xref: /linux/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi (revision a3a02a52bcfcbcc4a637d4b68bf1bc391c9fad02) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2016 Endless Computers, Inc.
4 * Author: Carlo Caione <carlo@endlessm.com>
5 */
6
7#include "meson-gx.dtsi"
8#include <dt-bindings/clock/gxbb-clkc.h>
9#include <dt-bindings/clock/gxbb-aoclkc.h>
10#include <dt-bindings/gpio/meson-gxl-gpio.h>
11#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
12
13/ {
14	compatible = "amlogic,meson-gxl";
15
16	soc {
17		usb: usb@d0078080 {
18			compatible = "amlogic,meson-gxl-usb-ctrl";
19			reg = <0x0 0xd0078080 0x0 0x20>;
20			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
21			#address-cells = <2>;
22			#size-cells = <2>;
23			ranges;
24
25			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
26			clock-names = "usb_ctrl", "ddr";
27			resets = <&reset RESET_USB_OTG>;
28
29			dr_mode = "otg";
30
31			phys = <&usb2_phy0>, <&usb2_phy1>;
32			phy-names = "usb2-phy0", "usb2-phy1";
33
34			dwc2: usb@c9100000 {
35				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
36				reg = <0x0 0xc9100000 0x0 0x40000>;
37				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
38				clocks = <&clkc CLKID_USB1>;
39				clock-names = "otg";
40				phys = <&usb2_phy1>;
41				dr_mode = "peripheral";
42				g-rx-fifo-size = <192>;
43				g-np-tx-fifo-size = <128>;
44				g-tx-fifo-size = <128 128 16 16 16>;
45			};
46
47			dwc3: usb@c9000000 {
48				compatible = "snps,dwc3";
49				reg = <0x0 0xc9000000 0x0 0x100000>;
50				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
51				dr_mode = "host";
52				maximum-speed = "high-speed";
53				snps,dis_u2_susphy_quirk;
54			};
55		};
56
57		acodec: audio-controller@c8832000 {
58			compatible = "amlogic,t9015";
59			reg = <0x0 0xc8832000 0x0 0x14>;
60			#sound-dai-cells = <0>;
61			sound-name-prefix = "ACODEC";
62			clocks = <&clkc CLKID_ACODEC>;
63			clock-names = "pclk";
64			resets = <&reset RESET_ACODEC>;
65			status = "disabled";
66		};
67
68		crypto: crypto@c883e000 {
69			compatible = "amlogic,gxl-crypto";
70			reg = <0x0 0xc883e000 0x0 0x36>;
71			interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
72				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
73			clocks = <&clkc CLKID_BLKMV>;
74			clock-names = "blkmv";
75			status = "okay";
76		};
77	};
78};
79
80&aiu {
81	compatible = "amlogic,aiu-gxl", "amlogic,aiu";
82	clocks = <&clkc CLKID_AIU_GLUE>,
83		 <&clkc CLKID_I2S_OUT>,
84		 <&clkc CLKID_AOCLK_GATE>,
85		 <&clkc CLKID_CTS_AMCLK>,
86		 <&clkc CLKID_MIXER_IFACE>,
87		 <&clkc CLKID_IEC958>,
88		 <&clkc CLKID_IEC958_GATE>,
89		 <&clkc CLKID_CTS_MCLK_I958>,
90		 <&clkc CLKID_CTS_I958>;
91	clock-names = "pclk",
92		      "i2s_pclk",
93		      "i2s_aoclk",
94		      "i2s_mclk",
95		      "i2s_mixer",
96		      "spdif_pclk",
97		      "spdif_aoclk",
98		      "spdif_mclk",
99		      "spdif_mclk_sel";
100	resets = <&reset RESET_AIU>;
101};
102
103&apb {
104	usb2_phy0: phy@78000 {
105		compatible = "amlogic,meson-gxl-usb2-phy";
