1// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2/* 3 * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>. 4 */ 5 6#include "sun50i-h700-anbernic-rg35xx-2024.dts" 7 8/ { 9 model = "Anbernic RG35XX Plus"; 10 compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700"; 11 12 wifi_pwrseq: pwrseq { 13 compatible = "mmc-pwrseq-simple"; 14 clocks = <&rtc CLK_OSC32K_FANOUT>; 15 clock-names = "ext_clock"; 16 pinctrl-0 = <&x32clk_fanout_pin>; 17 pinctrl-names = "default"; 18 post-power-on-delay-ms = <200>; 19 reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ 20 }; 21}; 22 23/* SDIO WiFi RTL8821CS */ 24&mmc1 { 25 vmmc-supply = <®_cldo4>; 26 vqmmc-supply = <®_aldo4>; 27 mmc-pwrseq = <&wifi_pwrseq>; 28 bus-width = <4>; 29 non-removable; 30 status = "okay"; 31 32 sdio_wifi: wifi@1 { 33 reg = <1>; 34 interrupt-parent = <&pio>; 35 interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */ 36 interrupt-names = "host-wake"; 37 }; 38}; 39 40/* Bluetooth RTL8821CS */ 41&uart1 { 42 pinctrl-names = "default"; 43 pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; 44 uart-has-rtscts; 45 status = "okay"; 46 47 bluetooth { 48 compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; 49 device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */ 50 enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */ 51 host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */ 52 }; 53}; 54