1/* 2 * linux/arch/arm/mm/proc-v6.S 3 * 4 * Copyright (C) 2001 Deep Blue Solutions Ltd. 5 * Modified by Catalin Marinas for noMMU support 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 * 11 * This is the "shell" of the ARMv6 processor support. 12 */ 13#include <linux/init.h> 14#include <linux/linkage.h> 15#include <asm/assembler.h> 16#include <asm/asm-offsets.h> 17#include <asm/hwcap.h> 18#include <asm/pgtable-hwdef.h> 19#include <asm/pgtable.h> 20 21#include "proc-macros.S" 22 23#define D_CACHE_LINE_SIZE 32 24 25#define TTB_C (1 << 0) 26#define TTB_S (1 << 1) 27#define TTB_IMP (1 << 2) 28#define TTB_RGN_NC (0 << 3) 29#define TTB_RGN_WBWA (1 << 3) 30#define TTB_RGN_WT (2 << 3) 31#define TTB_RGN_WB (3 << 3) 32 33#define TTB_FLAGS_UP TTB_RGN_WBWA 34#define PMD_FLAGS_UP PMD_SECT_WB 35#define TTB_FLAGS_SMP TTB_RGN_WBWA|TTB_S 36#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S 37 38ENTRY(cpu_v6_proc_init) 39 ret lr 40 41ENTRY(cpu_v6_proc_fin) 42 mrc p15, 0, r0, c1, c0, 0 @ ctrl register 43 bic r0, r0, #0x1000 @ ...i............ 44 bic r0, r0, #0x0006 @ .............ca. 45 mcr p15, 0, r0, c1, c0, 0 @ disable caches 46 ret lr 47 48/* 49 * cpu_v6_reset(loc) 50 * 51 * Perform a soft reset of the system. Put the CPU into the 52 * same state as it would be if it had been reset, and branch 53 * to what would be the reset vector. 54 * 55 * - loc - location to jump to for soft reset 56 */ 57 .align 5 58 .pushsection .idmap.text, "ax" 59ENTRY(cpu_v6_reset) 60 mrc p15, 0, r1, c1, c0, 0 @ ctrl register 61 bic r1, r1, #0x1 @ ...............m 62 mcr p15, 0, r1, c1, c0, 0 @ disable MMU 63 mov r1, #0 64 mcr p15, 0, r1, c7, c5, 4 @ ISB 65 ret r0 66ENDPROC(cpu_v6_reset) 67 .popsection 68 69/* 70 * cpu_v6_do_idle() 71 * 72 * Idle the processor (eg, wait for interrupt). 73 * 74 * IRQs are already disabled. 75 */ 76ENTRY(cpu_v6_do_idle) 77 mov r1, #0 78 mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode 79 mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt 80 ret lr 81 82ENTRY(cpu_v6_dcache_clean_area) 831: mcr p15, 0, r0, c7, c10, 1 @ clean D entry 84 add r0, r0, #D_CACHE_LINE_SIZE 85 subs r1, r1, #D_CACHE_LINE_SIZE 86 bhi 1b 87 ret lr 88 89/* 90 * cpu_v6_switch_mm(pgd_phys, tsk) 91 * 92 * Set the translation table base pointer to be pgd_phys 93 * 94 * - pgd_phys - physical address of new TTB 95 * 96 * It is assumed that: 97 * - we are not using split page tables 98 */ 99ENTRY(cpu_v6_switch_mm) 100#ifdef CONFIG_MMU 101 mov r2, #0 102 mmid r1, r1 @ get mm->context.id 103 ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) 104 ALT_UP(orr r0, r0, #TTB_FLAGS_UP) 105 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB 106 mcr p15, 0, r2, c7, c10, 4 @ drain write buffer 107 mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 108#ifdef CONFIG_PID_IN_CONTEXTIDR 109 mrc p15, 0, r2, c13, c0, 1 @ read current context ID 110 bic r2, r2, #0xff @ extract the PID 111 and r1, r1, #0xff 112 orr r1, r1, r2 @ insert into new context ID 113#endif 114 mcr p15, 0, r1, c13, c0, 1 @ set context ID 115#endif 116 ret lr 117 118/* 119 * cpu_v6_set_pte_ext(ptep, pte, ext) 120 * 121 * Set a level 2 translation table entry. 122 * 123 * - ptep - pointer to level 2 translation table entry 124 * (hardware version is stored at -1024 bytes) 125 * - pte - PTE value to store 126 * - ext - value for extended PTE bits 127 */ 128 armv6_mt_table cpu_v6 129 130ENTRY(cpu_v6_set_pte_ext) 131#ifdef CONFIG_MMU 132 armv6_set_pte_ext cpu_v6 133#endif 134 ret lr 135 136/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ 137.globl cpu_v6_suspend_size 138.equ cpu_v6_suspend_size, 4 * 6 139#ifdef CONFIG_ARM_CPU_SUSPEND 140ENTRY(cpu_v6_do_suspend) 141 stmfd sp!, {r4 - r9, lr} 142 mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID 143#ifdef CONFIG_MMU 144 mrc p15, 0, r5, c3, c0, 0 @ Domain ID 145 mrc p15, 0, r6, c2, c0, 1 @ Translation table base 1 146#endif 147 mrc p15, 0, r7, c1, c0, 1 @ auxiliary control register 148 mrc p15, 0, r8, c1, c0, 2 @ co-processor access control 149 mrc p15, 0, r9, c1, c0, 0 @ control register 150 stmia r0, {r4 - r9} 151 ldmfd sp!, {r4- r9, pc} 152ENDPROC(cpu_v6_do_suspend) 153 154ENTRY(cpu_v6_do_resume) 155 mov ip, #0 156 mcr p15, 0, ip, c7, c14, 0 @ clean+invalidate D cache 157 mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache 158 mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache 159 mcr p15, 0, ip, c7, c10, 4 @ drain write buffer 160 mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID 161 ldmia r0, {r4 - r9} 162 mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID 163#ifdef CONFIG_MMU 164 mcr p15, 0, r5, c3, c0, 0 @ Domain ID 165 ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP) 166 ALT_UP(orr r1, r1, #TTB_FLAGS_UP) 167 mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0 168 mcr p15, 0, r6, c2, c0, 1 @ Translation table base 1 169 mcr p15, 0, ip, c2, c0, 2 @ TTB control register 170#endif 171 mcr p15, 0, r7, c1, c0, 1 @ auxiliary control register 172 mcr p15, 0, r8, c1, c0, 2 @ co-processor access control 173 mcr p15, 0, ip, c7, c5, 4 @ ISB 174 mov r0, r9 @ control register 175 b cpu_resume_mmu 176ENDPROC(cpu_v6_do_resume) 177#endif 178 179 string cpu_v6_name, "ARMv6-compatible processor" 180 181 .align 182 183/* 184 * __v6_setup 185 * 186 * Initialise TLB, Caches, and MMU state ready to switch the MMU 187 * on. Return in r0 the new CP15 C1 control register setting. 188 * 189 * We automatically detect if we have a Harvard cache, and use the 190 * Harvard cache control instructions insead of the unified cache 191 * control instructions. 192 * 193 * This should be able to cover all ARMv6 cores. 194 * 195 * It is assumed that: 196 * - cache type register is implemented 197 */ 198__v6_setup: 199#ifdef CONFIG_SMP 200 ALT_SMP(mrc p15, 0, r0, c1, c0, 1) @ Enable SMP/nAMP mode 201 ALT_UP(nop) 202 orr r0, r0, #0x20 203 ALT_SMP(mcr p15, 0, r0, c1, c0, 1) 204 ALT_UP(nop) 205#endif 206 207 mov r0, #0 208 mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache 209 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache 210 mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache 211#ifdef CONFIG_MMU 212 mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs 213 mcr p15, 0, r0, c2, c0, 2 @ TTB control register 214 ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) 215 ALT_UP(orr r4, r4, #TTB_FLAGS_UP) 216 ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) 217 ALT_UP(orr r8, r8, #TTB_FLAGS_UP) 218 mcr p15, 0, r8, c2, c0, 1 @ load TTB1 219#endif /* CONFIG_MMU */ 220 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer and 221 @ complete invalidations 222 adr r5, v6_crval 223 ldmia r5, {r5, r6} 224 ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables 225 mrc p15, 0, r0, c1, c0, 0 @ read control register 226 bic r0, r0, r5 @ clear bits them 227 orr r0, r0, r6 @ set them 228#ifdef CONFIG_ARM_ERRATA_364296 229 /* 230 * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data 231 * corruption with hit-under-miss enabled). The conditional code below 232 * (setting the undocumented bit 31 in the auxiliary control register 233 * and the FI bit in the control register) disables hit-under-miss 234 * without putting the processor into full low interrupt latency mode. 235 */ 236 ldr r6, =0x4107b362 @ id for ARM1136 r0p2 237 mrc p15, 0, r5, c0, c0, 0 @ get processor id 238 teq r5, r6 @ check for the faulty core 239 mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg 240 orreq r5, r5, #(1 << 31) @ set the undocumented bit 31 241 mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg 242 orreq r0, r0, #(1 << 21) @ low interrupt latency configuration 243#endif 244 ret lr @ return to head.S:__ret 245 246 /* 247 * V X F I D LR 248 * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM 249 * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced 250 * 0 110 0011 1.00 .111 1101 < we want 251 */ 252 .type v6_crval, #object 253v6_crval: 254 crval clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c 255 256 __INITDATA 257 258 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) 259 define_processor_functions v6, dabort=v6_early_abort, pabort=v6_pabort, suspend=1 260 261 .section ".rodata" 262 263 string cpu_arch_name, "armv6" 264 string cpu_elf_name, "v6" 265 .align 266 267 .section ".proc.info.init", #alloc, #execinstr 268 269 /* 270 * Match any ARMv6 processor core. 271 */ 272 .type __v6_proc_info, #object 273__v6_proc_info: 274 .long 0x0007b000 275 .long 0x0007f000 276 ALT_SMP(.long \ 277 PMD_TYPE_SECT | \ 278 PMD_SECT_AP_WRITE | \ 279 PMD_SECT_AP_READ | \ 280 PMD_FLAGS_SMP) 281 ALT_UP(.long \ 282 PMD_TYPE_SECT | \ 283 PMD_SECT_AP_WRITE | \ 284 PMD_SECT_AP_READ | \ 285 PMD_FLAGS_UP) 286 .long PMD_TYPE_SECT | \ 287 PMD_SECT_XN | \ 288 PMD_SECT_AP_WRITE | \ 289 PMD_SECT_AP_READ 290 b __v6_setup 291 .long cpu_arch_name 292 .long cpu_elf_name 293 /* See also feat_v6_fixup() for HWCAP_TLS */ 294 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA|HWCAP_TLS 295 .long cpu_v6_name 296 .long v6_processor_functions 297 .long v6wbi_tlb_fns 298 .long v6_user_fns 299 .long v6_cache_fns 300 .size __v6_proc_info, . - __v6_proc_info 301