xref: /linux/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts (revision a0efa2f362a69e47b9d8b48f770ef3a0249a7911)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
4 */
5
6/dts-v1/;
7
8#include "meson-g12a.dtsi"
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/gpio/meson-g12a-gpio.h>
11#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
12#include <dt-bindings/sound/meson-g12a-toacodec.h>
13
14/ {
15	compatible = "amlogic,u200", "amlogic,g12a";
16	model = "Amlogic Meson G12A U200 Development Board";
17
18	aliases {
19		serial0 = &uart_AO;
20		ethernet0 = &ethmac;
21	};
22
23	dioo2133: audio-amplifier-0 {
24		compatible = "simple-audio-amplifier";
25		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
26		VCC-supply = <&vcc_5v>;
27		sound-name-prefix = "10U2";
28	};
29
30	spdif_dir: audio-codec-0 {
31		compatible = "linux,spdif-dir";
32		#sound-dai-cells = <0>;
33		sound-name-prefix = "DIR";
34	};
35
36	spdif_dit: audio-codec-1 {
37		compatible = "linux,spdif-dit";
38		#sound-dai-cells = <0>;
39		sound-name-prefix = "DIT";
40	};
41
42	chosen {
43		stdout-path = "serial0:115200n8";
44	};
45
46	cvbs-connector {
47		compatible = "composite-video-connector";
48
49		port {
50			cvbs_connector_in: endpoint {
51				remote-endpoint = <&cvbs_vdac_out>;
52			};
53		};
54	};
55
56	emmc_pwrseq: emmc-pwrseq {
57		compatible = "mmc-pwrseq-emmc";
58		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
59	};
60
61	hdmi-connector {
62		compatible = "hdmi-connector";
63		type = "a";
64
65		port {
66			hdmi_connector_in: endpoint {
67				remote-endpoint = <&hdmi_tx_tmds_out>;
68			};
69		};
70	};
71
72	memory@0 {
73		device_type = "memory";
74		reg = <0x0 0x0 0x0 0x40000000>;
75	};
76
77	flash_1v8: regulator-flash-1v8 {
78		compatible = "regulator-fixed";
79		regulator-name = "FLASH_1V8";
80		regulator-min-microvolt = <1800000>;
81		regulator-max-microvolt = <1800000>;
82		vin-supply = <&vcc_3v3>;
83		regulator-always-on;
84	};
85
86	main_12v: regulator-main-12v {
87		compatible = "regulator-fixed";
88		regulator-name = "12V";
89		regulator-min-microvolt = <12000000>;
90		regulator-max-microvolt = <12000000>;
91		regulator-always-on;
92	};
93
94	usb_pwr_en: regulator-usb-pwr-en {
95		compatible = "regulator-fixed";
96		regulator-name = "USB_PWR_EN";
97		regulator-min-microvolt = <5000000>;
98		regulator-max-microvolt = <5000000>;
99		vin-supply = <&vcc_5v>;
100
101		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
102		enable-active-high;
103	};
104
105	vcc_1v8: regulator-vcc-1v8 {
106		compatible = "regulator-fixed";
107		regulator-name = "VCC_1V8";
108		regulator-min-microvolt = <1800000>;
109		regulator-max-microvolt = <1800000>;
110		vin-supply = <&vcc_3v3>;
111		regulator-always-on;
112	};
113
114	vcc_3v3: regulator-vcc-3v3 {
115		compatible = "regulator-fixed";
116		regulator-name = "VCC_3V3";
117		regulator-min-microvolt = <3300000>;
118		regulator-max-microvolt = <3300000>;
119		vin-supply = <&vddao_3v3>;
120		regulator-always-on;
121		/* FIXME: actually controlled by VDDCPU_B_EN */
122	};
123
124	vcc_5v: regulator-vcc-5v {
125		compatible = "regulator-fixed";
126		regulator-name = "VCC_5V";
127		regulator-min-microvolt = <5000000>;
128		regulator-max-microvolt = <5000000>;
129		vin-supply = <&main_12v>;
130
131		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
132		enable-active-high;
133	};
134
135	vddao_1v8: regulator-vddao-1v8 {
136		compatible = "regulator-fixed";
137		regulator-name = "VDDAO_1V8";
138		regulator-min-microvolt = <1800000>;
139		regulator-max-microvolt = <1800000>;
140		vin-supply = <&vddao_3v3>;
141		regulator-always-on;
142	};
143
144	vddao_3v3: regulator-vddao-3v3 {
145		compatible = "regulator-fixed";
146		regulator-name = "VDDAO_3V3";
147		regulator-min-microvolt = <3300000>;
148		regulator-max-microvolt = <3300000>;
149		vin-supply = <&main_12v>;
150		regulator-always-on;
151	};
152
153	vddcpu: regulator-vddcpu {
154		/*
155		 * MP8756GD Regulator.
