1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2018 BayLibre SAS. All rights reserved. 4 */ 5 6/dts-v1/; 7 8#include "meson-g12a.dtsi" 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/gpio/meson-g12a-gpio.h> 11#include <dt-bindings/sound/meson-g12a-tohdmitx.h> 12 13/ { 14 compatible = "amediatech,x96-max", "amlogic,g12a"; 15 model = "Shenzhen Amediatech Technology Co., Ltd X96 Max"; 16 17 aliases { 18 serial0 = &uart_AO; 19 ethernet0 = ðmac; 20 }; 21 22 spdif_dit: audio-codec-1 { 23 #sound-dai-cells = <0>; 24 compatible = "linux,spdif-dit"; 25 sound-name-prefix = "DIT"; 26 }; 27 28 chosen { 29 stdout-path = "serial0:115200n8"; 30 }; 31 memory@0 { 32 device_type = "memory"; 33 reg = <0x0 0x0 0x0 0x40000000>; 34 }; 35 36 cvbs-connector { 37 compatible = "composite-video-connector"; 38 39 port { 40 cvbs_connector_in: endpoint { 41 remote-endpoint = <&cvbs_vdac_out>; 42 }; 43 }; 44 }; 45 46 hdmi-connector { 47 compatible = "hdmi-connector"; 48 type = "a"; 49 50 port { 51 hdmi_connector_in: endpoint { 52 remote-endpoint = <&hdmi_tx_tmds_out>; 53 }; 54 }; 55 }; 56 57 emmc_pwrseq: emmc-pwrseq { 58 compatible = "mmc-pwrseq-emmc"; 59 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; 60 }; 61 62 sdio_pwrseq: sdio-pwrseq { 63 compatible = "mmc-pwrseq-simple"; 64 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; 65 clocks = <&wifi32k>; 66 clock-names = "ext_clock"; 67 }; 68 69 flash_1v8: regulator-flash-1v8 { 70 compatible = "regulator-fixed"; 71 regulator-name = "FLASH_1V8"; 72 regulator-min-microvolt = <1800000>; 73 regulator-max-microvolt = <1800000>; 74 vin-supply = <&vcc_3v3>; 75 regulator-always-on; 76 }; 77 78 dc_in: regulator-dc-in { 79 compatible = "regulator-fixed"; 80 regulator-name = "DC_IN"; 81 regulator-min-microvolt = <5000000>; 82 regulator-max-microvolt = <5000000>; 83 regulator-always-on; 84 }; 85 86 vcc_1v8: regulator-vcc-1v8 { 87 compatible = "regulator-fixed"; 88 regulator-name = "VCC_1V8"; 89 regulator-min-microvolt = <1800000>; 90 regulator-max-microvolt = <1800000>; 91 vin-supply = <&vcc_3v3>; 92 regulator-always-on; 93 }; 94 95 vcc_3v3: regulator-vcc-3v3 { 96 compatible = "regulator-fixed"; 97 regulator-name = "VCC_3V3"; 98 regulator-min-microvolt = <3300000>; 99 regulator-max-microvolt = <3300000>; 100 vin-supply = <&vddao_3v3>; 101 regulator-always-on; 102 /* FIXME: actually controlled by VDDCPU_B_EN */ 103 }; 104 105 vcc_5v: regulator-vcc-5v { 106 compatible = "regulator-fixed"; 107 regulator-name = "VCC_5V"; 108 regulator-min-microvolt = <5000000>; 109 regulator-max-microvolt = <5000000>; 110 vin-supply = <&dc_in>; 111 112 gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; 113 }; 114 115 vddao_1v8: regulator-vddao-1v8 { 116 compatible = "regulator-fixed"; 117 regulator-name = "VDDAO_1V8"; 118 regulator-min-microvolt = <1800000>; 119 regulator-max-microvolt = <1800000>; 120 vin-supply = <&vddao_3v3>; 121 regulator-always-on; 122 }; 123 124 vddao_3v3: regulator-vddao-3v3 { 125 compatible = "regulator-fixed"; 126 regulator-name = "VDDAO_3V3"; 127 regulator-min-microvolt = <3300000>; 128 regulator-max-microvolt = <3300000>; 129 vin-supply = <&dc_in>; 130 regulator-always-on; 131 }; 132 133 vddcpu: regulator-vddcpu { 134 compatible = "pwm-regulator"; 135 136 regulator-name = "VDDCPU"; 137 regulator-min-microvolt = <721000>; 138 regulator-max-microvolt = <1022000>; 139 140 pwm-supply = <&dc_in>; 141 142 pwms = <&pwm_AO_cd 1 1250 0>; 143 pwm-dutycycle-range = <100 0>; 144 145 regulator-boot-on; 