xref: /linux/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts (revision 4b660dbd9ee2059850fd30e0df420ca7a38a1856)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
4 */
5
6/dts-v1/;
7
8#include "meson-g12a.dtsi"
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/gpio/meson-g12a-gpio.h>
11#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
12#include <dt-bindings/sound/meson-g12a-toacodec.h>
13
14/ {
15	compatible = "amlogic,u200", "amlogic,g12a";
16	model = "Amlogic Meson G12A U200 Development Board";
17
18	aliases {
19		serial0 = &uart_AO;
20		ethernet0 = &ethmac;
21	};
22
23	dioo2133: audio-amplifier-0 {
24		compatible = "simple-audio-amplifier";
25		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
26		VCC-supply = <&vcc_5v>;
27		#sound-dai-cells = <0>;
28		sound-name-prefix = "10U2";
29	};
30
31	spdif_dir: audio-codec-0 {
32		compatible = "linux,spdif-dir";
33		#sound-dai-cells = <0>;
34		sound-name-prefix = "DIR";
35	};
36
37	spdif_dit: audio-codec-1 {
38		compatible = "linux,spdif-dit";
39		#sound-dai-cells = <0>;
40		sound-name-prefix = "DIT";
41	};
42
43	chosen {
44		stdout-path = "serial0:115200n8";
45	};
46
47	cvbs-connector {
48		compatible = "composite-video-connector";
49
50		port {
51			cvbs_connector_in: endpoint {
52				remote-endpoint = <&cvbs_vdac_out>;
53			};
54		};
55	};
56
57	emmc_pwrseq: emmc-pwrseq {
58		compatible = "mmc-pwrseq-emmc";
59		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
60	};
61
62	hdmi-connector {
63		compatible = "hdmi-connector";
64		type = "a";
65
66		port {
67			hdmi_connector_in: endpoint {
68				remote-endpoint = <&hdmi_tx_tmds_out>;
69			};
70		};
71	};
72
73	memory@0 {
74		device_type = "memory";
75		reg = <0x0 0x0 0x0 0x40000000>;
76	};
77
78	flash_1v8: regulator-flash-1v8 {
79		compatible = "regulator-fixed";
80		regulator-name = "FLASH_1V8";
81		regulator-min-microvolt = <1800000>;
82		regulator-max-microvolt = <1800000>;
83		vin-supply = <&vcc_3v3>;
84		regulator-always-on;
85	};
86
87	main_12v: regulator-main-12v {
88		compatible = "regulator-fixed";
89		regulator-name = "12V";
90		regulator-min-microvolt = <12000000>;
91		regulator-max-microvolt = <12000000>;
92		regulator-always-on;
93	};
94
95	usb_pwr_en: regulator-usb-pwr-en {
96		compatible = "regulator-fixed";
97		regulator-name = "USB_PWR_EN";
98		regulator-min-microvolt = <5000000>;
99		regulator-max-microvolt = <5000000>;
100		vin-supply = <&vcc_5v>;
101
102		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
103		enable-active-high;
104	};
105
106	vcc_1v8: regulator-vcc-1v8 {
107		compatible = "regulator-fixed";
108		regulator-name = "VCC_1V8";
109		regulator-min-microvolt = <1800000>;
110		regulator-max-microvolt = <1800000>;
111		vin-supply = <&vcc_3v3>;
112		regulator-always-on;
113	};
114
115	vcc_3v3: regulator-vcc-3v3 {
116		compatible = "regulator-fixed";
117		regulator-name = "VCC_3V3";
118		regulator-min-microvolt = <3300000>;
119		regulator-max-microvolt = <3300000>;
120		vin-supply = <&vddao_3v3>;
121		regulator-always-on;
122		/* FIXME: actually controlled by VDDCPU_B_EN */
123	};
124
125	vcc_5v: regulator-vcc-5v {
126		compatible = "regulator-fixed";
127		regulator-name = "VCC_5V";
128		regulator-min-microvolt = <5000000>;
129		regulator-max-microvolt = <5000000>;
130		vin-supply = <&main_12v>;
131
132		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
133		enable-active-high;
134	};
135
136	vddao_1v8: regulator-vddao-1v8 {
137		compatible = "regulator-fixed";
138		regulator-name = "VDDAO_1V8";
139		regulator-min-microvolt = <1800000>;
140		regulator-max-microvolt = <1800000>;
141		vin-supply = <&vddao_3v3>;
142		regulator-always-on;
143	};
144
145	vddao_3v3: regulator-vddao-3v3 {
146		compatible = "regulator-fixed";
147		regulator-name = "VDDAO_3V3";
148		regulator-min-microvolt = <3300000>;
149		regulator-max-microvolt = <3300000>;
150		vin-supply = <&main_12v>;
151		regulator-always-on;
152	};
153
154	vddcpu: regulator-vddcpu {
155		/*
156		 * MP8756GD Regulator.