156		 */
157		compatible = "pwm-regulator";
158
159		regulator-name = "VDDCPU";
160		regulator-min-microvolt = <721000>;
161		regulator-max-microvolt = <1022000>;
162
163		pwm-supply = <&main_12v>;
164
165		pwms = <&pwm_AO_cd 1 1250 0>;
166		pwm-dutycycle-range = <100 0>;
167
168		regulator-boot-on;
169		regulator-always-on;
170	};
171
172	sound {
173		compatible = "amlogic,axg-sound-card";
174		model = "U200";
175		audio-widgets = "Line", "Lineout";
176		audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
177				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
178				 <&tdmin_lb>, <&dioo2133>;
179		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
180				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
181				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
182				"TDM_A Playback", "TDMOUT_A OUT",
183				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
184				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
185				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
186				"TDM_B Playback", "TDMOUT_B OUT",
187				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
188				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
189				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
190				"TDM_C Playback", "TDMOUT_C OUT",
191				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
192				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
193				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3",
194				"SPDIFOUT_B IN 0", "FRDDR_A OUT 4",
195				"SPDIFOUT_B IN 1", "FRDDR_B OUT 4",
196				"SPDIFOUT_B IN 2", "FRDDR_C OUT 4",
197				"TDMIN_A IN 0", "TDM_A Capture",
198				"TDMIN_A IN 1", "TDM_B Capture",
199				"TDMIN_A IN 2", "TDM_C Capture",
200				"TDMIN_A IN 3", "TDM_A Loopback",
201				"TDMIN_A IN 4", "TDM_B Loopback",
202				"TDMIN_A IN 5", "TDM_C Loopback",
203				"TDMIN_B IN 0", "TDM_A Capture",
204				"TDMIN_B IN 1", "TDM_B Capture",
205				"TDMIN_B IN 2", "TDM_C Capture",
206				"TDMIN_B IN 3", "TDM_A Loopback",
207				"TDMIN_B IN 4", "TDM_B Loopback",
208				"TDMIN_B IN 5", "TDM_C Loopback",
209				"TDMIN_C IN 0", "TDM_A Capture",
210				"TDMIN_C IN 1", "TDM_B Capture",
211				"TDMIN_C IN 2", "TDM_C Capture",
212				"TDMIN_C IN 3", "TDM_A Loopback",
213				"TDMIN_C IN 4", "TDM_B Loopback",
214				"TDMIN_C IN 5", "TDM_C Loopback",
215				"TDMIN_LB IN 3", "TDM_A Capture",
216				"TDMIN_LB IN 4", "TDM_B Capture",
217				"TDMIN_LB IN 5", "TDM_C Capture",
218				"TDMIN_LB IN 0", "TDM_A Loopback",
219				"TDMIN_LB IN 1", "TDM_B Loopback",
220				"TDMIN_LB IN 2", "TDM_C Loopback",
221				"TODDR_A IN 0", "TDMIN_A OUT",
222				"TODDR_B IN 0", "TDMIN_A OUT",
223				"TODDR_C IN 0", "TDMIN_A OUT",
224				"TODDR_A IN 1", "TDMIN_B OUT",
225				"TODDR_B IN 1", "TDMIN_B OUT",
226				"TODDR_C IN 1", "TDMIN_B OUT",
227				"TODDR_A IN 2", "TDMIN_C OUT",
228				"TODDR_B IN 2", "TDMIN_C OUT",
229				"TODDR_C IN 2", "TDMIN_C OUT",
230				"TODDR_A IN 3", "SPDIFIN Capture",
231				"TODDR_B IN 3", "SPDIFIN Capture",
232				"TODDR_C IN 3", "SPDIFIN Capture",
233				"TODDR_A IN 6", "TDMIN_LB OUT",
234				"TODDR_B IN 6", "TDMIN_LB OUT",
235				"TODDR_C IN 6", "TDMIN_LB OUT",
236				"10U2 INL", "ACODEC LOLP",
237				"10U2 INR", "ACODEC LORP",
238				"Lineout", "10U2 OUTL",
239				"Lineout", "10U2 OUTR";
240
241		clocks = <&clkc CLKID_MPLL2>,
242			 <&clkc CLKID_MPLL0>,
243			 <&clkc CLKID_MPLL1>;
244
245		assigned-clocks = <&clkc CLKID_MPLL2>,
246				  <&clkc CLKID_MPLL0>,
247				  <&clkc CLKID_MPLL1>;
248		assigned-clock-parents = <0>, <0>, <0>;
249		assigned-clock-rates = <294912000>,
250				       <270950400>,
251				       <393216000>;
252
253		dai-link-0 {
254			sound-dai = <&frddr_a>;
255		};
256
257		dai-link-1 {
258			sound-dai = <&frddr_b>;
259		};
260
261		dai-link-2 {
262			sound-dai = <&frddr_c>;
