1/* 2 * BSD LICENSE 3 * 4 * Copyright (c) 2015 Broadcom. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * * Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * * Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in 14 * the documentation and/or other materials provided with the 15 * distribution. 16 * * Neither the name of Broadcom Corporation nor the names of its 17 * contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33/memreserve/ 0x81000000 0x00200000; 34 35#include <dt-bindings/interrupt-controller/arm-gic.h> 36#include <dt-bindings/clock/bcm-ns2.h> 37 38/ { 39 compatible = "brcm,ns2"; 40 interrupt-parent = <&gic>; 41 #address-cells = <2>; 42 #size-cells = <2>; 43 44 cpus { 45 #address-cells = <2>; 46 #size-cells = <0>; 47 48 A57_0: cpu@0 { 49 device_type = "cpu"; 50 compatible = "arm,cortex-a57"; 51 reg = <0 0>; 52 enable-method = "psci"; 53 next-level-cache = <&CLUSTER0_L2>; 54 }; 55 56 A57_1: cpu@1 { 57 device_type = "cpu"; 58 compatible = "arm,cortex-a57"; 59 reg = <0 1>; 60 enable-method = "psci"; 61 next-level-cache = <&CLUSTER0_L2>; 62 }; 63 64 A57_2: cpu@2 { 65 device_type = "cpu"; 66 compatible = "arm,cortex-a57"; 67 reg = <0 2>; 68 enable-method = "psci"; 69 next-level-cache = <&CLUSTER0_L2>; 70 }; 71 72 A57_3: cpu@3 { 73 device_type = "cpu"; 74 compatible = "arm,cortex-a57"; 75 reg = <0 3>; 76 enable-method = "psci"; 77 next-level-cache = <&CLUSTER0_L2>; 78 }; 79 80 CLUSTER0_L2: l2-cache@0 { 81 compatible = "cache"; 82 cache-level = <2>; 83 cache-unified; 84 }; 85 }; 86 87 psci { 88 compatible = "arm,psci-1.0"; 89 method = "smc"; 90 }; 91 92 timer { 93 compatible = "arm,armv8-timer"; 94 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) | 95 IRQ_TYPE_LEVEL_LOW)>, 96 <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) | 97 IRQ_TYPE_LEVEL_LOW)>, 98 <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) | 99 IRQ_TYPE_LEVEL_LOW)>, 100 <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) | 101 IRQ_TYPE_LEVEL_LOW)>; 102 }; 103 104 pmu { 105 compatible = "arm,armv8-pmuv3"; 106 interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, 107 <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, 108 <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, 109 <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; 110 interrupt-affinity = <&A57_0>, 111 <&A57_1>, 112 <&A57_2>, 113 <&A57_3>; 114 }; 115 116 pcie0: pcie@20020000 { 117 compatible = "brcm,iproc-pcie"; 118 reg = <0 0x20020000 0 0x1000>; 119 dma-coherent; 120 121 #interrupt-cells = <1>; 122 interrupt-map-mask = <0 0 0 0>; 123 interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; 124 125 linux,pci-domain = <0>; 126 127 bus-range = <0x00 0xff>; 128 129 #address-cells = <3>; 130 #size-cells = <2>; 131 device_type = "pci"; 132 ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>; 133 134 brcm,pcie-ob; 135 brcm,pcie-ob-oarr-size; 136 brcm,pcie-ob-axi-offset = <0x00000000>; 137 brcm,pcie-ob-window-size = <256>; 138 139 status = "disabled"; 140 141 phys = <&pci_phy0>; 142 phy-names = "pcie-phy"; 143 144 msi-parent = <&v2m0>; 145 }; 146 147 pcie4: pcie@50020000 { 148 compatible = "brcm,iproc-pcie"; 149 reg = <0 0x50020000 0 0x1000>; 150 dma-coherent; 151 152 #interrupt-cells = <1>; 153 interrupt-map-mask = <0 0 0 0>; 154 interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; 155 156 linux,pci-domain = <4>; 157 158 bus-range = <0x00 0xff>; 159 160 #address-cells = <3>; 161 #size-cells = <2>; 162 device_type = "pci"; 163 ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>; 164 165 brcm,pcie-ob; 166 brcm,pcie-ob-oarr-size; 167 brcm,pcie-ob-axi-offset = <0x30000000>; 168 brcm,pcie-ob-window-size = <256>; 169 170 status = "disabled"; 171 172 phys = <&pci_phy1>; 173 phy-names = "pcie-phy"; 174 175 msi-parent = <&v2m0>; 176 }; 177 178 pcie8: pcie@60c00000 { 179 compatible = "brcm,iproc-pcie-paxc"; 180 reg = <0 0x60c00000 0 0x1000>; 181 dma-coherent; 182 linux,pci-domain = <8>; 183 184 bus-range = <0x0 0x1>; 185 186 #address-cells = <3>; 187 #size-cells = <2>; 188 device_type = "pci"; 189 ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>; 190 191 status = "disabled"; 192 193 msi-parent = <&v2m0>; 194 }; 195 196 soc: soc { 197 compatible = "simple-bus"; 198 #address-cells = <1>; 199 #size-cells = <1>; 200 ranges = <0 0 0 0xffffffff>; 201 202 #include "ns2-clock.dtsi" 203 204 enet: ethernet@61000000 { 205 compatible = "brcm,ns2-amac"; 206 reg = <0x61000000 0x1000>, 207 <0x61090000 0x1000>, 208 <0x61030000 0x100>; 209 reg-names = "amac_base", "idm_base", "nicpm_base"; 210 interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; 211 dma-coherent; 212 phy-handle = <&gphy0>; 213 phy-mode = "rgmii"; 214 status = "disabled"; 215 }; 216 217 pdc0: iproc-pdc0@612c0000 { 218 compatible = "brcm,iproc-pdc-mbox"; 219 reg = <0x612c0000 0x445>; /* PDC FS0 regs */ 220 interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; 221 #mbox-cells = <1>; 222 dma-coherent; 223 brcm,rx-status-len = <32>; 224 brcm,use-bcm-hdr; 225 }; 226 227 crypto0: crypto@612d0000 { 228 compatible = "brcm,spum-crypto"; 229 reg = <0x612d0000 0x900>; 230 mboxes = <&pdc0 0>; 231 }; 232 233 pdc1: iproc-pdc1@612e0000 { 234 compatible = "brcm,iproc-pdc-mbox"; 235 reg = <0x612e0000 0x445>; /* PDC FS1 regs */ 236 interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; 237 #mbox-cells = <1>; 238 dma-coherent; 239 brcm,rx-status-len = <32>; 240 brcm,use-bcm-hdr; 241 }; 242 243 crypto1: crypto@612f0000 { 244 compatible = "brcm,spum-crypto"; 245 reg = <0x612f0000 0x900>; 246 mboxes = <&pdc1 0>; 247 }; 248 249 pdc2: iproc-pdc2@61300000 { 250 compatible = "brcm,iproc-pdc-mbox"; 251 reg = <0x61300000 0x445>; /* PDC FS2 regs */ 252 interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; 253 #mbox-cells = <1>; 254 dma-coherent; 255 brcm,rx-status-len = <32>; 256 brcm,use-bcm-hdr; 257 }; 258 259 crypto2: crypto@61310000 { 260 compatible = "brcm,spum-crypto"; 261 reg = <0x61310000 0x900>; 262 mboxes = <&pdc2 0>; 263 }; 264 265 pdc3: iproc-pdc3@61320000 { 266 compatible = "brcm,iproc-pdc-mbox"; 267 reg = <0x61320000 0x445>; /* PDC FS3 regs */ 268 interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; 269 #mbox-cells = <1>; 270 dma-coherent; 271 brcm,rx-status-len = <32>; 272 brcm,use-bcm-hdr; 273 }; 274 275 crypto3: crypto@61330000 { 276 compatible = "brcm,spum-crypto"; 277 reg = <0x61330000 0x900>; 278 mboxes = <&pdc3 0>; 279 }; 280 281 dma0: dma-controller@61360000 { 282 compatible = "arm,pl330", "arm,primecell"; 283 reg = <0x61360000 0x1000>; 284 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, 285 <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, 286 <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, 287 <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, 288 <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, 289 <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, 290 <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, 291 <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, 292 <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; 293 #dma-cells = <1>; 294 clocks = <&iprocslow>; 295 clock-names = "apb_pclk"; 296 }; 297 298 smmu: iommu@64000000 { 299 compatible = "arm,mmu-500"; 300 reg = <0x64000000 0x40000>; 301 #global-interrupts = <2>; 302 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, 303 <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, 304 <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, 305 <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, 306 <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>, 307 <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>, 308 <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>, 309 <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, 310 <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, 311 <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, 312 <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, 313 <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, 314 <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, 315 <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, 316 <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, 317 <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, 318 <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, 319 <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, 320 <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, 321 <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, 322 <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, 323 <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, 324 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, 325 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, 326 <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, 327 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, 328 <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, 329 <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, 330 <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, 331 <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, 332 <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, 333 <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, 334 <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, 335 <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; 336 #iommu-cells = <1>; 337 }; 338 339 pinctrl: pinctrl@6501d130 { 340 compatible = "brcm,ns2-pinmux"; 341 reg = <0x6501d130 0x08>, 342 <0x660a0028 0x04>, 343 <0x660009b0 0x40>; 344 }; 345 346 gpio_aon: gpio@65024800 { 347 compatible = "brcm,iproc-gpio"; 348 reg = <0x65024800 0x50>, 349 <0x65024008 0x18>; 350 ngpios = <6>; 351 #gpio-cells = <2>; 352 gpio-controller; 353 }; 354 355 gic: interrupt-controller@65210000 { 356 compatible = "arm,gic-400"; 357 #interrupt-cells = <3>; 358 interrupt-controller; 359 reg = <0x65210000 0x1000>, 360 <0x65220000 0x1000>, 361 <0x65240000 0x2000>, 362 <0x65260000 0x1000>; 363 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | 364 IRQ_TYPE_LEVEL_HIGH)>; 365 366 #address-cells = <1>; 367 #size-cells = <1>; 368 ranges = <0 0x652e0000 0x80000>; 369 370 v2m0: v2m@0 { 371 compatible = "arm,gic-v2m-frame"; 372 interrupt-parent = <&gic>; 373 msi-controller; 374 reg = <0x00000 0x1000>; 375 arm,msi-base-spi = <72>; 376 arm,msi-num-spis = <16>; 377 }; 378 379 v2m1: v2m@10000 { 380 compatible = "arm,gic-v2m-frame"; 381 interrupt-parent = <&gic>; 382 msi-controller; 383 reg = <0x10000 0x1000>; 384 arm,msi-base-spi = <88>; 385 arm,msi-num-spis = <16>; 386 }; 387 388 v2m2: v2m@20000 { 389 compatible = "arm,gic-v2m-frame"; 390 interrupt-parent = <&gic>; 391 msi-controller; 392 reg = <0x20000 0x1000>; 393 arm,msi-base-spi = <104>; 394 arm,msi-num-spis = <16>; 395 }; 396 397 v2m3: v2m@30000 { 398 compatible = "arm,gic-v2m-frame"; 399 interrupt-parent = <&gic>; 400 msi-controller; 401 reg = <0x30000 0x1000>; 402 arm,msi-base-spi = <120>; 403 arm,msi-num-spis = <16>; 404 }; 405 406 v2m4: v2m@40000 { 407 compatible = "arm,gic-v2m-frame"; 408 interrupt-parent = <&gic>; 409 msi-controller; 410 reg = <0x40000 0x1000>; 411 arm,msi-base-spi = <136>; 412 arm,msi-num-spis = <16>; 413 }; 414 415 v2m5: v2m@50000 { 416 compatible = "arm,gic-v2m-frame"; 417 interrupt-parent = <&gic>; 418 msi-controller; 419 reg = <0x50000 0x1000>; 420 arm,msi-base-spi = <152>; 421 arm,msi-num-spis = <16>; 422 }; 423 424 v2m6: v2m@60000 { 425 compatible = "arm,gic-v2m-frame"; 426 interrupt-parent = <&gic>; 427 msi-controller; 428 reg = <0x60000 0x1000>; 429 arm,msi-base-spi = <168>; 430 arm,msi-num-spis = <16>; 431 }; 432 433 v2m7: v2m@70000 { 434 compatible = "arm,gic-v2m-frame"; 435 interrupt-parent = <&gic>; 436 msi-controller; 437 reg = <0x70000 0x1000>; 438 arm,msi-base-spi = <184>; 439 arm,msi-num-spis = <16>; 440 }; 441 }; 442 443 cci@65590000 { 444 compatible = "arm,cci-400"; 445 #address-cells = <1>; 446 #size-cells = <1>; 447 reg = <0x65590000 0x1000>; 448 ranges = <0 0x65590000 0x10000>; 449 450 pmu@9000 { 451 compatible = "arm,cci-400-pmu,r1", 452 "arm,cci-400-pmu"; 453 reg = <0x9000 0x4000>; 454 interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, 