106		#phy-cells = <0>;
107		reg = <0x0 0x78000 0x0 0x20>;
108		clocks = <&clkc CLKID_USB>;
109		clock-names = "phy";
110		resets = <&reset RESET_USB_OTG>;
111		reset-names = "phy";
112		status = "okay";
113	};
114
115	usb2_phy1: phy@78020 {
116		compatible = "amlogic,meson-gxl-usb2-phy";
117		#phy-cells = <0>;
118		reg = <0x0 0x78020 0x0 0x20>;
119		clocks = <&clkc CLKID_USB>;
120		clock-names = "phy";
121		resets = <&reset RESET_USB_OTG>;
122		reset-names = "phy";
123		status = "okay";
124	};
125};
126
127&efuse {
128	clocks = <&clkc CLKID_EFUSE>;
129};
130
131&ethmac {
132	clocks = <&clkc CLKID_ETH>,
133		 <&clkc CLKID_FCLK_DIV2>,
134		 <&clkc CLKID_MPLL2>,
135		 <&clkc CLKID_FCLK_DIV2>;
136	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
137
138	mdio0: mdio {
139		#address-cells = <1>;
140		#size-cells = <0>;
141		compatible = "snps,dwmac-mdio";
142	};
143};
144
145&aobus {
146	pinctrl_aobus: pinctrl@14 {
147		compatible = "amlogic,meson-gxl-aobus-pinctrl";
148		#address-cells = <2>;
149		#size-cells = <2>;
150		ranges;
151
152		gpio_ao: bank@14 {
153			reg = <0x0 0x00014 0x0 0x8>,
154			      <0x0 0x0002c 0x0 0x4>,
155			      <0x0 0x00024 0x0 0x8>;
156			reg-names = "mux", "pull", "gpio";
157			gpio-controller;
158			#gpio-cells = <2>;
159			gpio-ranges = <&pinctrl_aobus 0 0 14>;
160		};
161
162		uart_ao_a_pins: uart_ao_a {
163			mux {
164				groups = "uart_tx_ao_a", "uart_rx_ao_a";
165				function = "uart_ao";
166				bias-disable;
167			};
168		};
169
170		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
171			mux {
172				groups = "uart_cts_ao_a",
173				       "uart_rts_ao_a";
174				function = "uart_ao";
175				bias-disable;
176			};
177		};
178
179		uart_ao_b_pins: uart_ao_b {
180			mux {
181				groups = "uart_tx_ao_b", "uart_rx_ao_b";
182				function = "uart_ao_b";
183				bias-disable;
184			};
185		};
186
187		uart_ao_b_0_1_pins: uart_ao_b_0_1 {
188			mux {
189				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
190				function = "uart_ao_b";
191				bias-disable;
192			};
193		};
194
195		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
196			mux {
197				groups = "uart_cts_ao_b",
198				       "uart_rts_ao_b";
199				function = "uart_ao_b";
200				bias-disable;
201			};
202		};
203
204		remote_input_ao_pins: remote_input_ao {
205			mux {
206				groups = "remote_input_ao";
207				function = "remote_input_ao";
208				bias-disable;
209			};
210		};
211
212		i2c_ao_pins: i2c_ao {
213			mux {
214				groups = "i2c_sck_ao",
215				       "i2c_sda_ao";
216				function = "i2c_ao";
217				bias-disable;
218			};
219		};
220
221		pwm_ao_a_3_pins: pwm_ao_a_3 {
222			mux {
223				groups = "pwm_ao_a_3";
224				function = "pwm_ao_a";
225				bias-disable;
226			};
227		};
228
229		pwm_ao_a_8_pins: pwm_ao_a_8 {
230			mux {
231				groups = "pwm_ao_a_8";
232				function = "pwm_ao_a";
233				bias-disable;
234			};
235		};
236
237		pwm_ao_b_pins: pwm_ao_b {
238			mux {
239				groups = "pwm_ao_b";
240				function = "pwm_ao_b";
