1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. 4 * Copyright (c) 2017 BayLibre, SAS 5 * Author: Neil Armstrong <narmstrong@baylibre.com> 6 */ 7 8/dts-v1/; 9 10#include "meson-gxm.dtsi" 11#include <dt-bindings/input/input.h> 12#include <dt-bindings/sound/meson-aiu.h> 13 14/ { 15 compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm"; 16 model = "Khadas VIM2"; 17 18 aliases { 19 serial0 = &uart_AO; 20 serial2 = &uart_AO_B; 21 }; 22 23 chosen { 24 stdout-path = "serial0:115200n8"; 25 }; 26 27 memory@0 { 28 device_type = "memory"; 29 reg = <0x0 0x0 0x0 0x80000000>; 30 }; 31 32 adc-keys { 33 compatible = "adc-keys"; 34 io-channels = <&saradc 0>; 35 io-channel-names = "buttons"; 36 keyup-threshold-microvolt = <1710000>; 37 38 button-function { 39 label = "Function"; 40 linux,code = <KEY_FN>; 41 press-threshold-microvolt = <10000>; 42 }; 43 }; 44 45 emmc_pwrseq: emmc-pwrseq { 46 compatible = "mmc-pwrseq-emmc"; 47 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; 48 }; 49 50 gpio_fan: gpio-fan { 51 compatible = "gpio-fan"; 52 gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH 53 &gpio GPIODV_15 GPIO_ACTIVE_HIGH>; 54 /* Dummy RPM values since fan is optional */ 55 gpio-fan,speed-map = 56 <0 0>, 57 <1 1>, 58 <2 2>, 59 <3 3>; 60 #cooling-cells = <2>; 61 }; 62 63 gpio-keys-polled { 64 compatible = "gpio-keys-polled"; 65 poll-interval = <100>; 66 67 power-button { 68 label = "power"; 69 linux,code = <KEY_POWER>; 70 gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; 71 }; 72 }; 73 74 hdmi-connector { 75 compatible = "hdmi-connector"; 76 type = "a"; 77 78 port { 79 hdmi_connector_in: endpoint { 80 remote-endpoint = <&hdmi_tx_tmds_out>; 81 }; 82 }; 83 }; 84 85 led-controller { 86 compatible = "pwm-leds"; 87 88 led-1 { 89 label = "vim:red:power"; 90 pwms = <&pwm_AO_ab 1 7812500 0>; 91 max-brightness = <255>; 92 linux,default-trigger = "default-on"; 93 }; 94 }; 95 96 sdio_pwrseq: sdio-pwrseq { 97 compatible = "mmc-pwrseq-simple"; 98 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; 99 clocks = <&wifi32k>; 100 clock-names = "ext_clock"; 101 }; 102 103 hdmi_5v: regulator-hdmi-5v { 104 compatible = "regulator-fixed"; 105 106 regulator-name = "HDMI_5V"; 107 regulator-min-microvolt = <5000000>; 108 regulator-max-microvolt = <5000000>; 109 110 gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; 111 enable-active-high; 112 regulator-always-on; 113 }; 114 115 vcc_3v3: regulator-vcc_3v3 { 116 compatible = "regulator-fixed"; 117 regulator-name = "VCC_3V3"; 118 regulator-min-microvolt = <3300000>; 119 regulator-max-microvolt = <3300000>; 120 }; 121 122 vddio_ao18: regulator-vddio_ao18 { 123 compatible = "regulator-fixed"; 124 regulator-name = "VDDIO_AO18"; 125 regulator-min-microvolt = <1800000>; 126 regulator-max-microvolt = <1800000>; 127 }; 128 129 vddio_boot: regulator-vddio_boot { 130 compatible = "regulator-fixed"; 131 regulator-name = "VDDIO_BOOT"; 132 regulator-min-microvolt = <1800000>; 133 regulator-max-microvolt = <1800000>; 134 }; 135 136 vddao_3v3: regulator-vddao_3v3 { 137 compatible = "regulator-fixed"; 138 regulator-name = "VDDAO_3V3"; 139 regulator-min-microvolt = <3300000>; 140 regulator-max-microvolt = <3300000>; 141 }; 142 143 wifi32k: wifi32k { 144 compatible = "pwm-clock"; 145 #clock-cells = <0>; 146 clock-frequency = <32768>; 147 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ 148 }; 149 150 sound { 151 compatible = "amlogic,gx-sound-card"; 152 model = "KHADAS-VIM2"; 153 assigned-clocks = <&clkc CLKID_MPLL0>, 154 <&clkc CLKID_MPLL1>, 155 <&clkc CLKID_MPLL2>; 156 assigned-clock-parents = <0>, <0>, <0>; 157 assigned-clock-rates = <294912000>, 158 <270950400>, 159 <393216000>; 160 161 dai-link-0 { 162 sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; 163 }; 164 165 dai-link-1 { 166 sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; 167 dai-format = "i2s"; 168 mclk-fs = <256>; 169 170 codec-0 { 171 sound-dai = <&aiu AIU_HDMI CTRL_I2S>; 172 }; 173 }; 174 175 dai-link-2 { 176 sound-dai = <&aiu AIU_HDMI CTRL_OUT>; 177 178 codec-0 { 179 sound-dai = <&hdmi_tx>; 180 }; 181 }; 182 }; 183}; 184 185&aiu { 186 status = "okay"; 187}; 188 189&cec_AO { 190 status = "okay"; 191 pinctrl-0 = <&ao_cec_pins>; 192 pinctrl-names = "default"; 193 hdmi-phandle = <&hdmi_tx>; 194}; 195 196&cpu_cooling_maps { 197 map0 { 198 cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>; 199 }; 200 201 map1 { 202 cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>, 203 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 204 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 205 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 206 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 207 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 208 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 209 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 210 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 211 }; 212}; 213 214ðmac { 215 pinctrl-0 = <ð_pins>; 216 pinctrl-names = "default"; 217 218 /* Select external PHY by default */ 219 phy-handle = <&external_phy>; 220 221 amlogic,tx-delay-ns = <2>; 222 223 /* External PHY is in RGMII */ 224 phy-mode = "rgmii"; 225 226 status = "okay"; 227}; 228 229&external_mdio { 230 external_phy: ethernet-phy@0 { 231 /* Realtek RTL8211F (0x001cc916) */ 232 reg = <0>; 233 234 reset-assert-us = <10000>; 235 reset-deassert-us = <80000>; 236 reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; 237 238 interrupt-parent = <&gpio_intc>; 239 /* MAC_INTR on GPIOZ_15 */ 240 interrupts = <25 IRQ_TYPE_LEVEL_LOW>; 241 }; 242}; 243 244&hdmi_tx { 245 status = "okay"; 246 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; 247 pinctrl-names = "default"; 248 hdmi-supply = <&hdmi_5v>; 249}; 250 251&hdmi_tx_tmds_port { 252 hdmi_tx_tmds_out: endpoint { 253 remote-endpoint = <&hdmi_connector_in>; 254 }; 255}; 256 257&i2c_A { 258 status = "okay"; 259 pinctrl-0 = <&i2c_a_pins>; 260 pinctrl-names = "default"; 261}; 262 263&i2c_B { 264 status = "okay"; 265 pinctrl-0 = <&i2c_b_pins>; 266 pinctrl-names = "default"; 267 268 rtc: rtc@51 { 269 status = "okay"; 270 compatible = "haoyu,hym8563"; 271 reg = <0x51>; 272 #clock-cells = <0>; 273 clock-output-names = "xin32k"; 274 }; 275}; 276 277&ir { 278 status = "okay"; 279 pinctrl-0 = <&remote_input_ao_pins>; 280 pinctrl-names = "default"; 281 linux,rc-map-name = "rc-khadas"; 282}; 283 284&pwm_AO_ab { 285 status = "okay"; 286 pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; 287 pinctrl-names = "default"; 288 clocks = <&clkc CLKID_FCLK_DIV4>; 289 clock-names = "clkin0"; 290}; 291 292&pwm_ef { 293 status = "okay"; 294 pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; 295 pinctrl-names = "default"; 296 clocks = <&clkc CLKID_FCLK_DIV4>; 297 clock-names = "clkin0"; 298}; 299 300&sd_emmc_a { 301 status = "okay"; 302 pinctrl-0 = <&sdio_pins>; 303 pinctrl-1 = <&sdio_clk_gate_pins>; 304 pinctrl-names = "default", "clk-gate"; 305 #address-cells = <1>; 306 #size-cells = <0>; 307 308 bus-width = <4>; 309 cap-sd-highspeed; 310 max-frequency = <100000000>; 311 312 non-removable; 313 disable-wp; 314 315 /* WiFi firmware requires power to be kept while in suspend */ 316 keep-power-in-suspend; 317 318 mmc-pwrseq = <&sdio_pwrseq>; 319 320 vmmc-supply = <&vddao_3v3>; 321 vqmmc-supply = <&vddio_boot>; 322 323 brcmf: wifi@1 { 324 reg = <1>; 325 compatible = "brcm,bcm4329-fmac"; 326 }; 327}; 328 329/* SD card */ 330&sd_emmc_b { 331 status = "okay"; 332 pinctrl-0 = <&sdcard_pins>; 333 pinctrl-1 = <&sdcard_clk_gate_pins>; 334 pinctrl-names = "default", "clk-gate"; 335 336 bus-width = <4>; 337 cap-sd-highspeed; 338 max-frequency = <50000000>; 339 disable-wp; 340 341 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; 342 343 vmmc-supply = <&vddao_3v3>; 344 vqmmc-supply = <&vddio_boot>; 345}; 346 347/* eMMC */ 348&sd_emmc_c { 349 status = "okay"; 350 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; 351 pinctrl-1 = <&emmc_clk_gate_pins>; 352 pinctrl-names = "default", "clk-gate"; 353 354 bus-width = <8>; 355 cap-mmc-highspeed; 356 max-frequency = <200000000>; 357 non-removable; 358 disable-wp; 359 mmc-ddr-1_8v; 360 mmc-hs200-1_8v; 361 362 mmc-pwrseq = <&emmc_pwrseq>; 363 vmmc-supply = <&vcc_3v3>; 364 vqmmc-supply = <&vddio_boot>; 365}; 366 367/* 368 * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe 369 * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled 370 */ 371&spifc { 372 status = "disabled"; 373 pinctrl-0 = <&nor_pins>; 374 pinctrl-names = "default"; 375 376 w25q32: flash@0 { 377 #address-cells = <1>; 378 #size-cells = <1>; 379 compatible = "winbond,w25q16", "jedec,spi-nor"; 380 reg = <0>; 381 spi-max-frequency = <104000000>; 382 }; 383}; 384 385/* This one is connected to the Bluetooth module */ 386&uart_A { 387 status = "okay"; 388 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; 389 pinctrl-names = "default"; 390 uart-has-rtscts; 391 392 bluetooth { 393 compatible = "brcm,bcm43438-bt"; 394 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; 395 max-speed = <2000000>; 396 clocks = <&wifi32k>; 397 clock-names = "lpo"; 398 }; 399}; 400 401/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ 402&uart_AO { 403 status = "okay"; 404 pinctrl-0 = <&uart_ao_a_pins>; 405 pinctrl-names = "default"; 406}; 407 408/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */ 409&uart_AO_B { 410 status = "okay"; 411 pinctrl-0 = <&uart_ao_b_pins>; 412 pinctrl-names = "default"; 413}; 414 415&saradc { 416 status = "okay"; 417 vref-supply = <&vddio_ao18>; 418}; 419 420&usb { 421 status = "okay"; 422 dr_mode = "peripheral"; 423}; 424