455 <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, 456 <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, 457 <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, 458 <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, 459 <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; 460 }; 461 }; 462 463 usbdrd_phy: phy@66000960 { 464 #phy-cells = <0>; 465 compatible = "brcm,ns2-drd-phy"; 466 reg = <0x66000960 0x24>, 467 <0x67012800 0x4>, 468 <0x6501d148 0x4>, 469 <0x664d0700 0x4>; 470 reg-names = "icfg", "rst-ctrl", 471 "crmu-ctrl", "usb2-strap"; 472 id-gpios = <&gpio_g 30 0>; 473 vbus-gpios = <&gpio_g 31 0>; 474 status = "disabled"; 475 }; 476 477 pwm: pwm@66010000 { 478 compatible = "brcm,iproc-pwm"; 479 reg = <0x66010000 0x28>; 480 clocks = <&osc>; 481 #pwm-cells = <3>; 482 status = "disabled"; 483 }; 484 485 mdio_mux_iproc: mdio-mux@66020000 { 486 compatible = "brcm,mdio-mux-iproc"; 487 reg = <0x66020000 0x250>; 488 #address-cells = <1>; 489 #size-cells = <0>; 490 491 mdio@0 { 492 reg = <0x0>; 493 #address-cells = <1>; 494 #size-cells = <0>; 495 496 pci_phy0: pci-phy@0 { 497 compatible = "brcm,ns2-pcie-phy"; 498 reg = <0x0>; 499 #phy-cells = <0>; 500 status = "disabled"; 501 }; 502 }; 503 504 mdio@7 { 505 reg = <0x7>; 506 #address-cells = <1>; 507 #size-cells = <0>; 508 509 pci_phy1: pci-phy@0 { 510 compatible = "brcm,ns2-pcie-phy"; 511 reg = <0x0>; 512 #phy-cells = <0>; 513 status = "disabled"; 514 }; 515 }; 516 517 mdio@10 { 518 reg = <0x10>; 519 #address-cells = <1>; 520 #size-cells = <0>; 521 }; 522 }; 523 524 timer0: timer@66030000 { 525 compatible = "arm,sp804", "arm,primecell"; 526 reg = <0x66030000 0x1000>; 527 interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>; 528 clocks = <&iprocslow>, 529 <&iprocslow>, 530 <&iprocslow>; 531 clock-names = "timer1", "timer2", "apb_pclk"; 532 }; 533 534 timer1: timer@66040000 { 535 compatible = "arm,sp804", "arm,primecell"; 536 reg = <0x66040000 0x1000>; 537 interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; 538 clocks = <&iprocslow>, 539 <&iprocslow>, 540 <&iprocslow>; 541 clock-names = "timer1", "timer2", "apb_pclk"; 542 }; 543 544 timer2: timer@66050000 { 545 compatible = "arm,sp804", "arm,primecell"; 546 reg = <0x66050000 0x1000>; 547 interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>; 548 clocks = <&iprocslow>, 549 <&iprocslow>, 550 <&iprocslow>; 551 clock-names = "timer1", "timer2", "apb_pclk"; 552 }; 553 554 timer3: timer@66060000 { 555 compatible = "arm,sp804", "arm,primecell"; 556 reg = <0x66060000 0x1000>; 557 interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>; 558 clocks = <&iprocslow>, 559 <&iprocslow>, 560 <&iprocslow>; 561 clock-names = "timer1", "timer2", "apb_pclk"; 562 }; 563 564 i2c0: i2c@66080000 { 565 compatible = "brcm,iproc-i2c"; 566 reg = <0x66080000 0x100>; 567 #address-cells = <1>; 568 #size-cells = <0>; 569 interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>; 570 clock-frequency = <100000>; 571 status = "disabled"; 572 }; 573 574 wdt0: watchdog@66090000 { 575 compatible = "arm,sp805", "arm,primecell"; 576 reg = <0x66090000 0x1000>; 577 interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; 578 clocks = <&iprocslow>, <&iprocslow>; 579 clock-names = "wdog_clk", "apb_pclk"; 580 }; 581 582 gpio_g: gpio@660a0000 { 583 compatible = "brcm,iproc-gpio"; 584 reg = <0x660a0000 0x50>; 585 ngpios = <32>; 586 #gpio-cells = <2>; 587 gpio-controller; 588 interrupt-controller; 589 interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>; 590 }; 591 592 i2c1: i2c@660b0000 { 593 compatible = "brcm,iproc-i2c"; 594 reg = <0x660b0000 0x100>; 595 #address-cells = <1>; 596 #size-cells = <0>; 597 interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>; 598 clock-frequency = <100000>; 599 status = "disabled"; 600 }; 601 602 uart0: serial@66100000 { 603 compatible = "snps,dw-apb-uart"; 604 reg = <0x66100000 0x100>; 605 interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>; 606 clocks = <&iprocslow>; 607 reg-shift = <2>; 608 reg-io-width = <4>; 609 status = "disabled"; 610 }; 611 612 uart1: serial@66110000 { 613 compatible = "snps,dw-apb-uart"; 614 reg = <0x66110000 0x100>; 615 interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>; 616 clocks = <&iprocslow>; 617 reg-shift = <2>; 618 reg-io-width = <4>; 619 status = "disabled"; 620 }; 621 622 uart2: serial@66120000 { 623 compatible = "snps,dw-apb-uart"; 624 reg = <0x66120000 0x100>; 625 interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>; 626 clocks = <&iprocslow>; 627 reg-shift = <2>; 628 reg-io-width = <4>; 629 status = "disabled"; 630 }; 631 632 uart3: serial@66130000 { 633 compatible = "snps,dw-apb-uart"; 634 reg = <0x66130000 0x100>; 635 interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; 636 reg-shift = <2>; 637 reg-io-width = <4>; 638 clocks = <&osc>; 639 status = "disabled"; 640 }; 641 642 ssp0: spi@66180000 { 643 compatible = "arm,pl022", "arm,primecell"; 644 reg = <0x66180000 0x1000>; 645 interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; 646 clocks = <&iprocslow>, <&iprocslow>; 647 clock-names = "sspclk", "apb_pclk"; 648 #address-cells = <1>; 649 #size-cells = <0>; 650 status = "disabled"; 651 }; 652 653 ssp1: spi@66190000 { 654 compatible = "arm,pl022", "arm,primecell"; 655 reg = <0x66190000 0x1000>; 656 interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; 657 clocks = <&iprocslow>, <&iprocslow>; 658 clock-names = "sspclk", "apb_pclk"; 659 #address-cells = <1>; 660 #size-cells = <0>; 661 status = "disabled"; 662 }; 663 664 hwrng: hwrng@66220000 { 665 compatible = "brcm,iproc-rng200"; 666 reg = <0x66220000 0x28>; 667 }; 668 669 sata_phy: sata_phy@663f0100 { 670 compatible = "brcm,iproc-ns2-sata-phy"; 671 reg = <0x663f0100 0x1f00>, 672 <0x663f004c 0x10>; 673 reg-names = "phy", "phy-ctrl"; 674 #address-cells = <1>; 675 #size-cells = <0>; 676 677 sata_phy0: sata-phy@0 { 678 reg = <0>; 679 #phy-cells = <0>; 680 status = "disabled"; 681 }; 682 683 sata_phy1: sata-phy@1 { 684 reg = <1>; 685 #phy-cells = <0>; 686 status = "disabled"; 687 }; 688 }; 689 690 sata: sata@663f2000 { 691 compatible = "brcm,iproc-ahci", "generic-ahci"; 692 reg = <0x663f2000 0x1000>; 693 dma-coherent; 694 reg-names = "ahci"; 695 interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>; 696 #address-cells = <1>; 697 #size-cells = <0>; 698 status = "disabled"; 699 700 sata0: sata-port@0 { 701 reg = <0>; 702 phys = <&sata_phy0>; 703 phy-names = "sata-phy"; 704 }; 705 706 sata1: sata-port@1 { 707 reg = <1>; 708 phys = <&sata_phy1>; 709 phy-names = "sata-phy"; 710 }; 711 }; 712 713 sdio0: sdhci@66420000 { 714 compatible = "brcm,sdhci-iproc-cygnus"; 715 reg = <0x66420000 0x100>; 716 interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; 717 dma-coherent; 718 bus-width = <8>; 719 clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; 720 status = "disabled"; 721 }; 722 723 sdio1: sdhci@66430000 { 724 compatible = "brcm,sdhci-iproc-cygnus"; 725 reg = <0x66430000 0x100>; 726 interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; 727 dma-coherent; 728 bus-width = <8>; 729 clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; 730 status = "disabled"; 731 }; 732 733 nand: nand@66460000 { 734 compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; 735 reg = <0x66460000 0x600>, 736 <0x67015408 0x600>, 737 <0x66460f00 0x20>; 738 reg-names = "nand", "iproc-idm", "iproc-ext"; 739 interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; 740 741 #address-cells = <1>; 742 #size-cells = <0>; 743 744 brcm,nand-has-wp; 745 }; 746 747 qspi: spi@66470200 { 748 compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi"; 749 reg = <0x66470200 0x184>, 750 <0x66470000 0x124>, 751 <0x67017408 0x004>, 752 <0x664703a0 0x01c>; 753 reg-names = "mspi", "bspi", "intr_regs", 754 "intr_status_reg"; 755 interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>; 756 interrupt-names = "spi_l1_intr"; 757 clocks = <&iprocmed>; 758 clock-names = "iprocmed"; 759 num-cs = <2>; 760 #address-cells = <1>; 761 #size-cells = <0>; 762 }; 763 764 }; 765}; 766