241				bias-disable;
242			};
243		};
244
245		pwm_ao_b_6_pins: pwm_ao_b_6 {
246			mux {
247				groups = "pwm_ao_b_6";
248				function = "pwm_ao_b";
249				bias-disable;
250			};
251		};
252
253		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
254			mux {
255				groups = "i2s_out_ch23_ao";
256				function = "i2s_out_ao";
257				bias-disable;
258			};
259		};
260
261		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
262			mux {
263				groups = "i2s_out_ch45_ao";
264				function = "i2s_out_ao";
265				bias-disable;
266			};
267		};
268
269		spdif_out_ao_6_pins: spdif_out_ao_6 {
270			mux {
271				groups = "spdif_out_ao_6";
272				function = "spdif_out_ao";
273				bias-disable;
274			};
275		};
276
277		spdif_out_ao_9_pins: spdif_out_ao_9 {
278			mux {
279				groups = "spdif_out_ao_9";
280				function = "spdif_out_ao";
281				bias-disable;
282			};
283		};
284
285		ao_cec_pins: ao_cec {
286			mux {
287				groups = "ao_cec";
288				function = "cec_ao";
289				bias-disable;
290			};
291		};
292
293		ee_cec_pins: ee_cec {
294			mux {
295				groups = "ee_cec";
296				function = "cec_ao";
297				bias-disable;
298			};
299		};
300	};
301};
302
303&cec_AO {
304	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
305	clock-names = "core";
306};
307
308&clkc_AO {
309	compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
310	clocks = <&xtal>, <&clkc CLKID_CLK81>;
311	clock-names = "xtal", "mpeg-clk";
312};
313
314&gpio_intc {
315	compatible = "amlogic,meson-gxl-gpio-intc",
316		     "amlogic,meson-gpio-intc";
317	status = "okay";
318};
319
320&hdmi_tx {
321	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
322	resets = <&reset RESET_HDMITX_CAPB3>,
323		 <&reset RESET_HDMI_SYSTEM_RESET>,
324		 <&reset RESET_HDMI_TX>;
325	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
326	clocks = <&clkc CLKID_HDMI>,
327		 <&clkc CLKID_HDMI_PCLK>,
328		 <&clkc CLKID_GCLK_VENCI_INT0>;
329	clock-names = "isfr", "iahb", "venci";
330	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
331
332	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
333			  <&clkc CLKID_HDMI>;
334	assigned-clock-parents = <&xtal>, <0>;
335	assigned-clock-rates = <0>, <24000000>;
336};
337
338&sysctrl {
339	clkc: clock-controller {
340		compatible = "amlogic,gxl-clkc";
341		#clock-cells = <1>;
342		clocks = <&xtal>;
343		clock-names = "xtal";
344	};
345};
346
347&hwrng {
348	clocks = <&clkc CLKID_RNG0>;
349	clock-names = "core";
350};
351
352&i2c_A {
353	clocks = <&clkc CLKID_I2C>;
354};
355
356&i2c_AO {
357	clocks = <&clkc CLKID_AO_I2C>;
358};
359
360&i2c_B {
361	clocks = <&clkc CLKID_I2C>;
362};
363
364&i2c_C {
365	clocks = <&clkc CLKID_I2C>;
366};
367
368&periphs {
369	pinctrl_periphs: pinctrl@4b0 {
370		compatible = "amlogic,meson-gxl-periphs-pinctrl";
371		#address-cells = <2>;
372		#size-cells = <2>;
373		ranges;
374
375		gpio: bank@4b0 {
376			reg = <0x0 0x004b0 0x0 0x28>,
377			      <0x0 0x004e8 0x0 0x14>,
378			      <0x0 0x00520 0x0 0x14>,
379			      <0x0 0x00430 0x0 0x40>;
