1/* 2 * linux/arch/arm/mm/cache-v6.S 3 * 4 * Copyright (C) 2001 Deep Blue Solutions Ltd. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 * 10 * This is the "shell" of the ARMv6 processor support. 11 */ 12#include <linux/linkage.h> 13#include <linux/init.h> 14#include <asm/assembler.h> 15#include <asm/errno.h> 16#include <asm/unwind.h> 17 18#include "proc-macros.S" 19 20#define HARVARD_CACHE 21#define CACHE_LINE_SIZE 32 22#define D_CACHE_LINE_SIZE 32 23#define BTB_FLUSH_SIZE 8 24 25/* 26 * v6_flush_icache_all() 27 * 28 * Flush the whole I-cache. 29 * 30 * ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail. 31 * This erratum is present in 1136, 1156 and 1176. It does not affect the 32 * MPCore. 33 * 34 * Registers: 35 * r0 - set to 0 36 * r1 - corrupted 37 */ 38ENTRY(v6_flush_icache_all) 39 mov r0, #0 40#ifdef CONFIG_ARM_ERRATA_411920 41 mrs r1, cpsr 42 cpsid ifa @ disable interrupts 43 mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache 44 mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache 45 mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache 46 mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache 47 msr cpsr_cx, r1 @ restore interrupts 48 .rept 11 @ ARM Ltd recommends at least 49 nop @ 11 NOPs 50 .endr 51#else 52 mcr p15, 0, r0, c7, c5, 0 @ invalidate I-cache 53#endif 54 mov pc, lr 55ENDPROC(v6_flush_icache_all) 56 57/* 58 * v6_flush_cache_all() 59 * 60 * Flush the entire cache. 61 * 62 * It is assumed that: 63 */ 64ENTRY(v6_flush_kern_cache_all) 65 mov r0, #0 66#ifdef HARVARD_CACHE 67 mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate 68#ifndef CONFIG_ARM_ERRATA_411920 69 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate 70#else 71 b v6_flush_icache_all 72#endif 73#else 74 mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate 75#endif 76 mov pc, lr 77 78/* 79 * v6_flush_cache_all() 80 * 81 * Flush all TLB entries in a particular address space 82 * 83 * - mm - mm_struct describing address space 84 */ 85ENTRY(v6_flush_user_cache_all) 86 /*FALLTHROUGH*/ 87 88/* 89 * v6_flush_cache_range(start, end, flags) 90 * 91 * Flush a range of TLB entries in the specified address space. 92 * 93 * - start - start address (may not be aligned) 94 * - end - end address (exclusive, may not be aligned) 95 * - flags - vm_area_struct flags describing address space 96 * 97 * It is assumed that: 98 * - we have a VIPT cache. 99 */ 100ENTRY(v6_flush_user_cache_range) 101 mov pc, lr 102 103/* 104 * v6_coherent_kern_range(start,end) 105 * 106 * Ensure that the I and D caches are coherent within specified 107 * region. This is typically used when code has been written to 108 * a memory region, and will be executed. 109 * 110 * - start - virtual start address of region 111 * - end - virtual end address of region 112 * 113 * It is assumed that: 114 * - the Icache does not read data from the write buffer 115 */ 116ENTRY(v6_coherent_kern_range) 117 /* FALLTHROUGH */ 118 119/* 120 * v6_coherent_user_range(start,end) 121 * 122 * Ensure that the I and D caches are coherent within specified 123 * region. This is typically used when code has been written to 124 * a memory region, and will be executed. 125 * 126 * - start - virtual start address of region 127 * - end - virtual end address of region 128 * 129 * It is assumed that: 130 * - the Icache does not read data from the write buffer 131 */ 132ENTRY(v6_coherent_user_range) 133 UNWIND(.fnstart ) 134#ifdef HARVARD_CACHE 135 bic r0, r0, #CACHE_LINE_SIZE - 1 1361: 137 USER( mcr p15, 0, r0, c7, c10, 1 ) @ clean D line 138 add r0, r0, #CACHE_LINE_SIZE 139 cmp r0, r1 140 blo 1b 141#endif 142 mov r0, #0 143#ifdef HARVARD_CACHE 144 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer 145#ifndef CONFIG_ARM_ERRATA_411920 146 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate 147#else 148 b v6_flush_icache_all 149#endif 150#else 151 mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB 152#endif 153 mov pc, lr 154 155/* 156 * Fault handling for the cache operation above. If the virtual address in r0 157 * isn't mapped, fail with -EFAULT. 158 */ 1599001: 160 mov r0, #-EFAULT 161 mov pc, lr 162 UNWIND(.fnend ) 163ENDPROC(v6_coherent_user_range) 164ENDPROC(v6_coherent_kern_range) 165 166/* 167 * v6_flush_kern_dcache_area(void *addr, size_t size) 168 * 169 * Ensure that the data held in the page kaddr is written back 170 * to the page in question. 