263		};
264
265		dai-link-3 {
266			sound-dai = <&toddr_a>;
267		};
268
269		dai-link-4 {
270			sound-dai = <&toddr_b>;
271		};
272
273		dai-link-5 {
274			sound-dai = <&toddr_c>;
275		};
276
277		/* Connected to the WIFI/BT chip */
278		dai-link-6 {
279			sound-dai = <&tdmif_a>;
280			dai-format = "dsp_a";
281			dai-tdm-slot-tx-mask-0 = <1 1>;
282			mclk-fs = <256>;
283
284			codec-0 {
285				sound-dai = <&toacodec TOACODEC_IN_A>;
286			};
287
288			codec-1 {
289				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
290			};
291		};
292
293		/* Connected to the onboard AD82584F DAC */
294		dai-link-7 {
295			sound-dai = <&tdmif_b>;
296			dai-format = "i2s";
297			dai-tdm-slot-tx-mask-0 = <1 1>;
298			mclk-fs = <256>;
299
300			codec-0 {
301				sound-dai = <&toacodec TOACODEC_IN_B>;
302			};
303
304			codec-1 {
305				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
306			};
307		};
308
309		/* 8ch HDMI interface */
310		dai-link-8 {
311			sound-dai = <&tdmif_c>;
312			dai-format = "i2s";
313			dai-tdm-slot-tx-mask-0 = <1 1>;
314			dai-tdm-slot-tx-mask-1 = <1 1>;
315			dai-tdm-slot-tx-mask-2 = <1 1>;
316			dai-tdm-slot-tx-mask-3 = <1 1>;
317			mclk-fs = <256>;
318
319			codec-0 {
320				sound-dai = <&toacodec TOACODEC_IN_C>;
321			};
322
323			codec-1 {
324				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
325			};
326		};
327
328		/* spdif hdmi and coax output */
329		dai-link-9 {
330			sound-dai = <&spdifout_a>;
331
332			codec-0 {
333				sound-dai = <&spdif_dit>;
334			};
335
336			codec-1 {
337				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
338			};
339		};
340
341		/* spdif hdmi interface */
342		dai-link-10 {
343			sound-dai = <&spdifout_b>;
344
345			codec {
346				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
347			};
348		};
349
350		/* hdmi glue */
351		dai-link-11 {
352			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
353
354			codec {
355				sound-dai = <&hdmi_tx>;
356			};
357		};
358
359		/* internal codec glue */
360		dai-link-12 {
361			sound-dai = <&toacodec TOACODEC_OUT>;
362
363			codec {
364				sound-dai = <&acodec>;
365			};
366		};
367
368		/* spdif coax input */
369		dai-link-13 {
370			sound-dai = <&spdifin>;
371
372			codec {
373				sound-dai = <&spdif_dir>;
374			};
375		};
376	};
377};
378
379&acodec {
380	AVDD-supply = <&vddao_1v8>;
381	status = "okay";
382};
383
384&arb {
385	status = "okay";
386};
387
388&cec_AO {
389	pinctrl-0 = <&cec_ao_a_h_pins>;
390	pinctrl-names = "default";
391	status = "disabled";
392	hdmi-phandle = <&hdmi_tx>;
393};
394
395&cecb_AO {
396	pinctrl-0 = <&cec_ao_b_h_pins>;
397	pinctrl-names = "default";
398	status = "okay";
399	hdmi-phandle = <&hdmi_tx>;
400};
401
402&clkc_audio {
403	status = "okay";
404};
405
406&cpu0 {
407	cpu-supply = <&vddcpu>;
408	operating-points-v2 = <&cpu_opp_table>;
409	clocks = <&clkc CLKID_CPU_CLK>;
410	clock-latency = <50000>;
411};
412
413&cpu1 {
414	cpu-supply = <&vddcpu>;
415	operating-points-v2 = <&cpu_opp_table>;
416	clocks = <&clkc CLKID_CPU_CLK>;
417	clock-latency = <50000>;
418};
419
420&cpu2 {
421	cpu-supply = <&vddcpu>;
422	operating-points-v2 = <&cpu_opp_table>;
423	clocks = <&clkc CLKID_CPU_CLK>;
424	clock-latency = <50000>;
425};
426
427&cpu3 {
428	cpu-supply = <&vddcpu>;
429	operating-points-v2 = <&cpu_opp_table>;
430	clocks = <&clkc CLKID_CPU_CLK>;
431	clock-latency = <50000>;
432};
433
434&clkc_audio {
435	status = "okay";
436};
437
438&cvbs_vdac_port {
439	cvbs_vdac_out: endpoint {
440		remote-endpoint = <&cvbs_connector_in>;
441	};
442};
443
444&ethmac {
445	status = "okay";
446	phy-handle = <&internal_ephy>;
447	phy-mode = "rmii";
448};
449
450&frddr_a {
451	status = "okay";
452};
453
454&frddr_b {
455	status = "okay";
456};
457
458&frddr_c {
459	status = "okay";
460};
461
462&hdmi_tx {
