1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2016 Endless Computers, Inc. 4 * Author: Carlo Caione <carlo@endlessm.com> 5 */ 6 7/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either 8 * the pin-compatible S912 (GXM) or S905D (GXL) SoCs. 9 */ 10 11/ { 12 aliases { 13 serial0 = &uart_AO; 14 ethernet0 = ðmac; 15 }; 16 17 chosen { 18 stdout-path = "serial0:115200n8"; 19 }; 20 21 memory@0 { 22 device_type = "memory"; 23 reg = <0x0 0x0 0x0 0x80000000>; 24 }; 25 26 hdmi_5v: regulator-hdmi-5v { 27 compatible = "regulator-fixed"; 28 29 regulator-name = "HDMI_5V"; 30 regulator-min-microvolt = <5000000>; 31 regulator-max-microvolt = <5000000>; 32 33 gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; 34 enable-active-high; 35 regulator-always-on; 36 }; 37 38 vddio_ao18: regulator-vddio_ao18 { 39 compatible = "regulator-fixed"; 40 regulator-name = "VDDIO_AO18"; 41 regulator-min-microvolt = <1800000>; 42 regulator-max-microvolt = <1800000>; 43 }; 44 45 vddio_boot: regulator-vddio_boot { 46 compatible = "regulator-fixed"; 47 regulator-name = "VDDIO_BOOT"; 48 regulator-min-microvolt = <1800000>; 49 regulator-max-microvolt = <1800000>; 50 }; 51 52 vddao_3v3: regulator-vddao_3v3 { 53 compatible = "regulator-fixed"; 54 regulator-name = "VDDAO_3V3"; 55 regulator-min-microvolt = <3300000>; 56 regulator-max-microvolt = <3300000>; 57 }; 58 59 vcc_3v3: regulator-vcc_3v3 { 60 compatible = "regulator-fixed"; 61 regulator-name = "VCC_3V3"; 62 regulator-min-microvolt = <3300000>; 63 regulator-max-microvolt = <3300000>; 64 }; 65 66 emmc_pwrseq: emmc-pwrseq { 67 compatible = "mmc-pwrseq-emmc"; 68 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; 69 }; 70 71 wifi32k: wifi32k { 72 compatible = "pwm-clock"; 73 #clock-cells = <0>; 74 clock-frequency = <32768>; 75 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ 76 }; 77 78 sdio_pwrseq: sdio-pwrseq { 79 compatible = "mmc-pwrseq-simple"; 80 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; 81 clocks = <&wifi32k>; 82 clock-names = "ext_clock"; 83 }; 84 85 cvbs-connector { 86 compatible = "composite-video-connector"; 87 88 port { 89 cvbs_connector_in: endpoint { 90 remote-endpoint = <&cvbs_vdac_out>; 91 }; 92 }; 93 }; 94 95 hdmi-connector { 96 compatible = "hdmi-connector"; 97 type = "a"; 98 99 port { 100 hdmi_connector_in: endpoint { 101 remote-endpoint = <&hdmi_tx_tmds_out>; 102 }; 103 }; 104 }; 105}; 106 107&cec_AO { 108 status = "okay"; 109 pinctrl-0 = <&ao_cec_pins>; 110 pinctrl-names = "default"; 111 hdmi-phandle = <&hdmi_tx>; 112}; 113 114&cvbs_vdac_port { 115 cvbs_vdac_out: endpoint { 116 remote-endpoint = <&cvbs_connector_in>; 117 }; 118}; 119 120ðmac { 121 status = "okay"; 122}; 123 124&hdmi_tx { 125 status = "okay"; 126 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; 127 pinctrl-names = "default"; 128}; 129 130&hdmi_tx_tmds_port { 131 hdmi_tx_tmds_out: endpoint { 132 remote-endpoint = <&hdmi_connector_in>; 133 }; 134}; 135 136&ir { 137 status = "okay"; 138 pinctrl-0 = <&remote_input_ao_pins>; 139 pinctrl-names = "default"; 140}; 141 142&pwm_ef { 143 status = "okay"; 144 pinctrl-0 = <&pwm_e_pins>; 145 pinctrl-names = "default"; 146 clocks = <&clkc CLKID_FCLK_DIV4>; 147 clock-names = "clkin0"; 148}; 149 150&saradc { 151 status = "okay"; 152 vref-supply = <&vddio_ao18>; 153}; 154 155/* Wireless SDIO Module */ 156&sd_emmc_a { 157 status = "okay"; 158 pinctrl-0 = <&sdio_pins>; 159 pinctrl-1 = <&sdio_clk_gate_pins>; 160 pinctrl-names = "default", "clk-gate"; 161 #address-cells = <1>; 162 #size-cells = <0>; 163 164 bus-width = <4>; 165 cap-sd-highspeed; 166 max-frequency = <100000000>; 167 168 non-removable; 169 disable-wp; 170 171 mmc-pwrseq = <&sdio_pwrseq>; 172 173 vmmc-supply = <&vddao_3v3>; 174 vqmmc-supply = <&vddio_boot>; 175}; 176 177/* SD card */ 178&sd_emmc_b { 179 status = "okay"; 180 pinctrl-0 = <&sdcard_pins>; 181 pinctrl-1 = <&sdcard_clk_gate_pins>; 182 pinctrl-names = "default", "clk-gate"; 183 184 bus-width = <4>; 185 cap-sd-highspeed; 186 max-frequency = <100000000>; 187 disable-wp; 188 189 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; 190 cd-inverted; 191 192 vmmc-supply = <&vddao_3v3>; 193 vqmmc-supply = <&vddio_boot>; 194}; 195 196/* eMMC */ 197&sd_emmc_c { 198 status = "okay"; 199 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; 200 pinctrl-1 = <&emmc_clk_gate_pins>; 201 pinctrl-names = "default", "clk-gate"; 202 203 bus-width = <8>; 204 cap-mmc-highspeed; 205 max-frequency = <200000000>; 206 non-removable; 207 disable-wp; 208 mmc-ddr-1_8v; 209 mmc-hs200-1_8v; 210 211 mmc-pwrseq = <&emmc_pwrseq>; 212 vmmc-supply = <&vcc_3v3>; 213 vqmmc-supply = <&vddio_boot>; 214}; 215 216/* This UART is brought out to the DB9 connector */ 217&uart_AO { 218 status = "okay"; 219 pinctrl-0 = <&uart_ao_a_pins>; 220 pinctrl-names = "default"; 221}; 222 223&usb0 { 224 status = "okay"; 225}; 226