1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree file for NXP LS1088A RDB Board. 4 * 5 * Copyright 2017-2020 NXP 6 * 7 * Harninder Rai <harninder.rai@nxp.com> 8 * 9 */ 10 11/dts-v1/; 12 13#include "fsl-ls1088a.dtsi" 14 15/ { 16 model = "LS1088A RDB Board"; 17 compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; 18}; 19 20&dpmac2 { 21 phy-handle = <&mdio2_aquantia_phy>; 22 phy-connection-type = "10gbase-r"; 23 pcs-handle = <&pcs2>; 24}; 25 26&dpmac3 { 27 phy-handle = <&mdio1_phy5>; 28 phy-connection-type = "qsgmii"; 29 managed = "in-band-status"; 30 pcs-handle = <&pcs3_0>; 31}; 32 33&dpmac4 { 34 phy-handle = <&mdio1_phy6>; 35 phy-connection-type = "qsgmii"; 36 managed = "in-band-status"; 37 pcs-handle = <&pcs3_1>; 38}; 39 40&dpmac5 { 41 phy-handle = <&mdio1_phy7>; 42 phy-connection-type = "qsgmii"; 43 managed = "in-band-status"; 44 pcs-handle = <&pcs3_2>; 45}; 46 47&dpmac6 { 48 phy-handle = <&mdio1_phy8>; 49 phy-connection-type = "qsgmii"; 50 managed = "in-band-status"; 51 pcs-handle = <&pcs3_3>; 52}; 53 54&dpmac7 { 55 phy-handle = <&mdio1_phy1>; 56 phy-connection-type = "qsgmii"; 57 managed = "in-band-status"; 58 pcs-handle = <&pcs7_0>; 59}; 60 61&dpmac8 { 62 phy-handle = <&mdio1_phy2>; 63 phy-connection-type = "qsgmii"; 64 managed = "in-band-status"; 65 pcs-handle = <&pcs7_1>; 66}; 67 68&dpmac9 { 69 phy-handle = <&mdio1_phy3>; 70 phy-connection-type = "qsgmii"; 71 managed = "in-band-status"; 72 pcs-handle = <&pcs7_2>; 73}; 74 75&dpmac10 { 76 phy-handle = <&mdio1_phy4>; 77 phy-connection-type = "qsgmii"; 78 managed = "in-band-status"; 79 pcs-handle = <&pcs7_3>; 80}; 81 82&emdio1 { 83 status = "okay"; 84 85 mdio1_phy5: ethernet-phy@c { 86 interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; 87 reg = <0xc>; 88 }; 89 90 mdio1_phy6: ethernet-phy@d { 91 interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; 92 reg = <0xd>; 93 }; 94 95 mdio1_phy7: ethernet-phy@e { 96 interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; 97 reg = <0xe>; 98 }; 99 100 mdio1_phy8: ethernet-phy@f { 101 interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; 102 reg = <0xf>; 103 }; 104 105 mdio1_phy1: ethernet-phy@1c { 106 interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; 107 reg = <0x1c>; 108 }; 109 110 mdio1_phy2: ethernet-phy@1d { 111 interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; 112 reg = <0x1d>; 113 }; 114 115 mdio1_phy3: ethernet-phy@1e { 116 interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; 117 reg = <0x1e>; 118 }; 119 120 mdio1_phy4: ethernet-phy@1f { 121 interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; 122 reg = <0x1f>; 123 }; 124}; 125 126&emdio2 { 127 status = "okay"; 128 129 mdio2_aquantia_phy: ethernet-phy@0 { 130 compatible = "ethernet-phy-ieee802.3-c45"; 131 interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; 132 reg = <0x0>; 133 }; 134}; 135 136&i2c0 { 137 status = "okay"; 138 139 i2c-mux@77 { 140 compatible = "nxp,pca9547"; 141 reg = <0x77>; 142 #address-cells = <1>; 143 #size-cells = <0>; 144 145 i2c@2 { 146 #address-cells = <1>; 147 #size-cells = <0>; 148 reg = <0x2>; 149 150 ina220@40 { 151 compatible = "ti,ina220"; 152 reg = <0x40>; 153 shunt-resistor = <1000>; 154 }; 155 }; 156 157 i2c@3 { 158 #address-cells = <1>; 159 #size-cells = <0>; 160 reg = <0x3>; 161 162 temp-sensor@4c { 163 compatible = "adi,adt7461a"; 164 reg = <0x4c>; 165 }; 166 167 rtc@51 { 168 compatible = "nxp,pcf2129"; 169 reg = <0x51>; 170 /* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */ 171 interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>; 172 }; 173 }; 174 }; 175}; 176 177&ifc { 178 ranges = <0 0 0x5 0x30000000 0x00010000 179 2 0 0x5 0x20000000 0x00010000>; 180 status = "okay"; 181 182 nand@0,0 { 183 compatible = "fsl,ifc-nand"; 184 reg = <0x0 0x0 0x10000>; 185 }; 186 187 fpga: board-control@2,0 { 188 compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis"; 189 reg = <0x2 0x0 0x0000100>; 190 }; 191}; 192 193&duart0 { 194 status = "okay"; 195}; 196 197&duart1 { 198 status = "okay"; 199}; 200 201&esdhc { 202 mmc-hs200-1_8v; 203 status = "okay"; 204}; 205 206&pcs_mdio2 { 207 status = "okay"; 208}; 209 210&pcs_mdio3 { 211 status = "okay"; 212}; 213 214&pcs_mdio7 { 215 status = "okay"; 216}; 217 218&qspi { 219 status = "okay"; 220 221 s25fs512s0: flash@0 { 222 compatible = "jedec,spi-nor"; 223 #address-cells = <1>; 224 #size-cells = <1>; 225 spi-max-frequency = <50000000>; 226 spi-rx-bus-width = <4>; 227 spi-tx-bus-width = <1>; 228 reg = <0>; 229 }; 230 231 s25fs512s1: flash@1 { 232 compatible = "jedec,spi-nor"; 233 #address-cells = <1>; 234 #size-cells = <1>; 235 spi-max-frequency = <50000000>; 236 spi-rx-bus-width = <4>; 237 spi-tx-bus-width = <1>; 238 reg = <1>; 239 }; 240}; 241 242&sata { 243 status = "okay"; 244}; 245 246&usb0 { 247 status = "okay"; 248}; 249 250&usb1 { 251 dr_mode = "otg"; 252 status = "okay"; 253}; 254