463	status = "okay";
464	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
465	pinctrl-names = "default";
466	hdmi-supply = <&vcc_5v>;
467};
468
469&hdmi_tx_tmds_port {
470	hdmi_tx_tmds_out: endpoint {
471		remote-endpoint = <&hdmi_connector_in>;
472	};
473};
474
475&ir {
476	status = "okay";
477	pinctrl-0 = <&remote_input_ao_pins>;
478	pinctrl-names = "default";
479};
480
481/* i2c Touch */
482&i2c0 {
483	status = "okay";
484	pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>;
485	pinctrl-names = "default";
486};
487
488/* i2c CM */
489&i2c2 {
490	status = "okay";
491	pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>;
492	pinctrl-names = "default";
493};
494
495/* i2c Audio */
496&i2c3 {
497	status = "okay";
498	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
499	pinctrl-names = "default";
500};
501
502&pwm_AO_cd {
503	pinctrl-0 = <&pwm_ao_d_e_pins>;
504	pinctrl-names = "default";
505	clocks = <&xtal>;
506	clock-names = "clkin1";
507	status = "okay";
508};
509
510/* SD card */
511&sd_emmc_b {
512	status = "okay";
513	pinctrl-0 = <&sdcard_c_pins>;
514	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
515	pinctrl-names = "default", "clk-gate";
516
517	bus-width = <4>;
518	cap-sd-highspeed;
519	max-frequency = <50000000>;
520	disable-wp;
521
522	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
523	vmmc-supply = <&vddao_3v3>;
524	vqmmc-supply = <&vddao_3v3>;
525};
526
527/* eMMC */
528&sd_emmc_c {
529	status = "okay";
530	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
531	pinctrl-1 = <&emmc_clk_gate_pins>;
532	pinctrl-names = "default", "clk-gate";
533
534	bus-width = <8>;
535	cap-mmc-highspeed;
536	mmc-ddr-1_8v;
537	mmc-hs200-1_8v;
538	max-frequency = <200000000>;
539	non-removable;
540	disable-wp;
541
542	mmc-pwrseq = <&emmc_pwrseq>;
543	vmmc-supply = <&vcc_3v3>;
544	vqmmc-supply = <&flash_1v8>;
545};
546
547&spdifin {
548	pinctrl-0 = <&spdif_in_h_pins>;
549	pinctrl-names = "default";
550	status = "okay";
551};
552
553&spdifout_a {
554	pinctrl-0 = <&spdif_ao_out_pins>;
555	pinctrl-names = "default";
556	status = "okay";
557};
558
559&spdifout_b {
560	status = "okay";
561};
562
563&tdmif_a {
564	pinctrl-0 = <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>, <&tdm_a_dout0_pins> ;
565	pinctrl-names = "default";
566	status = "okay";
567};
568
569&tdmif_b {
570	pinctrl-0 = <&mclk0_a_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>,
571		    <&tdm_b_dout0_pins>;
572	pinctrl-names = "default";
573	status = "okay";
574
575	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_MCLK_PAD0>,
576			  <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
577			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
578	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
579				 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
580				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
581	assigned-clock-rates = <0>, <0>, <0>;
582};
583
584&tdmif_c {
585	status = "okay";
586};
587
588&tdmin_a {
589	status = "okay";
590};
591
592&tdmin_b {
593	status = "okay";
594};
595
596&tdmin_c {
597	status = "okay";
598};
599
600&tdmin_lb {
601	status = "okay";
602};
603
604&tdmout_a {
605	status = "okay";
606};
607
608&tdmout_b {
609	status = "okay";
610};
611
612&tdmout_c {
613	status = "okay";
614};
615
616&toacodec {
617	status = "okay";
618};
619
620&toddr_a {
621	status = "okay";
622};
623
624&toddr_b {
625	status = "okay";
626};
627
628&toddr_c {
629	status = "okay";
630};
631
632&tohdmitx {
633	status = "okay";
634};
635
636&uart_AO {
637	status = "okay";
638	pinctrl-0 = <&uart_ao_a_pins>;
639	pinctrl-names = "default";
640};
641
642&usb {
643	status = "okay";
644	vbus-supply = <&usb_pwr_en>;
645};
646
647&usb2_phy0 {
648	phy-supply = <&vcc_5v>;
649};
650
651&usb2_phy1 {
652	phy-supply = <&vcc_5v>;
653};
654