xref: /linux/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts (revision 8048b8358031ae742c1c8f16f196f6d8070bb09f) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2// Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
3
4/dts-v1/;
5
6#include "sun50i-h6.dtsi"
7#include "sun50i-h6-cpu-opp.dtsi"
8#include "sun50i-h6-gpu-opp.dtsi"
9
10#include <dt-bindings/gpio/gpio.h>
11
12/ {
13	model = "Beelink GS1";
14	compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
15
16	aliases {
17		ethernet0 = &emac;
18		serial0 = &uart0;
19	};
20
21	chosen {
22		stdout-path = "serial0:115200n8";
23	};
24
25	connector {
26		compatible = "hdmi-connector";
27		type = "a";
28		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
29
30		port {
31			hdmi_con_in: endpoint {
32				remote-endpoint = <&hdmi_out_con>;
33			};
34		};
35	};
36
37	ext_osc32k: ext_osc32k_clk {
38		#clock-cells = <0>;
39		compatible = "fixed-clock";
40		clock-frequency = <32768>;
41		clock-output-names = "ext_osc32k";
42	};
43
44	leds {
45		compatible = "gpio-leds";
46
47		led {
48			label = "beelink:white:power";
49			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
50			default-state = "on";
51		};
52	};
53
54	reg_vcc5v: vcc5v {
55		/* board wide 5V supply directly from the DC jack */
56		compatible = "regulator-fixed";
57		regulator-name = "vcc-5v";
58		regulator-min-microvolt = <5000000>;
59		regulator-max-microvolt = <5000000>;
60		regulator-always-on;
61	};
62
63	sound-spdif {
64		compatible = "simple-audio-card";
65		simple-audio-card,name = "sun50i-h6-spdif";
66
67		simple-audio-card,cpu {
68			sound-dai = <&spdif>;
69		};
70
71		simple-audio-card,codec {
72			sound-dai = <&spdif_out>;
73		};
74	};
75
76	spdif_out: spdif-out {
77		#sound-dai-cells = <0>;
78		compatible = "linux,spdif-dit";
79	};
80};
81
82&cpu0 {
83	cpu-supply = <&reg_dcdca>;
84};
85
86&de {
87	status = "okay";
88};
89
90&dwc3 {
91	status = "okay";
92};
93
94&ehci0 {
95	status = "okay";
96};
97
98&emac {
99	pinctrl-names = "default";
100	pinctrl-0 = <&ext_rgmii_pins>;
101	phy-mode = "rgmii-id";
102	phy-handle = <&ext_rgmii_phy>;
103	phy-supply = <&reg_aldo2>;
104	status = "okay";
105};
106
107&gpu {
108	mali-supply = <&reg_dcdcc>;
109	status = "okay";
110};
111
112&hdmi {
113	status = "okay";
114};
115
116&hdmi_out {
117	hdmi_out_con: endpoint {
118		remote-endpoint = <&hdmi_con_in>;
119	};
120};
121
122&mdio {
123	ext_rgmii_phy: ethernet-phy@1 {
124		compatible = "ethernet-phy-ieee802.3-c22";
125		reg = <1>;
126	};
127};
128
129&mmc0 {
130	vmmc-supply = <&reg_cldo1>;
131	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
132	bus-width = <4>;
133	status = "okay";
134};
135
136&mmc2 {
137	vmmc-supply = <&reg_cldo1>;
138	vqmmc-supply = <&reg_bldo2>;
139	non-removable;
140	cap-mmc-hw-reset;
141	bus-width = <8>;
142	status = "okay";
143};
144
145&ohci0 {
146	status = "okay";
147};
148
149&pio {
150	vcc-pd-supply = <&reg_cldo1>;
151	vcc-pg-supply = <&reg_aldo1>;
152};
153
154&r_ir {
155	linux,rc-map-name = "rc-beelink-gs1";
156	status = "okay";
157};
158
159&r_pio {
160	/*
161	 * FIXME: We can't add that supply for now since it would
162	 * create a circular dependency between pinctrl, the regulator
163	 * and the RSB Bus.