380			reg-names = "mux", "pull", "pull-enable", "gpio";
381			gpio-controller;
382			#gpio-cells = <2>;
383			gpio-ranges = <&pinctrl_periphs 0 0 100>;
384		};
385
386		emmc_pins: emmc {
387			mux-0 {
388				groups = "emmc_nand_d07",
389				       "emmc_cmd";
390				function = "emmc";
391				bias-pull-up;
392			};
393
394			mux-1 {
395				groups = "emmc_clk";
396				function = "emmc";
397				bias-disable;
398			};
399		};
400
401		emmc_ds_pins: emmc-ds {
402			mux {
403				groups = "emmc_ds";
404				function = "emmc";
405				bias-pull-down;
406			};
407		};
408
409		emmc_clk_gate_pins: emmc_clk_gate {
410			mux {
411				groups = "BOOT_8";
412				function = "gpio_periphs";
413				bias-pull-down;
414			};
415		};
416
417		nor_pins: nor {
418			mux {
419				groups = "nor_d",
420				       "nor_q",
421				       "nor_c",
422				       "nor_cs";
423				function = "nor";
424				bias-disable;
425			};
426		};
427
428		spi_pins: spi-pins {
429			mux {
430				groups = "spi_miso",
431					"spi_mosi",
432					"spi_sclk";
433				function = "spi";
434				bias-disable;
435			};
436		};
437
438		spi_idle_high_pins: spi-idle-high-pins {
439			mux {
440				groups = "spi_sclk";
441				bias-pull-up;
442			};
443		};
444
445		spi_idle_low_pins: spi-idle-low-pins {
446			mux {
447				groups = "spi_sclk";
448				bias-pull-down;
449			};
450		};
451
452		spi_ss0_pins: spi-ss0 {
453			mux {
454				groups = "spi_ss0";
455				function = "spi";
456				bias-disable;
457			};
458		};
459
460		sdcard_pins: sdcard {
461			mux-0 {
462				groups = "sdcard_d0",
463				       "sdcard_d1",
464				       "sdcard_d2",
465				       "sdcard_d3",
466				       "sdcard_cmd";
467				function = "sdcard";
468				bias-pull-up;
469			};
470
471			mux-1 {
472				groups = "sdcard_clk";
473				function = "sdcard";
474				bias-disable;
475			};
476		};
477
478		sdcard_clk_gate_pins: sdcard_clk_gate {
479			mux {
480				groups = "CARD_2";
481				function = "gpio_periphs";
482				bias-pull-down;
483			};
484		};
485
486		sdio_pins: sdio {
487			mux-0 {
488				groups = "sdio_d0",
489				       "sdio_d1",
490				       "sdio_d2",
491				       "sdio_d3",
492				       "sdio_cmd";
493				function = "sdio";
494				bias-pull-up;
495			};
496
497			mux-1 {
498				groups = "sdio_clk";
499				function = "sdio";
500				bias-disable;
501			};
502		};
503
504		sdio_clk_gate_pins: sdio_clk_gate {
505			mux {
506				groups = "GPIOX_4";
507				function = "gpio_periphs";
508				bias-pull-down;
509			};
510		};
511
512		sdio_irq_pins: sdio_irq {
513			mux {
514				groups = "sdio_irq";
515				function = "sdio";
516				bias-disable;
517			};
518		};
519
520		uart_a_pins: uart_a {
521			mux {
522				groups = "uart_tx_a",
523				       "uart_rx_a";
524				function = "uart_a";
525				bias-disable;
526			};
527		};
528
529		uart_a_cts_rts_pins: uart_a_cts_rts {
530			mux {
531				groups = "uart_cts_a",
532				       "uart_rts_a";
533				function = "uart_a";
534				bias-disable;
535			};
536		};
537
538		uart_b_pins: uart_b {
539			mux {
