1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. 4 * Copyright (c) 2011, Google, Inc. 5 * 6 * Author: Colin Cross <ccross@android.com> 7 * Gary King <gking@nvidia.com> 8 */ 9 10#include <linux/linkage.h> 11 12#include <soc/tegra/flowctrl.h> 13 14#include <asm/assembler.h> 15#include <asm/proc-fns.h> 16#include <asm/cp15.h> 17#include <asm/cache.h> 18 19#include "irammap.h" 20#include "reset.h" 21#include "sleep.h" 22 23#define EMC_CFG 0xc 24#define EMC_ADR_CFG 0x10 25#define EMC_NOP 0xdc 26#define EMC_SELF_REF 0xe0 27#define EMC_REQ_CTRL 0x2b0 28#define EMC_EMC_STATUS 0x2b4 29 30#define CLK_RESET_CCLK_BURST 0x20 31#define CLK_RESET_CCLK_DIVIDER 0x24 32#define CLK_RESET_SCLK_BURST 0x28 33#define CLK_RESET_SCLK_DIVIDER 0x2c 34#define CLK_RESET_PLLC_BASE 0x80 35#define CLK_RESET_PLLM_BASE 0x90 36#define CLK_RESET_PLLP_BASE 0xa0 37 38#define APB_MISC_XM2CFGCPADCTRL 0x8c8 39#define APB_MISC_XM2CFGDPADCTRL 0x8cc 40#define APB_MISC_XM2CLKCFGPADCTRL 0x8d0 41#define APB_MISC_XM2COMPPADCTRL 0x8d4 42#define APB_MISC_XM2VTTGENPADCTRL 0x8d8 43#define APB_MISC_XM2CFGCPADCTRL2 0x8e4 44#define APB_MISC_XM2CFGDPADCTRL2 0x8e8 45 46.macro pll_enable, rd, r_car_base, pll_base 47 ldr \rd, [\r_car_base, #\pll_base] 48 tst \rd, #(1 << 30) 49 orreq \rd, \rd, #(1 << 30) 50 streq \rd, [\r_car_base, #\pll_base] 51.endm 52 53.macro emc_device_mask, rd, base 54 ldr \rd, [\base, #EMC_ADR_CFG] 55 tst \rd, #(0x3 << 24) 56 moveq \rd, #(0x1 << 8) @ just 1 device 57 movne \rd, #(0x3 << 8) @ 2 devices 58.endm 59 60#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) 61/* 62 * tegra20_hotplug_shutdown(void) 63 * 64 * puts the current cpu in reset 65 * should never return 66 */ 67ENTRY(tegra20_hotplug_shutdown) 68 /* Put this CPU down */ 69 cpu_id r0 70 bl tegra20_cpu_shutdown 71 ret lr @ should never get here 72ENDPROC(tegra20_hotplug_shutdown) 73 74/* 75 * tegra20_cpu_shutdown(int cpu) 76 * 77 * r0 is cpu to reset 78 * 79 * puts the specified CPU in wait-for-event mode on the flow controller 80 * and puts the CPU in reset 81 * can be called on the current cpu or another cpu 82 * if called on the current cpu, does not return 83 * MUST NOT BE CALLED FOR CPU 0. 84 * 85 * corrupts r0-r3, r12 86 */ 87ENTRY(tegra20_cpu_shutdown) 88 cmp r0, #0 89 reteq lr @ must not be called for CPU 0 90 91 cpu_to_halt_reg r1, r0 92 ldr r3, =TEGRA_FLOW_CTRL_VIRT 93 mov r2, #FLOW_CTRL_WAITEVENT | FLOW_CTRL_JTAG_RESUME 94 str r2, [r3, r1] @ put flow controller in wait event mode 95 ldr r2, [r3, r1] 96 isb 97 dsb 98 movw r1, 0x1011 99 mov r1, r1, lsl r0 100 ldr r3, =TEGRA_CLK_RESET_VIRT 101 str r1, [r3, #0x340] @ put slave CPU in reset 102 isb 103 dsb 104 cpu_id r3 105 cmp r3, r0 106 beq . 107 ret lr 108ENDPROC(tegra20_cpu_shutdown) 109#endif 110 111#ifdef CONFIG_PM_SLEEP 112/* 113 * tegra20_sleep_core_finish(unsigned long v2p) 114 * 115 * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to 116 * tegra20_tear_down_core in IRAM 117 */ 118ENTRY(tegra20_sleep_core_finish) 119 mov r4, r0 120 /* Flush, disable the L1 data cache and exit SMP */ 121 mov r0, #TEGRA_FLUSH_CACHE_ALL 122 bl tegra_disable_clean_inv_dcache 123 mov r0, r4 124 125 mov32 r3, tegra_shut_off_mmu 126 add r3, r3, r0 127 128 mov32 r0, tegra20_tear_down_core 129 mov32 r1, tegra20_iram_start 130 sub r0, r0, r1 131 mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA 132 add r0, r0, r1 133 134 ret r3 135ENDPROC(tegra20_sleep_core_finish) 136 137/* 138 * tegra20_tear_down_cpu 139 * 140 * Switches the CPU cluster to PLL-P and enters sleep. 