xref: /linux/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi (revision 0d3b051adbb72ed81956447d0d1e54d5943ee6f5) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree file for Freescale LS2080A QDS Board.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2017 NXP
7 *
8 * Abhimanyu Saini <abhimanyu.saini@nxp.com>
9 *
10 */
11
12&esdhc {
13	mmc-hs200-1_8v;
14	status = "okay";
15};
16
17&ifc {
18	status = "okay";
19	#address-cells = <2>;
20	#size-cells = <1>;
21	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
22		  0x2 0x0 0x5 0x30000000 0x00010000
23		  0x3 0x0 0x5 0x20000000 0x00010000>;
24
25	nor@0,0 {
26		#address-cells = <1>;
27		#size-cells = <1>;
28		compatible = "cfi-flash";
29		reg = <0x0 0x0 0x8000000>;
30		bank-width = <2>;
31		device-width = <1>;
32	};
33
34	nand@2,0 {
35	     compatible = "fsl,ifc-nand";
36	     reg = <0x2 0x0 0x10000>;
37	};
38
39	cpld@3,0 {
40	     reg = <0x3 0x0 0x10000>;
41	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
42	};
43};
44
45&i2c0 {
46	status = "okay";
47	pca9547@77 {
48		compatible = "nxp,pca9547";
49		reg = <0x77>;
50		#address-cells = <1>;
51		#size-cells = <0>;
52		i2c@0 {
53			#address-cells = <1>;
54			#size-cells = <0>;
55			reg = <0x00>;
56			rtc@68 {
57				compatible = "dallas,ds3232";
58				reg = <0x68>;
59			};
60		};
61
62		i2c@2 {
63			#address-cells = <1>;
64			#size-cells = <0>;
65			reg = <0x02>;
66
67			ina220@40 {
68				compatible = "ti,ina220";
69				reg = <0x40>;
70				shunt-resistor = <500>;
71			};
72
73			ina220@41 {
74				compatible = "ti,ina220";
75				reg = <0x41>;
76				shunt-resistor = <1000>;
77			};
78		};
79
80		i2c@3 {
81			#address-cells = <1>;
82			#size-cells = <0>;
83			reg = <0x3>;
84
85			adt7481@4c {
86				compatible = "adi,adt7461";
87				reg = <0x4c>;
88			};
89		};
90	};
91};
92
93&i2c1 {
94	status = "disabled";
95};
96
97&i2c2 {
98	status = "disabled";
99};
100
101&i2c3 {
102	status = "disabled";
103};
104
105&dspi {
106	status = "okay";
107	dflash0: n25q128a@0 {
108		#address-cells = <1>;
109		#size-cells = <1>;
110		compatible = "st,m25p80";
111		spi-max-frequency = <3000000>;
112		reg = <0>;
113	};
114	dflash1: sst25wf040b@1 {
115		#address-cells = <1>;
116		#size-cells = <1>;
117		compatible = "st,m25p80";
118		spi-max-frequency = <3000000>;
119		reg = <1>;
120	};
121	dflash2: en25s64@2 {
122		#address-cells = <1>;
123		#size-cells = <1>;
124		compatible = "st,m25p80";
125		spi-max-frequency = <3000000>;
126		reg = <2>;
127	};
128};
129
130&qspi {
131	status = "okay";
132	flash0: s25fl256s1@0 {
133		#address-cells = <1>;
134		#size-cells = <1>;
135		compatible = "st,m25p80";
136		spi-max-frequency = <20000000>;
137		spi-rx-bus-width = <4>;
138		spi-tx-bus-width = <4>;
139		reg = <0>;
140	};
141	flash2: s25fl256s1@2 {
142		#address-cells = <1>;
143		#size-cells = <1>;
144		compatible = "st,m25p80";
145		spi-max-frequency = <20000000>;
146		spi-rx-bus-width = <4>;
147		spi-tx-bus-width = <4>;
148		reg = <2>;
149	};
150};
151
152&sata0 {
153	status = "okay";
154};
155
156&sata1 {
157	status = "okay";
158};
159
160&usb0 {
161	status = "okay";
162};
163
164&usb1 {
165	status = "okay";
166};
167