540				groups = "uart_tx_b",
541				       "uart_rx_b";
542				function = "uart_b";
543				bias-disable;
544			};
545		};
546
547		uart_b_cts_rts_pins: uart_b_cts_rts {
548			mux {
549				groups = "uart_cts_b",
550				       "uart_rts_b";
551				function = "uart_b";
552				bias-disable;
553			};
554		};
555
556		uart_c_pins: uart_c {
557			mux {
558				groups = "uart_tx_c",
559				       "uart_rx_c";
560				function = "uart_c";
561				bias-disable;
562			};
563		};
564
565		uart_c_cts_rts_pins: uart_c_cts_rts {
566			mux {
567				groups = "uart_cts_c",
568				       "uart_rts_c";
569				function = "uart_c";
570				bias-disable;
571			};
572		};
573
574		i2c_a_pins: i2c_a {
575			mux {
576				groups = "i2c_sck_a",
577				     "i2c_sda_a";
578				function = "i2c_a";
579				bias-disable;
580			};
581		};
582
583		i2c_b_pins: i2c_b {
584			mux {
585				groups = "i2c_sck_b",
586				      "i2c_sda_b";
587				function = "i2c_b";
588				bias-disable;
589			};
590		};
591
592		i2c_c_pins: i2c_c {
593			mux {
594				groups = "i2c_sck_c",
595				      "i2c_sda_c";
596				function = "i2c_c";
597				bias-disable;
598			};
599		};
600
601		i2c_c_dv18_pins: i2c_c_dv18 {
602			mux {
603				groups = "i2c_sck_c_dv19",
604				      "i2c_sda_c_dv18";
605				function = "i2c_c";
606				bias-disable;
607			};
608		};
609
610		eth_pins: eth_c {
611			mux {
612				groups = "eth_mdio",
613				       "eth_mdc",
614				       "eth_clk_rx_clk",
615				       "eth_rx_dv",
616				       "eth_rxd0",
617				       "eth_rxd1",
618				       "eth_rxd2",
619				       "eth_rxd3",
620				       "eth_rgmii_tx_clk",
621				       "eth_tx_en",
622				       "eth_txd0",
623				       "eth_txd1",
624				       "eth_txd2",
625				       "eth_txd3";
626				function = "eth";
627				bias-disable;
628			};
629		};
630
631		eth_link_led_pins: eth_link_led {
632			mux {
633				groups = "eth_link_led";
634				function = "eth_led";
635				bias-disable;
636			};
637		};
638
639		eth_act_led_pins: eth_act_led {
640			mux {
641				groups = "eth_act_led";
642				function = "eth_led";
643			};
644		};
645
646		pwm_a_pins: pwm_a {
647			mux {
648				groups = "pwm_a";
649				function = "pwm_a";
650				bias-disable;
651			};
652		};
653
654		pwm_b_pins: pwm_b {
655			mux {
656				groups = "pwm_b";
657				function = "pwm_b";
658				bias-disable;
659			};
660		};
661
662		pwm_c_pins: pwm_c {
663			mux {
664				groups = "pwm_c";
665				function = "pwm_c";
666				bias-disable;
667			};
668		};
669
670		pwm_d_pins: pwm_d {
671			mux {
672				groups = "pwm_d";
673				function = "pwm_d";
674				bias-disable;
675			};
676		};
677
678		pwm_e_pins: pwm_e {
679			mux {
680				groups = "pwm_e";
681				function = "pwm_e";
682				bias-disable;
683			};
684		};
685
686		pwm_f_clk_pins: pwm_f_clk {
687			mux {
688				groups = "pwm_f_clk";
689				function = "pwm_f";
690				bias-disable;
691			};
692		};
693
694		pwm_f_x_pins: pwm_f_x {
695			mux {
696				groups = "pwm_f_x";
697				function = "pwm_f";
698				bias-disable;
699			};
700		};
701