141 */ 142ENTRY(tegra20_tear_down_cpu) 143 bl tegra_switch_cpu_to_pllp 144 b tegra20_enter_sleep 145ENDPROC(tegra20_tear_down_cpu) 146 147/* START OF ROUTINES COPIED TO IRAM */ 148 .align L1_CACHE_SHIFT 149 .globl tegra20_iram_start 150tegra20_iram_start: 151 152/* 153 * tegra20_lp1_reset 154 * 155 * reset vector for LP1 restore; copied into IRAM during suspend. 156 * Brings the system back up to a safe staring point (SDRAM out of 157 * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLP, 158 * system clock running on the same PLL that it suspended at), and 159 * jumps to tegra_resume to restore virtual addressing and PLLX. 160 * The physical address of tegra_resume expected to be stored in 161 * PMC_SCRATCH41. 162 * 163 * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA. 164 */ 165ENTRY(tegra20_lp1_reset) 166 /* 167 * The CPU and system bus are running at 32KHz and executing from 168 * IRAM when this code is executed; immediately switch to CLKM and 169 * enable PLLM, PLLP, PLLC. 170 */ 171 mov32 r0, TEGRA_CLK_RESET_BASE 172 173 mov r1, #(1 << 28) 174 str r1, [r0, #CLK_RESET_SCLK_BURST] 175 str r1, [r0, #CLK_RESET_CCLK_BURST] 176 mov r1, #0 177 str r1, [r0, #CLK_RESET_CCLK_DIVIDER] 178 str r1, [r0, #CLK_RESET_SCLK_DIVIDER] 179 180 pll_enable r1, r0, CLK_RESET_PLLM_BASE 181 pll_enable r1, r0, CLK_RESET_PLLP_BASE 182 pll_enable r1, r0, CLK_RESET_PLLC_BASE 183 184 adr r2, tegra20_sdram_pad_address 185 adr r4, tegra20_sdram_pad_save 186 mov r5, #0 187 188 ldr r6, tegra20_sdram_pad_size 189padload: 190 ldr r7, [r2, r5] @ r7 is the addr in the pad_address 191 192 ldr r1, [r4, r5] 193 str r1, [r7] @ restore the value in pad_save 194 195 add r5, r5, #4 196 cmp r6, r5 197 bne padload 198 199padload_done: 200 /* 255uS delay for PLL stabilization */ 201 mov32 r7, TEGRA_TMRUS_BASE 202 ldr r1, [r7] 203 add r1, r1, #0xff 204 wait_until r1, r7, r9 205 206 adr r4, tegra20_sclk_save 207 ldr r4, [r4] 208 str r4, [r0, #CLK_RESET_SCLK_BURST] 209 mov32 r4, ((1 << 28) | (4)) @ burst policy is PLLP 210 str r4, [r0, #CLK_RESET_CCLK_BURST] 211 212 mov32 r0, TEGRA_EMC_BASE 213 ldr r1, [r0, #EMC_CFG] 214 bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP 215 str r1, [r0, #EMC_CFG] 216 217 mov r1, #0 218 str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh 219 mov r1, #1 220 str r1, [r0, #EMC_NOP] 221 str r1, [r0, #EMC_NOP] 222 223 emc_device_mask r1, r0 224 225exit_selfrefresh_loop: 226 ldr r2, [r0, #EMC_EMC_STATUS] 227 ands r2, r2, r1 228 bne exit_selfrefresh_loop 229 230 mov r1, #0 @ unstall all transactions 231 str r1, [r0, #EMC_REQ_CTRL] 232 233 mov32 r0, TEGRA_PMC_BASE 234 ldr r0, [r0, #PMC_SCRATCH41] 235 ret r0 @ jump to tegra_resume 236ENDPROC(tegra20_lp1_reset) 237 238/* 239 * tegra20_tear_down_core 240 * 241 * copied into and executed from IRAM 242 * puts memory in self-refresh for LP0 and LP1 243 */ 244tegra20_tear_down_core: 245 bl tegra20_sdram_self_refresh 246 bl tegra20_switch_cpu_to_clk32k 247 b tegra20_enter_sleep 248 249/* 250 * tegra20_switch_cpu_to_clk32k 251 * 252 * In LP0 and LP1 all PLLs will be turned off. Switch the CPU and system clock 253 * to the 32KHz clock. 