX_SC_R_UART_3>;
290	};
291
292	adma_pwm_lpcg: clock-controller@5a590000 {
293		compatible = "fsl,imx8qxp-lpcg";
294		reg = <0x5a590000 0x10000>;
295		#clock-cells = <1>;
296		clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,
297			 <&dma_ipg_clk>;
298		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
299		clock-output-names = "adma_pwm_lpcg_clk",
300				     "adma_pwm_lpcg_ipg_clk";
301		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
302	};
303
304	i2c0: i2c@5a800000 {
305		reg = <0x5a800000 0x4000>;
306		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
307		clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
308			 <&i2c0_lpcg IMX_LPCG_CLK_4>;
309		clock-names = "per", "ipg";
310		assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
311		assigned-clock-rates = <24000000>;
312		power-domains = <&pd IMX_SC_R_I2C_0>;
313		status = "disabled";
314	};
315
316	i2c1: i2c@5a810000 {
317		reg = <0x5a810000 0x4000>;
318		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
319		clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
320			 <&i2c1_lpcg IMX_LPCG_CLK_4>;
321		clock-names = "per", "ipg";
322		assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
323		assigned-clock-rates = <24000000>;
324		power-domains = <&pd IMX_SC_R_I2C_1>;
325		status = "disabled";
326	};
327
328	i2c2: i2c@5a820000 {
329		reg = <0x5a820000 0x4000>;
330		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
331		clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
332			 <&i2c2_lpcg IMX_LPCG_CLK_4>;
333		clock-names = "per", "ipg";
334		assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
335		assigned-clock-rates = <24000000>;
336		power-domains = <&pd IMX_SC_R_I2C_2>;
337		status = "disabled";
338	};
339
340	i2c3: i2c@5a830000 {
341		reg = <0x5a830000 0x4000>;
342		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
343		clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
344			 <&i2c3_lpcg IMX_LPCG_CLK_4>;
345		clock-names = "per", "ipg";
346		assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
347		assigned-clock-rates = <24000000>;
348		power-domains = <&pd IMX_SC_R_I2C_3>;
349		status = "disabled";
350	};
351
352	adc0: adc@5a880000 {
353		compatible = "nxp,imx8qxp-adc";
354		#io-channel-cells = <1>;
355		reg = <0x5a880000 0x10000>;
356		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
357		interrupt-parent = <&gic>;
358		clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
359			 <&adc0_lpcg IMX_LPCG_CLK_4>;
360		clock-names = "per", "ipg";
361		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
362		assigned-clock-rates = <24000000>;
363		power-domains = <&pd IMX_SC_R_ADC_0>;
364		status = "disabled";
365	 };
366
367	adc1: adc@5a890000 {
368		compatible = "nxp,imx8qxp-adc";
369		#io-channel-cells = <1>;
370		reg = <0x5a890000 0x10000>;
371		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
372		interrupt-parent = <&gic>;
373		clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
374			 <&adc1_lpcg IMX_LPCG_CLK_4>;
375		clock-names = "per", "ipg";
376		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
377		assigned-clock-rates = <24000000>;
378		power-domains = <&pd IMX_SC_R_ADC_1>;
379		status = "disabled";
380	};
381
382	flexcan1: can@5a8d0000 {
383		compatible = "fsl,imx8qm-flexcan";
384		reg = <0x5a8d0000 0x10000>;
385		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
386		interrupt-parent = <&gic>;
387		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
388			 <&can0_lpcg IMX_LPCG_CLK_0>;
389		clock-names = "ipg", "per";
390		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
391		assigned-clock-rates = <40000000>;
392		power-domains = <&pd IMX_SC_R_CAN_0>;
393		/* SLSlice[4] */
394		fsl,clk-source = /bits/ 8 <0>;
395		fsl,scu-index = /bits/ 8 <0>;
396		status = "disabled";
397	};
398
399	flexcan2: can@5a8e0000 {
400		compatible = "fsl,imx8qm-flexcan";
401		reg = <0x5a8e0000 0x10000>;
402		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
403		interrupt-parent = <&gic>;
404		/* CAN0 clock and PD is shared among all CAN instances as
405		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
406		 * has to be powered on.
407		 */
408		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
409			 <&can0_lpcg IMX_LPCG_CLK_0>;
410		clock-names = "ipg", "per";
411		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
412		assigned-clock-rates = <40000000>;
413		power-domains = <&pd IMX_SC_R_CAN_1>;
414		/* SLSlice[4] */
415		fsl,clk-source = /bits/ 8 <0>;
416		fsl,scu-index = /bits/ 8 <1>;
417		status = "disabled";
418	};
419
420	flexcan3: can@5a8f0000 {
421		compatible = "fsl,imx8qm-flexcan";
422		reg = <0x5a8f0000 0x10000>;
423		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
424		interrupt-parent = <&gic>;
425		/* CAN0 clock and PD is shared among all CAN instances as
426		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
427		 * has to be powered on.
