1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree file for NXP LS1088A QDS Board. 4 * 5 * Copyright 2017 NXP 6 * 7 * Harninder Rai <harninder.rai@nxp.com> 8 * 9 */ 10 11/dts-v1/; 12 13#include "fsl-ls1088a.dtsi" 14 15/ { 16 model = "LS1088A QDS Board"; 17 compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; 18}; 19 20&i2c0 { 21 status = "okay"; 22 23 i2c-switch@77 { 24 compatible = "nxp,pca9547"; 25 reg = <0x77>; 26 #address-cells = <1>; 27 #size-cells = <0>; 28 29 i2c@2 { 30 #address-cells = <1>; 31 #size-cells = <0>; 32 reg = <0x2>; 33 34 ina220@40 { 35 compatible = "ti,ina220"; 36 reg = <0x40>; 37 shunt-resistor = <1000>; 38 }; 39 40 ina220@41 { 41 compatible = "ti,ina220"; 42 reg = <0x41>; 43 shunt-resistor = <1000>; 44 }; 45 }; 46 47 i2c@3 { 48 #address-cells = <1>; 49 #size-cells = <0>; 50 reg = <0x3>; 51 52 temp-sensor@4c { 53 compatible = "adi,adt7461a"; 54 reg = <0x4c>; 55 }; 56 57 rtc@51 { 58 compatible = "nxp,pcf2129"; 59 reg = <0x51>; 60 /* IRQ10_B */ 61 interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; 62 }; 63 64 eeprom@56 { 65 compatible = "atmel,24c512"; 66 reg = <0x56>; 67 }; 68 69 eeprom@57 { 70 compatible = "atmel,24c512"; 71 reg = <0x57>; 72 }; 73 }; 74 }; 75}; 76 77&ifc { 78 ranges = <0 0 0x5 0x80000000 0x08000000 79 2 0 0x5 0x30000000 0x00010000 80 3 0 0x5 0x20000000 0x00010000>; 81 status = "okay"; 82 83 nor@0,0 { 84 compatible = "cfi-flash"; 85 reg = <0x0 0x0 0x8000000>; 86 bank-width = <2>; 87 device-width = <1>; 88 }; 89 90 nand@2,0 { 91 compatible = "fsl,ifc-nand"; 92 reg = <0x2 0x0 0x10000>; 93 }; 94 95 fpga: board-control@3,0 { 96 compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis"; 97 reg = <0x3 0x0 0x0000100>; 98 }; 99}; 100 101&duart0 { 102 status = "okay"; 103}; 104 105&duart1 { 106 status = "okay"; 107}; 108 109&esdhc { 110 status = "okay"; 111}; 112 113&sata { 114 status = "okay"; 115}; 116