157		 */
158		compatible = "pwm-regulator";
159
160		regulator-name = "VDDCPU";
161		regulator-min-microvolt = <721000>;
162		regulator-max-microvolt = <1022000>;
163
164		pwm-supply = <&main_12v>;
165
166		pwms = <&pwm_AO_cd 1 1250 0>;
167		pwm-dutycycle-range = <100 0>;
168
169		regulator-boot-on;
170		regulator-always-on;
171	};
172
173	sound {
174		compatible = "amlogic,axg-sound-card";
175		model = "U200";
176		audio-widgets = "Line", "Lineout";
177		audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
178				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
179				 <&tdmin_lb>, <&dioo2133>;
180		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
181				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
182				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
183				"TDM_A Playback", "TDMOUT_A OUT",
184				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
185				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
186				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
187				"TDM_B Playback", "TDMOUT_B OUT",
188				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
189				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
190				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
191				"TDM_C Playback", "TDMOUT_C OUT",
192				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
193				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
194				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3",
195				"SPDIFOUT_B IN 0", "FRDDR_A OUT 4",
196				"SPDIFOUT_B IN 1", "FRDDR_B OUT 4",
197				"SPDIFOUT_B IN 2", "FRDDR_C OUT 4",
198				"TDMIN_A IN 0", "TDM_A Capture",
199				"TDMIN_A IN 1", "TDM_B Capture",
200				"TDMIN_A IN 2", "TDM_C Capture",
201				"TDMIN_A IN 3", "TDM_A Loopback",
202				"TDMIN_A IN 4", "TDM_B Loopback",
203				"TDMIN_A IN 5", "TDM_C Loopback",
204				"TDMIN_B IN 0", "TDM_A Capture",
205				"TDMIN_B IN 1", "TDM_B Capture",
206				"TDMIN_B IN 2", "TDM_C Capture",
207				"TDMIN_B IN 3", "TDM_A Loopback",
208				"TDMIN_B IN 4", "TDM_B Loopback",
209				"TDMIN_B IN 5", "TDM_C Loopback",
210				"TDMIN_C IN 0", "TDM_A Capture",
211				"TDMIN_C IN 1", "TDM_B Capture",
212				"TDMIN_C IN 2", "TDM_C Capture",
213				"TDMIN_C IN 3", "TDM_A Loopback",
214				"TDMIN_C IN 4", "TDM_B Loopback",
215				"TDMIN_C IN 5", "TDM_C Loopback",
216				"TDMIN_LB IN 3", "TDM_A Capture",
217				"TDMIN_LB IN 4", "TDM_B Capture",
218				"TDMIN_LB IN 5", "TDM_C Capture",
219				"TDMIN_LB IN 0", "TDM_A Loopback",
220				"TDMIN_LB IN 1", "TDM_B Loopback",
221				"TDMIN_LB IN 2", "TDM_C Loopback",
222				"TODDR_A IN 0", "TDMIN_A OUT",
223				"TODDR_B IN 0", "TDMIN_A OUT",
224				"TODDR_C IN 0", "TDMIN_A OUT",
225				"TODDR_A IN 1", "TDMIN_B OUT",
226				"TODDR_B IN 1", "TDMIN_B OUT",
227				"TODDR_C IN 1", "TDMIN_B OUT",
228				"TODDR_A IN 2", "TDMIN_C OUT",
229				"TODDR_B IN 2", "TDMIN_C OUT",
230				"TODDR_C IN 2", "TDMIN_C OUT",
231				"TODDR_A IN 3", "SPDIFIN Capture",
232				"TODDR_B IN 3", "SPDIFIN Capture",
233				"TODDR_C IN 3", "SPDIFIN Capture",
234				"TODDR_A IN 6", "TDMIN_LB OUT",
235				"TODDR_B IN 6", "TDMIN_LB OUT",
236				"TODDR_C IN 6", "TDMIN_LB OUT",
237				"10U2 INL", "ACODEC LOLP",
238				"10U2 INR", "ACODEC LORP",
239				"Lineout", "10U2 OUTL",
240				"Lineout", "10U2 OUTR";
241
242		assigned-clocks = <&clkc CLKID_MPLL2>,
243				  <&clkc CLKID_MPLL0>,
244				  <&clkc CLKID_MPLL1>;
245		assigned-clock-parents = <0>, <0>, <0>;
246		assigned-clock-rates = <294912000>,
247				       <270950400>,
248				       <393216000>;
249
250		dai-link-0 {
251			sound-dai = <&frddr_a>;
252		};
253
254		dai-link-1 {
255			sound-dai = <&frddr_b>;
256		};
257
258		dai-link-2 {
259			sound-dai = <&frddr_c>;
260		};
261
262		dai-link-3 {
263			sound-dai = <&toddr_a>;
