1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2022, Intel Corporation 4 */ 5 6#include "socfpga_stratix10.dtsi" 7 8/ { 9 model = "SOCFPGA Stratix 10 SWVP"; 10 compatible = "altr,socfpga-stratix10-swvp", "altr,socfpga-stratix10"; 11 12 aliases { 13 serial0 = &uart0; 14 serial1 = &uart1; 15 16 timer0 = &timer0; 17 timer1 = &timer1; 18 timer2 = &timer2; 19 timer3 = &timer3; 20 21 ethernet0 = &gmac0; 22 ethernet1 = &gmac1; 23 ethernet2 = &gmac2; 24 }; 25 26 chosen { 27 stdout-path = "serial1:115200n8"; 28 linux,initrd-start = <0x10000000>; 29 linux,initrd-end = <0x125c8324>; 30 }; 31 32 memory@80000000 { 33 device_type = "memory"; 34 reg = <0x0 0x0 0x0 0x80000000>; 35 }; 36}; 37 38&cpu0 { 39 enable-method = "spin-table"; 40 cpu-release-addr = <0x0 0x0000fff8>; 41}; 42 43&cpu1 { 44 enable-method = "spin-table"; 45 cpu-release-addr = <0x0 0x0000fff8>; 46}; 47 48&cpu2 { 49 enable-method = "spin-table"; 50 cpu-release-addr = <0x0 0x0000fff8>; 51}; 52 53&cpu3 { 54 enable-method = "spin-table"; 55 cpu-release-addr = <0x0 0x0000fff8>; 56}; 57 58&osc1 { 59 clock-frequency = <25000000>; 60}; 61 62&gmac0 { 63 status = "okay"; 64 phy-mode = "rgmii"; 65 phy-addr = <0xffffffff>; 66 snps,max-mtu = <0x0>; 67}; 68 69&gmac1 { 70 status = "okay"; 71 phy-mode = "rgmii"; 72 phy-addr = <0xffffffff>; 73}; 74 75&gmac2 { 76 status = "okay"; 77 phy-mode = "rgmii"; 78 phy-addr = <0xffffffff>; 79}; 80 81&mmc { 82 status = "okay"; 83 altr,dw-mshc-ciu-div = <0x3>; 84 altr,dw-mshc-sdr-timing = <0x0 0x3>; 85 cap-sd-highspeed; 86 cap-mmc-highspeed; 87 broken-cd; 88 bus-width = <4>; 89}; 90 91&uart0 { 92 status = "okay"; 93}; 94 95&uart1 { 96 status = "okay"; 97}; 98 99&usb0 { 100 clocks = <&clkmgr STRATIX10_L4_MP_CLK>; 101 status = "okay"; 102}; 103 104&usb1 { 105 clocks = <&clkmgr STRATIX10_L4_MP_CLK>; 106 status = "okay"; 107}; 108 109&rst { 110 altr,modrst-offset = <0x20>; 111}; 112 113&sysmgr { 114 reg = <0xffd12000 0x1000>; 115 interrupts = <0x0 0x10 0x4>; 116 cpu1-start-addr = <0xffd06230>; 117}; 118