164	 *
165	 * vcc-pl-supply = <&reg_aldo1>;
166	 */
167	vcc-pm-supply = <&reg_aldo1>;
168};
169
170&r_rsb {
171	status = "okay";
172
173	axp805: pmic@745 {
174		compatible = "x-powers,axp805", "x-powers,axp806";
175		reg = <0x745>;
176		interrupt-parent = <&r_intc>;
177		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
178		interrupt-controller;
179		#interrupt-cells = <1>;
180		x-powers,self-working-mode;
181		vina-supply = <&reg_vcc5v>;
182		vinb-supply = <&reg_vcc5v>;
183		vinc-supply = <&reg_vcc5v>;
184		vind-supply = <&reg_vcc5v>;
185		vine-supply = <&reg_vcc5v>;
186		aldoin-supply = <&reg_vcc5v>;
187		bldoin-supply = <&reg_vcc5v>;
188		cldoin-supply = <&reg_vcc5v>;
189
190		regulators {
191			reg_aldo1: aldo1 {
192				regulator-always-on;
193				regulator-min-microvolt = <3300000>;
194				regulator-max-microvolt = <3300000>;
195				regulator-name = "vcc-pl";
196			};
197
198			reg_aldo2: aldo2 {
199				regulator-min-microvolt = <3300000>;
200				regulator-max-microvolt = <3300000>;
201				regulator-name = "vcc-ac200";
202				regulator-enable-ramp-delay = <100000>;
203			};
204
205			reg_aldo3: aldo3 {
206				regulator-always-on;
207				regulator-min-microvolt = <3300000>;
208				regulator-max-microvolt = <3300000>;
209				regulator-name = "vcc25-dram";
210			};
211
212			reg_bldo1: bldo1 {
213				regulator-always-on;
214				regulator-min-microvolt = <1800000>;
215				regulator-max-microvolt = <1800000>;
216				regulator-name = "vcc-bias-pll";
217			};
218
219			reg_bldo2: bldo2 {
220				regulator-always-on;
221				regulator-min-microvolt = <1800000>;
222				regulator-max-microvolt = <1800000>;
223				regulator-name = "vcc-efuse-pcie-hdmi-io";
224			};
225
226			reg_bldo3: bldo3 {
227				regulator-always-on;
228				regulator-min-microvolt = <1800000>;
229				regulator-max-microvolt = <1800000>;
230				regulator-name = "vcc-dcxoio";
231			};
232
233			bldo4 {
234				/* unused */
235			};
236
237			reg_cldo1: cldo1 {
238				regulator-always-on;
239				regulator-min-microvolt = <3300000>;
240				regulator-max-microvolt = <3300000>;
241				regulator-name = "vcc-3v3";
242			};
243
244			reg_cldo2: cldo2 {
245				regulator-min-microvolt = <3300000>;
246				regulator-max-microvolt = <3300000>;
247				regulator-name = "vcc-wifi-1";
248			};
249
250			reg_cldo3: cldo3 {
251				regulator-min-microvolt = <3300000>;
252				regulator-max-microvolt = <3300000>;
253				regulator-name = "vcc-wifi-2";
254			};
255
256			reg_dcdca: dcdca {
257				regulator-always-on;
258				regulator-min-microvolt = <810000>;
259				regulator-max-microvolt = <1160000>;
260				regulator-ramp-delay = <2500>;
261				regulator-name = "vdd-cpu";
262			};
263
264			reg_dcdcc: dcdcc {
265				regulator-enable-ramp-delay = <32000>;
266				regulator-min-microvolt = <810000>;
267				regulator-max-microvolt = <1080000>;
268				regulator-ramp-delay = <2500>;
269				regulator-name = "vdd-gpu";
270			};
271
272			reg_dcdcd: dcdcd {
273				regulator-always-on;
274				regulator-min-microvolt = <960000>;
275				regulator-max-microvolt = <960000>;
276				regulator-name = "vdd-sys";
277			};
278
279			reg_dcdce: dcdce {
280				regulator-always-on;
281				regulator-min-microvolt = <1200000>;
282				regulator-max-microvolt = <1200000>;
283				regulator-name = "vcc-dram";
284			};
285
286			sw {
287				/* unused */
288			};
289		};
290	};
291};
292
293&spdif {
294	status = "okay";
295};
296
297&uart0 {
298	pinctrl-names = "default";
299	pinctrl-0 = <&uart0_ph_pins>;
300	status = "okay";
301};
302
303&usb2otg {
304	dr_mode = "host";
305	status = "okay";
306};
307
308&usb2phy {
309	usb0_vbus-supply = <&reg_vcc5v>;
310	status = "okay";
311};
312
313&usb3phy {
314	status = "okay";
315};
316