xref: /linux/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts (revision 24bce201d79807b668bf9d9e0aca801c5c0d5f78) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree file for NXP LS1028A RDB Board.
4 *
5 * Copyright 2018-2021 NXP
6 *
7 * Harninder Rai <harninder.rai@nxp.com>
8 *
9 */
10
11/dts-v1/;
12#include "fsl-ls1028a.dtsi"
13
14/ {
15	model = "LS1028A RDB Board";
16	compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
17
18	aliases {
19		crypto = &crypto;
20		serial0 = &duart0;
21		serial1 = &duart1;
22		mmc0 = &esdhc;
23		mmc1 = &esdhc1;
24		rtc1 = &ftm_alarm1;
25		spi0 = &fspi;
26		ethernet0 = &enetc_port0;
27		ethernet1 = &enetc_port2;
28		ethernet2 = &mscc_felix_port0;
29		ethernet3 = &mscc_felix_port1;
30		ethernet4 = &mscc_felix_port2;
31		ethernet5 = &mscc_felix_port3;
32	};
33
34	chosen {
35		stdout-path = "serial0:115200n8";
36	};
37
38	memory@80000000 {
39		device_type = "memory";
40		reg = <0x0 0x80000000 0x1 0x0000000>;
41	};
42
43	sys_mclk: clock-mclk {
44		compatible = "fixed-clock";
45		#clock-cells = <0>;
46		clock-frequency = <25000000>;
47	};
48
49	reg_1p8v: regulator-1p8v {
50		compatible = "regulator-fixed";
51		regulator-name = "1P8V";
52		regulator-min-microvolt = <1800000>;
53		regulator-max-microvolt = <1800000>;
54		regulator-always-on;
55	};
56
57	sb_3v3: regulator-sb3v3 {
58		compatible = "regulator-fixed";
59		regulator-name = "3v3_vbus";
60		regulator-min-microvolt = <3300000>;
61		regulator-max-microvolt = <3300000>;
62		regulator-boot-on;
63		regulator-always-on;
64	};
65
66	sound {
67		compatible = "simple-audio-card";
68		simple-audio-card,format = "i2s";
69		simple-audio-card,widgets =
70			"Microphone", "Microphone Jack",
71			"Headphone", "Headphone Jack",
72			"Speaker", "Speaker Ext",
73			"Line", "Line In Jack";
74		simple-audio-card,routing =
75			"MIC_IN", "Microphone Jack",
76			"Microphone Jack", "Mic Bias",
77			"LINE_IN", "Line In Jack",
78			"Headphone Jack", "HP_OUT",
79			"Speaker Ext", "LINE_OUT";
80
81		simple-audio-card,cpu {
82			sound-dai = <&sai4>;
83			frame-master;
84			bitclock-master;
85		};
86
87		simple-audio-card,codec {
88			sound-dai = <&sgtl5000>;
89			frame-master;
90			bitclock-master;
91			system-clock-frequency = <25000000>;
92		};
93	};
94};
95
96&can0 {
97	status = "okay";
98
99	can-transceiver {
100		max-bitrate = <5000000>;
101	};
102};
103
104&can1 {
105	status = "okay";
106
107	can-transceiver {
108		max-bitrate = <5000000>;
109	};
110};
111
112&duart0 {
113	status = "okay";
114};
115
116&duart1 {
117	status = "okay";
118};
119
120&enetc_mdio_pf3 {
121	sgmii_phy0: ethernet-phy@2 {
122		reg = <0x2>;
123	};
124
125	/* VSC8514 QSGMII quad PHY */
126	qsgmii_phy0: ethernet-phy@10 {
127		reg = <0x10>;
128	};
129
130	qsgmii_phy1: ethernet-phy@11 {
131		reg = <0x11>;
132	};
133
134	qsgmii_phy2: ethernet-phy@12 {
135		reg = <0x12>;
136	};
137
138	qsgmii_phy3: ethernet-phy@13 {
139		reg = <0x13>;
140	};
141};
142
143&enetc_port0 {