428		 */
429		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
430			 <&can0_lpcg IMX_LPCG_CLK_0>;
431		clock-names = "ipg", "per";
432		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
433		assigned-clock-rates = <40000000>;
434		power-domains = <&pd IMX_SC_R_CAN_2>;
435		/* SLSlice[4] */
436		fsl,clk-source = /bits/ 8 <0>;
437		fsl,scu-index = /bits/ 8 <2>;
438		status = "disabled";
439	};
440
441	edma3: dma-controller@5a9f0000 {
442		compatible = "fsl,imx8qm-edma";
443		reg = <0x5a9f0000 0x90000>;
444		#dma-cells = <3>;
445		dma-channels = <8>;
446		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
447			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
448			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
449			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
450			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
451			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
452			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
453			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
454		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
455				<&pd IMX_SC_R_DMA_3_CH1>,
456				<&pd IMX_SC_R_DMA_3_CH2>,
457				<&pd IMX_SC_R_DMA_3_CH3>,
458				<&pd IMX_SC_R_DMA_3_CH4>,
459				<&pd IMX_SC_R_DMA_3_CH5>,
460				<&pd IMX_SC_R_DMA_3_CH6>,
461				<&pd IMX_SC_R_DMA_3_CH7>;
462	};
463
464	i2c0_lpcg: clock-controller@5ac00000 {
465		compatible = "fsl,imx8qxp-lpcg";
466		reg = <0x5ac00000 0x10000>;
467		#clock-cells = <1>;
468		clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>,
469			 <&dma_ipg_clk>;
470		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
471		clock-output-names = "i2c0_lpcg_clk",
472				     "i2c0_lpcg_ipg_clk";
473		power-domains = <&pd IMX_SC_R_I2C_0>;
474	};
475
476	i2c1_lpcg: clock-controller@5ac10000 {
477		compatible = "fsl,imx8qxp-lpcg";
478		reg = <0x5ac10000 0x10000>;
479		#clock-cells = <1>;
480		clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>,
481			 <&dma_ipg_clk>;
482		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
483		clock-output-names = "i2c1_lpcg_clk",
484				     "i2c1_lpcg_ipg_clk";
485		power-domains = <&pd IMX_SC_R_I2C_1>;
486	};
487
488	i2c2_lpcg: clock-controller@5ac20000 {
489		compatible = "fsl,imx8qxp-lpcg";
490		reg = <0x5ac20000 0x10000>;
491		#clock-cells = <1>;
492		clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>,
493			 <&dma_ipg_clk>;
494		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
495		clock-output-names = "i2c2_lpcg_clk",
496				     "i2c2_lpcg_ipg_clk";
497		power-domains = <&pd IMX_SC_R_I2C_2>;
498	};
499
500	i2c3_lpcg: clock-controller@5ac30000 {
501		compatible = "fsl,imx8qxp-lpcg";
502		reg = <0x5ac30000 0x10000>;
503		#clock-cells = <1>;
504		clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>,
505			 <&dma_ipg_clk>;
506		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
507		clock-output-names = "i2c3_lpcg_clk",
508				     "i2c3_lpcg_ipg_clk";
509		power-domains = <&pd IMX_SC_R_I2C_3>;
510	};
511
512	adc0_lpcg: clock-controller@5ac80000 {
513		compatible = "fsl,imx8qxp-lpcg";
514		reg = <0x5ac80000 0x10000>;
515		#clock-cells = <1>;
516		clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>,
517			 <&dma_ipg_clk>;
518		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
519		clock-output-names = "adc0_lpcg_clk",
520				     "adc0_lpcg_ipg_clk";
521		power-domains = <&pd IMX_SC_R_ADC_0>;
522	};
523
524	adc1_lpcg: clock-controller@5ac90000 {
525		compatible = "fsl,imx8qxp-lpcg";
526		reg = <0x5ac90000 0x10000>;
527		#clock-cells = <1>;
528		clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>,
529			 <&dma_ipg_clk>;
530		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
531		clock-output-names = "adc1_lpcg_clk",
532				     "adc1_lpcg_ipg_clk";
533		power-domains = <&pd IMX_SC_R_ADC_1>;
534	};
535
536	can0_lpcg: clock-controller@5acd0000 {
537		compatible = "fsl,imx8qxp-lpcg";
538		reg = <0x5acd0000 0x10000>;
539		#clock-cells = <1>;
540		clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>,
541			 <&dma_ipg_clk>, <&dma_ipg_clk>;
542		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
543		clock-output-names = "can0_lpcg_pe_clk",
544				     "can0_lpcg_ipg_clk",
545				     "can0_lpcg_chi_clk";
546		power-domains = <&pd IMX_SC_R_CAN_0>;
547	};
548};
549