702		hdmi_hpd_pins: hdmi_hpd {
703			mux {
704				groups = "hdmi_hpd";
705				function = "hdmi_hpd";
706				bias-disable;
707			};
708		};
709
710		hdmi_i2c_pins: hdmi_i2c {
711			mux {
712				groups = "hdmi_sda", "hdmi_scl";
713				function = "hdmi_i2c";
714				bias-disable;
715			};
716		};
717
718		i2s_am_clk_pins: i2s_am_clk {
719			mux {
720				groups = "i2s_am_clk";
721				function = "i2s_out";
722				bias-disable;
723			};
724		};
725
726		i2s_out_ao_clk_pins: i2s_out_ao_clk {
727			mux {
728				groups = "i2s_out_ao_clk";
729				function = "i2s_out";
730				bias-disable;
731			};
732		};
733
734		i2s_out_lr_clk_pins: i2s_out_lr_clk {
735			mux {
736				groups = "i2s_out_lr_clk";
737				function = "i2s_out";
738				bias-disable;
739			};
740		};
741
742		i2s_out_ch01_pins: i2s_out_ch01 {
743			mux {
744				groups = "i2s_out_ch01";
745				function = "i2s_out";
746				bias-disable;
747			};
748		};
749		i2sout_ch23_z_pins: i2sout_ch23_z {
750			mux {
751				groups = "i2sout_ch23_z";
752				function = "i2s_out";
753				bias-disable;
754			};
755		};
756
757		i2sout_ch45_z_pins: i2sout_ch45_z {
758			mux {
759				groups = "i2sout_ch45_z";
760				function = "i2s_out";
761				bias-disable;
762			};
763		};
764
765		i2sout_ch67_z_pins: i2sout_ch67_z {
766			mux {
767				groups = "i2sout_ch67_z";
768				function = "i2s_out";
769				bias-disable;
770			};
771		};
772
773		spdif_out_h_pins: spdif_out_ao_h {
774			mux {
775				groups = "spdif_out_h";
776				function = "spdif_out";
777				bias-disable;
778			};
779		};
780	};
781
782	eth_phy_mux: mdio@558 {
783		reg = <0x0 0x558 0x0 0xc>;
784		compatible = "amlogic,gxl-mdio-mux";
785		#address-cells = <1>;
786		#size-cells = <0>;
787		clocks = <&clkc CLKID_FCLK_DIV4>;
788		clock-names = "ref";
789		mdio-parent-bus = <&mdio0>;
790
791		external_mdio: mdio@0 {
792			reg = <0x0>;
793			#address-cells = <1>;
794			#size-cells = <0>;
795		};
796
797		internal_mdio: mdio@1 {
798			reg = <0x1>;
799			#address-cells = <1>;
800			#size-cells = <0>;
801
802			internal_phy: ethernet-phy@8 {
803				compatible = "ethernet-phy-id0181.4400";
804				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
805				reg = <8>;
806				max-speed = <100>;
807			};
808		};
809	};
810};
811
812&pwrc {
813	resets = <&reset RESET_VIU>,
814		 <&reset RESET_VENC>,
815		 <&reset RESET_VCBUS>,
816		 <&reset RESET_BT656>,
817		 <&reset RESET_DVIN_RESET>,
818		 <&reset RESET_RDMA>,
819		 <&reset RESET_VENCI>,
820		 <&reset RESET_VENCP>,
821		 <&reset RESET_VDAC>,
822		 <&reset RESET_VDI6>,
823		 <&reset RESET_VENCL>,
824		 <&reset RESET_VID_LOCK>;
825	reset-names = "viu", "venc", "vcbus", "bt656",
826		      "dvin", "rdma", "venci", "vencp",
827		      "vdac", "vdi6", "vencl", "vid_lock";
828	clocks = <&clkc CLKID_VPU>,
829	         <&clkc CLKID_VAPB>;
830	clock-names = "vpu", "vapb";
831	/*
832	 * VPU clocking is provided by two identical clock paths
833	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
834	 * free mux to safely change frequency while running.
