xref: /linux/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts (revision 9f2c9170934eace462499ba0bfe042cc72900173) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Freescale Layerscape-1043A family SoC.
4 *
5 * Copyright 2014-2015 Freescale Semiconductor, Inc.
6 * Copyright 2018 NXP
7 *
8 * Mingkai Hu <Mingkai.hu@freescale.com>
9 */
10
11/dts-v1/;
12#include "fsl-ls1043a.dtsi"
13
14/ {
15	model = "LS1043A RDB Board";
16	compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
17
18	aliases {
19		serial0 = &duart0;
20		serial1 = &duart1;
21		serial2 = &duart2;
22		serial3 = &duart3;
23	};
24
25	chosen {
26		stdout-path = "serial0:115200n8";
27	};
28};
29
30&i2c0 {
31	status = "okay";
32
33	ina220@40 {
34		compatible = "ti,ina220";
35		reg = <0x40>;
36		shunt-resistor = <1000>;
37	};
38
39	adt7461a@4c {
40		compatible = "adi,adt7461";
41		reg = <0x4c>;
42	};
43
44	rtc@51 {
45		compatible = "nxp,pcf85263";
46		reg = <0x51>;
47	};
48
49	eeprom@52 {
50		compatible = "atmel,24c512";
51		reg = <0x52>;
52	};
53
54	eeprom@53 {
55		compatible = "atmel,24c512";
56		reg = <0x53>;
57	};
58
59	rtc@68 {
60		compatible = "pericom,pt7c4338";
61		reg = <0x68>;
62	};
63};
64
65&ifc {
66	status = "okay";
67	#address-cells = <2>;
68	#size-cells = <1>;
69	/* NOR, NAND Flashes and FPGA on board */
70	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
71		  0x1 0x0 0x0 0x7e800000 0x00010000
72		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
73
74		nor@0,0 {
75			compatible = "cfi-flash";
76			#address-cells = <1>;
77			#size-cells = <1>;
78			reg = <0x0 0x0 0x8000000>;
79			big-endian;
80			bank-width = <2>;
81			device-width = <1>;
82		};
83
84		nand@1,0 {
85			compatible = "fsl,ifc-nand";
86			#address-cells = <1>;
87			#size-cells = <1>;
88			reg = <0x1 0x0 0x10000>;
89		};
90
91		cpld: board-control@2,0 {
92			compatible = "fsl,ls1043ardb-cpld";
93			reg = <0x2 0x0 0x0000100>;
94		};
95};
96
97&dspi0 {
98	bus-num = <0>;
99	status = "okay";
100
101	flash@0 {
102		#address-cells = <1>;
103		#size-cells = <1>;
104		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
105		reg = <0>;
106		spi-max-frequency = <1000000>; /* input clock */
107		fsl,spi-cs-sck-delay = <100>;
108		fsl,spi-sck-cs-delay = <100>;
109	};
110
111	slic@2 {
112		compatible = "maxim,ds26522";
113		reg = <2>;
114		spi-max-frequency = <2000000>;
115		fsl,spi-cs-sck-delay = <100>;
116		fsl,spi-sck-cs-delay = <50>;
117	};
118
119	slic@3 {
120		compatible = "maxim,ds26522";
121		reg = <3>;
122		spi-max-frequency = <2000000>;
123		fsl,spi-cs-sck-delay = <100>;
124		fsl,spi-sck-cs-delay = <50>;
125	};
126};
127
128&duart0 {
129	status = "okay";
130};
131
132&duart1 {
133	status = "okay";
134};
135
136#include "fsl-ls1043-post.dtsi"
137
138&fman0 {
139	ethernet@e0000 {
140		phy-handle = <&qsgmii_phy1>;
141		phy-connection-type = "qsgmii";
142	};
143
144	ethernet@e2000 {
145		phy-handle = <&qsgmii_phy2>;
146		phy-connection-type = "qsgmii";
147	};
148
149	ethernet@e4000 {
150		phy-handle = <&rgmii_phy1>;
151		phy-connection-type = "rgmii-id";
152	};
153
154	ethernet@e6000 {
155		phy-handle = <&rgmii_phy2>;
156		phy-connection-type = "rgmii-id";
157	};
158
159	ethernet@e8000 {
160		phy-handle = <&qsgmii_phy3>;
161		phy-connection-type = "qsgmii";
162	};
163
164	ethernet@ea000 {
165		phy-handle = <&qsgmii_phy4>;
166		phy-connection-type = "qsgmii";
167	};
168
169	ethernet@f0000 { /* 10GEC1 */
170		phy-handle = <&aqr105_phy>;
171		phy-connection-type = "xgmii";
172	};
173
174	mdio@fc000 {
175		rgmii_phy1: ethernet-phy@1 {
176			reg = <0x1>;
177		};
178
179		rgmii_phy2: ethernet-phy@2 {
180			reg = <0x2>;
181		};
182
183		qsgmii_phy1: ethernet-phy@4 {
184			reg = <0x4>;
185		};
186
187		qsgmii_phy2: ethernet-phy@5 {
188			reg = <0x5>;
189		};
190
191		qsgmii_phy3: ethernet-phy@6 {
192			reg = <0x6>;
193		};
194
195		qsgmii_phy4: ethernet-phy@7 {
196			reg = <0x7>;
197		};
198	};
199
200	mdio@fd000 {
201		aqr105_phy: ethernet-phy@1 {
202			compatible = "ethernet-phy-ieee802.3-c45";
203			interrupts = <0 132 4>;
204			reg = <0x1>;
205		};
206	};
207};
208
209&uqe {
210	ucc_hdlc: ucc@2000 {
211		compatible = "fsl,ucc-hdlc";
212		rx-clock-name = "clk8";
213		tx-clock-name = "clk9";
214		fsl,rx-sync-clock = "rsync_pin";
215		fsl,tx-sync-clock = "tsync_pin";
216		fsl,tx-timeslot-mask = <0xfffffffe>;
217		fsl,rx-timeslot-mask = <0xfffffffe>;
218		fsl,tdm-framer-type = "e1";
219		fsl,tdm-id = <0>;
220		fsl,siram-entry-id = <0>;
221		fsl,tdm-interface;
222	};
223};
224
225&usb0 {
226	status = "okay";
227};
228
229&usb1 {
230	status = "okay";
231};
232