264		};
265
266		dai-link-4 {
267			sound-dai = <&toddr_b>;
268		};
269
270		dai-link-5 {
271			sound-dai = <&toddr_c>;
272		};
273
274		/* Connected to the WIFI/BT chip */
275		dai-link-6 {
276			sound-dai = <&tdmif_a>;
277			dai-format = "dsp_a";
278			dai-tdm-slot-tx-mask-0 = <1 1>;
279			mclk-fs = <256>;
280
281			codec-0 {
282				sound-dai = <&toacodec TOACODEC_IN_A>;
283			};
284
285			codec-1 {
286				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
287			};
288		};
289
290		/* Connected to the onboard AD82584F DAC */
291		dai-link-7 {
292			sound-dai = <&tdmif_b>;
293			dai-format = "i2s";
294			dai-tdm-slot-tx-mask-0 = <1 1>;
295			mclk-fs = <256>;
296
297			codec-0 {
298				sound-dai = <&toacodec TOACODEC_IN_B>;
299			};
300
301			codec-1 {
302				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
303			};
304		};
305
306		/* 8ch HDMI interface */
307		dai-link-8 {
308			sound-dai = <&tdmif_c>;
309			dai-format = "i2s";
310			dai-tdm-slot-tx-mask-0 = <1 1>;
311			dai-tdm-slot-tx-mask-1 = <1 1>;
312			dai-tdm-slot-tx-mask-2 = <1 1>;
313			dai-tdm-slot-tx-mask-3 = <1 1>;
314			mclk-fs = <256>;
315
316			codec-0 {
317				sound-dai = <&toacodec TOACODEC_IN_C>;
318			};
319
320			codec-1 {
321				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
322			};
323		};
324
325		/* spdif hdmi and coax output */
326		dai-link-9 {
327			sound-dai = <&spdifout_a>;
328
329			codec-0 {
330				sound-dai = <&spdif_dit>;
331			};
332
333			codec-1 {
334				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
335			};
336		};
337
338		/* spdif hdmi interface */
339		dai-link-10 {
340			sound-dai = <&spdifout_b>;
341
342			codec {
343				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
344			};
345		};
346
347		/* hdmi glue */
348		dai-link-11 {
349			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
350
351			codec {
352				sound-dai = <&hdmi_tx>;
353			};
354		};
355
356		/* internal codec glue */
357		dai-link-12 {
358			sound-dai = <&toacodec TOACODEC_OUT>;
359
360			codec {
361				sound-dai = <&acodec>;
362			};
363		};
364
365		/* spdif coax input */
366		dai-link-13 {
367			sound-dai = <&spdifin>;
368
369			codec {
370				sound-dai = <&spdif_dir>;
371			};
372		};
373	};
374};
375
376&acodec {
377	status = "okay";
378};
379
380&arb {
381	status = "okay";
382};
383
384&cec_AO {
385	pinctrl-0 = <&cec_ao_a_h_pins>;
386	pinctrl-names = "default";
387	status = "disabled";
388	hdmi-phandle = <&hdmi_tx>;
389};
390
391&cecb_AO {
392	pinctrl-0 = <&cec_ao_b_h_pins>;
393	pinctrl-names = "default";
394	status = "okay";
395	hdmi-phandle = <&hdmi_tx>;
396};
397
398&clkc_audio {
399	status = "okay";
400};
401
402&cpu0 {
403	cpu-supply = <&vddcpu>;
404	operating-points-v2 = <&cpu_opp_table>;
405	clocks = <&clkc CLKID_CPU_CLK>;
406	clock-latency = <50000>;
407};
408
409&cpu1 {
410	cpu-supply = <&vddcpu>;
411	operating-points-v2 = <&cpu_opp_table>;
412	clocks = <&clkc CLKID_CPU_CLK>;
413	clock-latency = <50000>;
414};
415
416&cpu2 {
417	cpu-supply = <&vddcpu>;
418	operating-points-v2 = <&cpu_opp_table>;
419	clocks = <&clkc CLKID_CPU_CLK>;
420	clock-latency = <50000>;
421};
422
423&cpu3 {
424	cpu-supply = <&vddcpu>;
425	operating-points-v2 = <&cpu_opp_table>;
426	clocks = <&clkc CLKID_CPU_CLK>;
427	clock-latency = <50000>;
428};
429
430&clkc_audio {
431	status = "okay";
432};
433
434&cvbs_vdac_port {
435	cvbs_vdac_out: endpoint {
436		remote-endpoint = <&cvbs_connector_in>;
437	};
438};
439
440&ethmac {
441	status = "okay";
442	phy-handle = <&internal_ephy>;
443	phy-mode = "rmii";
444};
445
446&frddr_a {
447	status = "okay";
448};
449
450&frddr_b {
451	status = "okay";
452};
453
454&frddr_c {
455	status = "okay";
456};
457
458&hdmi_tx {
459	status = "okay";
460	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