835	 * Same for VAPB but with a final gate after the glitch free mux.
836	 */
837	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
838			  <&clkc CLKID_VPU_0>,
839			  <&clkc CLKID_VPU>, /* Glitch free mux */
840			  <&clkc CLKID_VAPB_0_SEL>,
841			  <&clkc CLKID_VAPB_0>,
842			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
843	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
844				 <0>, /* Do Nothing */
845				 <&clkc CLKID_VPU_0>,
846				 <&clkc CLKID_FCLK_DIV4>,
847				 <0>, /* Do Nothing */
848				 <&clkc CLKID_VAPB_0>;
849	assigned-clock-rates = <0>, /* Do Nothing */
850			       <666666666>,
851			       <0>, /* Do Nothing */
852			       <0>, /* Do Nothing */
853			       <250000000>,
854			       <0>; /* Do Nothing */
855};
856
857&saradc {
858	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
859	clocks = <&xtal>,
860		 <&clkc CLKID_SAR_ADC>,
861		 <&clkc CLKID_SAR_ADC_CLK>,
862		 <&clkc CLKID_SAR_ADC_SEL>;
863	clock-names = "clkin", "core", "adc_clk", "adc_sel";
864};
865
866&sd_emmc_a {
867	clocks = <&clkc CLKID_SD_EMMC_A>,
868		 <&clkc CLKID_SD_EMMC_A_CLK0>,
869		 <&clkc CLKID_FCLK_DIV2>;
870	clock-names = "core", "clkin0", "clkin1";
871	resets = <&reset RESET_SD_EMMC_A>;
872};
873
874&sd_emmc_b {
875	clocks = <&clkc CLKID_SD_EMMC_B>,
876		 <&clkc CLKID_SD_EMMC_B_CLK0>,
877		 <&clkc CLKID_FCLK_DIV2>;
878	clock-names = "core", "clkin0", "clkin1";
879	resets = <&reset RESET_SD_EMMC_B>;
880};
881
882&sd_emmc_c {
883	clocks = <&clkc CLKID_SD_EMMC_C>,
884		 <&clkc CLKID_SD_EMMC_C_CLK0>,
885		 <&clkc CLKID_FCLK_DIV2>;
886	clock-names = "core", "clkin0", "clkin1";
887	resets = <&reset RESET_SD_EMMC_C>;
888};
889
890&simplefb_hdmi {
891	clocks = <&clkc CLKID_HDMI_PCLK>,
892		 <&clkc CLKID_CLK81>,
893		 <&clkc CLKID_GCLK_VENCI_INT0>;
894};
895
896&spicc {
897	clocks = <&clkc CLKID_SPICC>;
898	clock-names = "core";
899	resets = <&reset RESET_PERIPHS_SPICC>;
900	num-cs = <1>;
901};
902
903&spifc {
904	clocks = <&clkc CLKID_SPI>;
905};
906
907&uart_A {
908	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
909	clock-names = "xtal", "pclk", "baud";
910};
911
912&uart_AO {
913	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
914	clock-names = "xtal", "pclk", "baud";
915};
916
917&uart_AO_B {
918	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
919	clock-names = "xtal", "pclk", "baud";
920};
921
922&uart_B {
923	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
924	clock-names = "xtal", "pclk", "baud";
925};
926
927&uart_C {
928	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
929	clock-names = "xtal", "pclk", "baud";
930};
931
932&vpu {
933	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
934	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
935};
936
937&vdec {
938	compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
939	clocks = <&clkc CLKID_DOS_PARSER>,
940		 <&clkc CLKID_DOS>,
941		 <&clkc CLKID_VDEC_1>,
942		 <&clkc CLKID_VDEC_HEVC>;
943	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
944	resets = <&reset RESET_PARSER>;
945	reset-names = "esparser";
946};
947