146 regulator-always-on; 147 }; 148 149 sound { 150 compatible = "amlogic,axg-sound-card"; 151 model = "X96-MAX"; 152 audio-aux-devs = <&tdmout_b>; 153 audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", 154 "TDMOUT_B IN 1", "FRDDR_B OUT 1", 155 "TDMOUT_B IN 2", "FRDDR_C OUT 1", 156 "TDM_B Playback", "TDMOUT_B OUT", 157 "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", 158 "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", 159 "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; 160 161 assigned-clocks = <&clkc CLKID_MPLL2>, 162 <&clkc CLKID_MPLL0>, 163 <&clkc CLKID_MPLL1>; 164 assigned-clock-parents = <0>, <0>, <0>; 165 assigned-clock-rates = <294912000>, 166 <270950400>, 167 <393216000>; 168 169 dai-link-0 { 170 sound-dai = <&frddr_a>; 171 }; 172 173 dai-link-1 { 174 sound-dai = <&frddr_b>; 175 }; 176 177 dai-link-2 { 178 sound-dai = <&frddr_c>; 179 }; 180 181 /* 8ch hdmi interface */ 182 dai-link-3 { 183 sound-dai = <&tdmif_b>; 184 dai-format = "i2s"; 185 dai-tdm-slot-tx-mask-0 = <1 1>; 186 dai-tdm-slot-tx-mask-1 = <1 1>; 187 dai-tdm-slot-tx-mask-2 = <1 1>; 188 dai-tdm-slot-tx-mask-3 = <1 1>; 189 mclk-fs = <256>; 190 191 codec { 192 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; 193 }; 194 }; 195 196 /* spdif hdmi or toslink interface */ 197 dai-link-4 { 198 sound-dai = <&spdifout_a>; 199 200 codec-0 { 201 sound-dai = <&spdif_dit>; 202 }; 203 204 codec-1 { 205 sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; 206 }; 207 }; 208 209 /* spdif hdmi interface */ 210 dai-link-5 { 211 sound-dai = <&spdifout_b>; 212 213 codec { 214 sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; 215 }; 216 }; 217 218 /* hdmi glue */ 219 dai-link-6 { 220 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; 221 222 codec { 223 sound-dai = <&hdmi_tx>; 224 }; 225 }; 226 }; 227 228 wifi32k: wifi32k { 229 compatible = "pwm-clock"; 230 #clock-cells = <0>; 231 clock-frequency = <32768>; 232 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ 233 }; 234}; 235 236&arb { 237 status = "okay"; 238}; 239 240&cec_AO { 241 pinctrl-0 = <&cec_ao_a_h_pins>; 242 pinctrl-names = "default"; 243 status = "disabled"; 244 hdmi-phandle = <&hdmi_tx>; 245}; 246 247&cecb_AO { 248 pinctrl-0 = <&cec_ao_b_h_pins>; 249 pinctrl-names = "default"; 250 status = "okay"; 251 hdmi-phandle = <&hdmi_tx>; 252}; 253 254&clkc_audio { 255 status = "okay"; 256}; 257 258&cpu0 { 259 cpu-supply = <&vddcpu>; 260 operating-points-v2 = <&cpu_opp_table>; 261 clocks = <&clkc CLKID_CPU_CLK>; 262 clock-latency = <50000>; 263}; 264 265&cpu1 { 266 cpu-supply = <&vddcpu>; 267 operating-points-v2 = <&cpu_opp_table>; 268 clocks = <&clkc CLKID_CPU_CLK>; 269 clock-latency = <50000>; 270}; 271 272&cpu2 { 273 cpu-supply = <&vddcpu>; 274 operating-points-v2 = <&cpu_opp_table>; 275 clocks = <&clkc CLKID_CPU_CLK>; 276 clock-latency = <50000>; 277}; 278 279&cpu3 { 280 cpu-supply = <&vddcpu>; 281 operating-points-v2 = <&cpu_opp_table>; 282 clocks = <&clkc CLKID_CPU_CLK>; 283 clock-latency = <50000>; 284}; 285 286&cvbs_vdac_port { 287 cvbs_vdac_out: endpoint { 288 remote-endpoint = <&cvbs_connector_in>; 289 }; 290}; 291 292&frddr_a { 293 status = "okay"; 294}; 295 296&frddr_b { 297 status = "okay"; 298}; 299 300&frddr_c { 301 status = "okay"; 302}; 303 304&hdmi_tx { 305 status = "okay"; 306 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; 307 pinctrl-names = "default"; 308 hdmi-supply = <&vcc_5v>; 309}; 310 311&hdmi_tx_tmds_port { 312 hdmi_tx_tmds_out: endpoint { 313 remote-endpoint = <&hdmi_connector_in>; 314 }; 315}; 316 317&ir { 318 status = "okay"; 319 pinctrl-0 = <&remote_input_ao_pins>; 320 pinctrl-names = "default"; 321 linux,rc-map-name = "rc-x96max"; 322}; 323 324&pwm_AO_cd { 325 pinctrl-0 = <&pwm_ao_d_e_pins>; 326 pinctrl-names = "default"; 327 clocks = <&xtal>; 328 clock-names = "clkin1"; 329 status = "okay"; 330}; 331 332&ext_mdio { 333 external_phy: ethernet-phy@0 { 334 /* Realtek RTL8211F (0x001cc916) */ 335 reg = <0>; 336 max-speed = <1000>; 337 eee-broken-1000t; 338 339 reset-assert-us = <10000>; 340 reset-deassert-us = <80000>; 341 reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; 342 343 interrupt-parent = <&gpio_intc>; 344 /* MAC_INTR on GPIOZ_14 */ 345 interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; 346 }; 347}; 348 349ðmac { 350 pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; 351 pinctrl-names = "default"; 352 status = "okay"; 353 phy-mode = "rgmii"; 354 phy-handle = <&external_phy>; 355 amlogic,tx-delay-ns = <2>; 356}; 357 358&pwm_ef { 359 status = "okay"; 360 pinctrl-0 = <&pwm_e_pins>; 361 pinctrl-names = "default"; 362 clocks = <&xtal>; 363 clock-names = "clkin0"; 364}; 365 366&uart_A { 367 status = "okay"; 368 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; 369 pinctrl-names = "default"; 370 uart-has-rtscts; 371 372 bluetooth { 373 compatible = "brcm,bcm43438-bt"; 374 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; 375 max-speed = <2000000>; 376 clocks = <&wifi32k>; 377 clock-names = "lpo"; 378 }; 379}; 380 381&uart_AO { 382 status = "okay"; 383 pinctrl-0 = <&uart_ao_a_pins>; 384 pinctrl-names = "default"; 385}; 386 387&usb { 388 status = "okay"; 389 dr_mode = "host"; 390}; 391 392/* SDIO */ 393&sd_emmc_a { 394 status = "okay"; 395 pinctrl-0 = <&sdio_pins>; 396 pinctrl-1 = <&sdio_clk_gate_pins>; 397 pinctrl-names = "default", "clk-gate"; 398 #address-cells = <1>; 399 #size-cells = <0>; 400 401 bus-width = <4>; 402 cap-sd-highspeed; 403 sd-uhs-sdr50; 404 max-frequency = <100000000>; 405 406 non-removable; 407 disable-wp; 408 409 /* WiFi firmware requires power to be kept while in suspend */ 410 keep-power-in-suspend; 411 412 mmc-pwrseq = <&sdio_pwrseq>; 413 414 vmmc-supply = <&vddao_3v3>; 415 vqmmc-supply = <&vddao_1v8>; 416 417 brcmf: wifi@1 { 418 reg = <1>; 419 compatible = "brcm,bcm4329-fmac"; 420 }; 421}; 422 423/* SD card */ 424&sd_emmc_b { 425 status = "okay"; 426 pinctrl-0 = <&sdcard_c_pins>; 427 pinctrl-1 = <&sdcard_clk_gate_c_pins>; 428 pinctrl-names = "default", "clk-gate"; 429 430 bus-width = <4>; 431 cap-sd-highspeed; 432 max-frequency = <100000000>; 433 disable-wp; 434 435 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; 436 vmmc-supply = <&vddao_3v3>; 437 vqmmc-supply = <&vddao_3v3>; 438}; 439 440/* eMMC */ 441&sd_emmc_c { 442 status = "okay"; 443 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; 444 pinctrl-1 = <&emmc_clk_gate_pins>; 445 pinctrl-names = "default", "clk-gate"; 446 447 bus-width = <8>; 448 cap-mmc-highspeed; 449 max-frequency = <100000000>; 450 non-removable; 451 disable-wp; 452 453 mmc-pwrseq = <&emmc_pwrseq>; 454 vmmc-supply = <&vcc_3v3>; 455 vqmmc-supply = <&flash_1v8>; 456}; 457 458&spdifout_a { 459 pinctrl-0 = <&spdif_out_h_pins>; 460 pinctrl-names = "default"; 461 status = "okay"; 462}; 463 464&spdifout_b { 465 status = "okay"; 466}; 467 468&tdmif_b { 469 status = "okay"; 470}; 471 472&tdmout_b { 473 status = "okay"; 474}; 475 476&tohdmitx { 477 status = "okay"; 478}; 479