144	phy-handle = <&sgmii_phy0>;
145	phy-mode = "sgmii";
146	managed = "in-band-status";
147	status = "okay";
148};
149
150&enetc_port2 {
151	status = "okay";
152};
153
154&esdhc {
155	sd-uhs-sdr104;
156	sd-uhs-sdr50;
157	sd-uhs-sdr25;
158	sd-uhs-sdr12;
159	status = "okay";
160};
161
162&esdhc1 {
163	mmc-hs200-1_8v;
164	mmc-hs400-1_8v;
165	bus-width = <8>;
166	status = "okay";
167};
168
169&fspi {
170	status = "okay";
171
172	mt35xu02g0: flash@0 {
173		compatible = "jedec,spi-nor";
174		#address-cells = <1>;
175		#size-cells = <1>;
176		spi-max-frequency = <50000000>;
177		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
178		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
179		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
180		reg = <0>;
181	};
182};
183
184&ftm_alarm1 {
185	status = "okay";
186};
187
188&i2c0 {
189	status = "okay";
190
191	i2c-mux@77 {
192		compatible = "nxp,pca9847";
193		reg = <0x77>;
194		#address-cells = <1>;
195		#size-cells = <0>;
196
197		i2c@1 {
198			#address-cells = <1>;
199			#size-cells = <0>;
200			reg = <0x1>;
201
202			sgtl5000: audio-codec@a {
203				#sound-dai-cells = <0>;
204				compatible = "fsl,sgtl5000";
205				reg = <0xa>;
206				VDDA-supply = <&reg_1p8v>;
207				VDDIO-supply = <&reg_1p8v>;
208				clocks = <&sys_mclk>;
209				sclk-strength = <3>;
210			};
211		};
212
213		i2c@2 {
214			#address-cells = <1>;
215			#size-cells = <0>;
216			reg = <0x02>;
217
218			current-monitor@40 {
219				compatible = "ti,ina220";
220				reg = <0x40>;
221				shunt-resistor = <500>;
222			};
223		};
224
225		i2c@3 {
226			#address-cells = <1>;
227			#size-cells = <0>;
228			reg = <0x3>;
229
230			temperature-sensor@4c {
231				compatible = "nxp,sa56004";
232				reg = <0x4c>;
233				vcc-supply = <&sb_3v3>;
234			};
235
236			rtc@51 {
237				compatible = "nxp,pcf2129";
238				reg = <0x51>;
239			};
240		};
241	};
242};
243
244&mscc_felix {
245	status = "okay";
246};
247
248&mscc_felix_port0 {
249	label = "swp0";
250	managed = "in-band-status";
251	phy-handle = <&qsgmii_phy0>;
252	phy-mode = "qsgmii";
253	status = "okay";
254};
255
256&mscc_felix_port1 {
257	label = "swp1";
258	managed = "in-band-status";
259	phy-handle = <&qsgmii_phy1>;
260	phy-mode = "qsgmii";
261	status = "okay";
262};
263
264&mscc_felix_port2 {
265	label = "swp2";
266	managed = "in-band-status";
267	phy-handle = <&qsgmii_phy2>;
268	phy-mode = "qsgmii";
269	status = "okay";
270};
271
272&mscc_felix_port3 {
273	label = "swp3";
274	managed = "in-band-status";
275	phy-handle = <&qsgmii_phy3>;
276	phy-mode = "qsgmii";
277	status = "okay";
278};
279
280&mscc_felix_port4 {
281	ethernet = <&enetc_port2>;
282	status = "okay";
283};
284
285&optee {
286	status = "okay";
287};
288
289&pwm0 {
290	status = "okay";
291};
292
293&sai4 {
294	status = "okay";
295};
296
297&sata {
298	status = "okay";
299};
300
301&usb0 {
302	dr_mode = "host";
303	status = "okay";
304};
305
306&usb1 {
307	status = "okay";
308};
309