xref: /linux/arch/arm64/boot/dts/arm/juno-base.dtsi (revision 93df8a1ed6231727c5db94a80b1a6bd5ee67cec3)
1	/*
2	 *  Devices shared by all Juno boards
3	 */
4
5	memtimer: timer@2a810000 {
6		compatible = "arm,armv7-timer-mem";
7		reg = <0x0 0x2a810000 0x0 0x10000>;
8		clock-frequency = <50000000>;
9		#address-cells = <2>;
10		#size-cells = <2>;
11		ranges;
12		status = "disabled";
13		frame@2a830000 {
14			frame-number = <1>;
15			interrupts = <0 60 4>;
16			reg = <0x0 0x2a830000 0x0 0x10000>;
17		};
18	};
19
20	gic: interrupt-controller@2c010000 {
21		compatible = "arm,gic-400", "arm,cortex-a15-gic";
22		reg = <0x0 0x2c010000 0 0x1000>,
23		      <0x0 0x2c02f000 0 0x2000>,
24		      <0x0 0x2c04f000 0 0x2000>,
25		      <0x0 0x2c06f000 0 0x2000>;
26		#address-cells = <2>;
27		#interrupt-cells = <3>;
28		#size-cells = <2>;
29		interrupt-controller;
30		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
31		ranges = <0 0 0 0x2c1c0000 0 0x40000>;
32		v2m_0: v2m@0 {
33			compatible = "arm,gic-v2m-frame";
34			msi-controller;
35			reg = <0 0 0 0x1000>;
36		};
37	};
38
39	timer {
40		compatible = "arm,armv8-timer";
41		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
42			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
43			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
44			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
45	};
46
47	/include/ "juno-clocks.dtsi"
48
49	dma@7ff00000 {
50		compatible = "arm,pl330", "arm,primecell";
51		reg = <0x0 0x7ff00000 0 0x1000>;
52		#dma-cells = <1>;
53		#dma-channels = <8>;
54		#dma-requests = <32>;
55		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
56			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
57			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
58			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
59			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
60			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
61			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
62			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
63		clocks = <&soc_faxiclk>;
64		clock-names = "apb_pclk";
65	};
66
67	soc_uart0: uart@7ff80000 {
68		compatible = "arm,pl011", "arm,primecell";
69		reg = <0x0 0x7ff80000 0x0 0x1000>;
70		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
71		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
72		clock-names = "uartclk", "apb_pclk";
73	};
74
75	i2c@7ffa0000 {
76		compatible = "snps,designware-i2c";
77		reg = <0x0 0x7ffa0000 0x0 0x1000>;
78		#address-cells = <1>;
79		#size-cells = <0>;
80		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
81		clock-frequency = <400000>;
82		i2c-sda-hold-time-ns = <500>;
83		clocks = <&soc_smc50mhz>;
84
85		dvi0: dvi-transmitter@70 {
86			compatible = "nxp,tda998x";
87			reg = <0x70>;
88		};
89
90		dvi1: dvi-transmitter@71 {
91			compatible = "nxp,tda998x";
92			reg = <0x71>;
93		};
94	};
95
96	ohci@7ffb0000 {
97		compatible = "generic-ohci";
98		reg = <0x0 0x7ffb0000 0x0 0x10000>;
99		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
100		clocks = <&soc_usb48mhz>;
101	};
102
103	ehci@7ffc0000 {
104		compatible = "generic-ehci";
105		reg = <0x0 0x7ffc0000 0x0 0x10000>;
106		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
107		clocks = <&soc_usb48mhz>;
108	};
109
110	memory-controller@7ffd0000 {
111		compatible = "arm,pl354", "arm,primecell";
112		reg = <0 0x7ffd0000 0 0x1000>;
113		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
114			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
115		clocks = <&soc_smc50mhz>;
116		clock-names = "apb_pclk";
117	};
118
119	memory@80000000 {
120		device_type = "memory";
121		/* last 16MB of the first memory area is reserved for secure world use by firmware */
122		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
123		      <0x00000008 0x80000000 0x1 0x80000000>;
124	};
125
126	smb {
127		compatible = "simple-bus";
128		#address-cells = <2>;
129		#size-cells = <1>;
130		ranges = <0 0 0 0x08000000 0x04000000>,
131			 <1 0 0 0x14000000 0x04000000>,
132			 <2 0 0 0x18000000 0x04000000>,
133			 <3 0 0 0x1c000000 0x04000000>,
134			 <4 0 0 0x0c000000 0x04000000>,
135			 <5 0 0 0x10000000 0x04000000>;
136
137		#interrupt-cells = <1>;
138		interrupt-map-mask = <0 0 15>;
139		interrupt-map = <0 0  0 &gic 0 0 0  68 IRQ_TYPE_LEVEL_HIGH>,
140				<0 0  1 &gic 0 0 0  69 IRQ_TYPE_LEVEL_HIGH>,
141				<0 0  2 &gic 0 0 0  70 IRQ_TYPE_LEVEL_HIGH>,
142				<0 0  3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
143				<0 0  4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
144				<0 0  5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
145				<0 0  6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
146				<0 0  7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
147				<0 0  8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
148				<0 0  9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
149				<0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
150				<0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
151				<0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
152
153		/include/ "juno-motherboard.dtsi"
154	};
155