461	pinctrl-names = "default";
462	hdmi-supply = <&vcc_5v>;
463};
464
465&hdmi_tx_tmds_port {
466	hdmi_tx_tmds_out: endpoint {
467		remote-endpoint = <&hdmi_connector_in>;
468	};
469};
470
471&ir {
472	status = "okay";
473	pinctrl-0 = <&remote_input_ao_pins>;
474	pinctrl-names = "default";
475};
476
477/* i2c Touch */
478&i2c0 {
479	status = "okay";
480	pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>;
481	pinctrl-names = "default";
482};
483
484/* i2c CM */
485&i2c2 {
486	status = "okay";
487	pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>;
488	pinctrl-names = "default";
489};
490
491/* i2c Audio */
492&i2c3 {
493	status = "okay";
494	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
495	pinctrl-names = "default";
496};
497
498&pwm_AO_cd {
499	pinctrl-0 = <&pwm_ao_d_e_pins>;
500	pinctrl-names = "default";
501	clocks = <&xtal>;
502	clock-names = "clkin1";
503	status = "okay";
504};
505
506/* SD card */
507&sd_emmc_b {
508	status = "okay";
509	pinctrl-0 = <&sdcard_c_pins>;
510	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
511	pinctrl-names = "default", "clk-gate";
512
513	bus-width = <4>;
514	cap-sd-highspeed;
515	max-frequency = <50000000>;
516	disable-wp;
517
518	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
519	vmmc-supply = <&vddao_3v3>;
520	vqmmc-supply = <&vddao_3v3>;
521};
522
523/* eMMC */
524&sd_emmc_c {
525	status = "okay";
526	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
527	pinctrl-1 = <&emmc_clk_gate_pins>;
528	pinctrl-names = "default", "clk-gate";
529
530	bus-width = <8>;
531	cap-mmc-highspeed;
532	mmc-ddr-1_8v;
533	mmc-hs200-1_8v;
534	max-frequency = <200000000>;
535	non-removable;
536	disable-wp;
537
538	mmc-pwrseq = <&emmc_pwrseq>;
539	vmmc-supply = <&vcc_3v3>;
540	vqmmc-supply = <&flash_1v8>;
541};
542
543&spdifin {
544	pinctrl-0 = <&spdif_in_h_pins>;
545	pinctrl-names = "default";
546	status = "okay";
547};
548
549&spdifout_a {
550	pinctrl-0 = <&spdif_ao_out_pins>;
551	pinctrl-names = "default";
552	status = "okay";
553};
554
555&spdifout_b {
556	status = "okay";
557};
558
559&tdmif_a {
560	pinctrl-0 = <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>, <&tdm_a_dout0_pins> ;
561	pinctrl-names = "default";
562	status = "okay";
563};
564
565&tdmif_b {
566	pinctrl-0 = <&mclk0_a_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>,
567		    <&tdm_b_dout0_pins>;
568	pinctrl-names = "default";
569	status = "okay";
570
571	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_MCLK_PAD0>,
572			  <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
573			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
574	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
575				 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
576				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
577	assigned-clock-rates = <0>, <0>, <0>;
578};
579
580&tdmif_c {
581	status = "okay";
582};
583
584&tdmin_a {
585	status = "okay";
586};
587
588&tdmin_b {
589	status = "okay";
590};
591
592&tdmin_c {
593	status = "okay";
594};
595
596&tdmin_lb {
597	status = "okay";
598};
599
600&tdmout_a {
601	status = "okay";
602};
603
604&tdmout_b {
605	status = "okay";
606};
607
608&tdmout_c {
609	status = "okay";
610};
611
612&toacodec {
613	status = "okay";
614};
615
616&toddr_a {
617	status = "okay";
618};
619
620&toddr_b {
621	status = "okay";
622};
623
624&toddr_c {
625	status = "okay";
626};
627
628&tohdmitx {
629	status = "okay";
630};
631
632&uart_AO {
633	status = "okay";
634	pinctrl-0 = <&uart_ao_a_pins>;
635	pinctrl-names = "default";
636};
637
638&usb {
639	status = "okay";
640	vbus-supply = <&usb_pwr_en>;
641};
642
643&usb2_phy0 {
644	phy-supply = <&vcc_5v>;
645};
646
647&usb2_phy1 {
648	phy-supply = <&vcc_5v>;
649};
650