171 * 172 * - addr - kernel address 173 * - size - region size 174 */ 175ENTRY(v6_flush_kern_dcache_area) 176 add r1, r0, r1 177 bic r0, r0, #D_CACHE_LINE_SIZE - 1 1781: 179#ifdef HARVARD_CACHE 180 mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line 181#else 182 mcr p15, 0, r0, c7, c15, 1 @ clean & invalidate unified line 183#endif 184 add r0, r0, #D_CACHE_LINE_SIZE 185 cmp r0, r1 186 blo 1b 187#ifdef HARVARD_CACHE 188 mov r0, #0 189 mcr p15, 0, r0, c7, c10, 4 190#endif 191 mov pc, lr 192 193 194/* 195 * v6_dma_inv_range(start,end) 196 * 197 * Invalidate the data cache within the specified region; we will 198 * be performing a DMA operation in this region and we want to 199 * purge old data in the cache. 200 * 201 * - start - virtual start address of region 202 * - end - virtual end address of region 203 */ 204v6_dma_inv_range: 205#ifdef CONFIG_DMA_CACHE_RWFO 206 ldrb r2, [r0] @ read for ownership 207 strb r2, [r0] @ write for ownership 208#endif 209 tst r0, #D_CACHE_LINE_SIZE - 1 210 bic r0, r0, #D_CACHE_LINE_SIZE - 1 211#ifdef HARVARD_CACHE 212 mcrne p15, 0, r0, c7, c10, 1 @ clean D line 213#else 214 mcrne p15, 0, r0, c7, c11, 1 @ clean unified line 215#endif 216 tst r1, #D_CACHE_LINE_SIZE - 1 217#ifdef CONFIG_DMA_CACHE_RWFO 218 ldrneb r2, [r1, #-1] @ read for ownership 219 strneb r2, [r1, #-1] @ write for ownership 220#endif 221 bic r1, r1, #D_CACHE_LINE_SIZE - 1 222#ifdef HARVARD_CACHE 223 mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line 224#else 225 mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line 226#endif 2271: 228#ifdef HARVARD_CACHE 229 mcr p15, 0, r0, c7, c6, 1 @ invalidate D line 230#else 231 mcr p15, 0, r0, c7, c7, 1 @ invalidate unified line 232#endif 233 add r0, r0, #D_CACHE_LINE_SIZE 234 cmp r0, r1 235#ifdef CONFIG_DMA_CACHE_RWFO 236 ldrlo r2, [r0] @ read for ownership 237 strlo r2, [r0] @ write for ownership 238#endif 239 blo 1b 240 mov r0, #0 241 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer 242 mov pc, lr 243 244/* 245 * v6_dma_clean_range(start,end) 246 * - start - virtual start address of region 247 * - end - virtual end address of region 248 */ 249v6_dma_clean_range: 250 bic r0, r0, #D_CACHE_LINE_SIZE - 1 2511: 252#ifdef CONFIG_DMA_CACHE_RWFO 253 ldr r2, [r0] @ read for ownership 254#endif 255#ifdef HARVARD_CACHE 256 mcr p15, 0, r0, c7, c10, 1 @ clean D line 257#else 258 mcr p15, 0, r0, c7, c11, 1 @ clean unified line 259#endif 260 add r0, r0, #D_CACHE_LINE_SIZE 261 cmp r0, r1 262 blo 1b 263 mov r0, #0 264 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer 265 mov pc, lr 266 267/* 268 * v6_dma_flush_range(start,end) 269 * - start - virtual start address of region 270 * - end - virtual end address of region 271 */ 272ENTRY(v6_dma_flush_range) 273#ifdef CONFIG_DMA_CACHE_RWFO 274 ldrb r2, [r0] @ read for ownership 275 strb r2, [r0] @ write for ownership 276#endif 277 bic r0, r0, #D_CACHE_LINE_SIZE - 1 2781: 279#ifdef HARVARD_CACHE 280 mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line 281#else 282 mcr p15, 0, r0, c7, c15, 1 @ clean & invalidate line 283#endif 284 add r0, r0, #D_CACHE_LINE_SIZE 285 cmp r0, r1 286#ifdef CONFIG_DMA_CACHE_RWFO 287 ldrlob r2, [r0] @ read for ownership 288 strlob r2, [r0] @ write for ownership 289#endif 290 blo 1b 291 mov r0, #0 292 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer 293 mov pc, lr 294 295/* 296 * dma_map_area(start, size, dir) 297 * - start - kernel virtual start address 298 * - size - size of region 299 * - dir - DMA direction 300 */ 301ENTRY(v6_dma_map_area) 302 add r1, r1, r0 303 teq r2, #DMA_FROM_DEVICE 304 beq v6_dma_inv_range 305#ifndef CONFIG_DMA_CACHE_RWFO 306 b v6_dma_clean_range 307#else 308 teq r2, #DMA_TO_DEVICE 309 beq v6_dma_clean_range 310 b v6_dma_flush_range 311#endif 312ENDPROC(v6_dma_map_area) 313 314/* 315 * dma_unmap_area(start, size, dir) 316 * - start - kernel virtual start address 317 * - size - size of region 318 * - dir - DMA direction 319 */ 320ENTRY(v6_dma_unmap_area) 321#ifndef CONFIG_DMA_CACHE_RWFO 322 add r1, r1, r0 323 teq r2, #DMA_TO_DEVICE 324 bne v6_dma_inv_range 325#endif 326 mov pc, lr 327ENDPROC(v6_dma_unmap_area) 328 329 .globl v6_flush_kern_cache_louis 330 .equ v6_flush_kern_cache_louis, v6_flush_kern_cache_all 331 332 __INITDATA 333 334 @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) 335 define_cache_functions v6 336