254 */ 255tegra20_switch_cpu_to_clk32k: 256 /* 257 * start by switching to CLKM to safely disable PLLs, then switch to 258 * CLKS. 259 */ 260 mov r0, #(1 << 28) 261 str r0, [r5, #CLK_RESET_SCLK_BURST] 262 str r0, [r5, #CLK_RESET_CCLK_BURST] 263 mov r0, #0 264 str r0, [r5, #CLK_RESET_CCLK_DIVIDER] 265 str r0, [r5, #CLK_RESET_SCLK_DIVIDER] 266 267 /* 2uS delay delay between changing SCLK and disabling PLLs */ 268 mov32 r7, TEGRA_TMRUS_BASE 269 ldr r1, [r7] 270 add r1, r1, #2 271 wait_until r1, r7, r9 272 273 /* disable PLLM, PLLP and PLLC */ 274 ldr r0, [r5, #CLK_RESET_PLLM_BASE] 275 bic r0, r0, #(1 << 30) 276 str r0, [r5, #CLK_RESET_PLLM_BASE] 277 ldr r0, [r5, #CLK_RESET_PLLP_BASE] 278 bic r0, r0, #(1 << 30) 279 str r0, [r5, #CLK_RESET_PLLP_BASE] 280 ldr r0, [r5, #CLK_RESET_PLLC_BASE] 281 bic r0, r0, #(1 << 30) 282 str r0, [r5, #CLK_RESET_PLLC_BASE] 283 284 /* switch to CLKS */ 285 mov r0, #0 /* brust policy = 32KHz */ 286 str r0, [r5, #CLK_RESET_SCLK_BURST] 287 288 ret lr 289 290/* 291 * tegra20_enter_sleep 292 * 293 * uses flow controller to enter sleep state 294 * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1 295 * executes from SDRAM with target state is LP2 296 */ 297tegra20_enter_sleep: 298 mov32 r6, TEGRA_FLOW_CTRL_BASE 299 300 mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT 301 orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ 302 cpu_id r1 303 cpu_to_halt_reg r1, r1 304 str r0, [r6, r1] 305 dsb 306 ldr r0, [r6, r1] /* memory barrier */ 307 308halted: 309 dsb 310 wfe /* CPU should be power gated here */ 311 isb 312 b halted 313 314/* 315 * tegra20_sdram_self_refresh 316 * 317 * called with MMU off and caches disabled 318 * puts sdram in self refresh 319 * must be executed from IRAM 320 */ 321tegra20_sdram_self_refresh: 322 mov32 r1, TEGRA_EMC_BASE @ r1 reserved for emc base addr 323 324 mov r2, #3 325 str r2, [r1, #EMC_REQ_CTRL] @ stall incoming DRAM requests 326 327emcidle: 328 ldr r2, [r1, #EMC_EMC_STATUS] 329 tst r2, #4 330 beq emcidle 331 332 mov r2, #1 333 str r2, [r1, #EMC_SELF_REF] 334 335 emc_device_mask r2, r1 336 337emcself: 338 ldr r3, [r1, #EMC_EMC_STATUS] 339 and r3, r3, r2 340 cmp r3, r2 341 bne emcself @ loop until DDR in self-refresh 342 343 adr r2, tegra20_sdram_pad_address 344 adr r3, tegra20_sdram_pad_safe 345 adr r4, tegra20_sdram_pad_save 346 mov r5, #0 347 348 ldr r6, tegra20_sdram_pad_size 349padsave: 350 ldr r0, [r2, r5] @ r0 is the addr in the pad_address 351 352 ldr r1, [r0] 353 str r1, [r4, r5] @ save the content of the addr 354 355 ldr r1, [r3, r5] 356 str r1, [r0] @ set the save val to the addr 357 358 add r5, r5, #4 359 cmp r6, r5 360 bne padsave 361padsave_done: 362 363 mov32 r5, TEGRA_CLK_RESET_BASE 364 ldr r0, [r5, #CLK_RESET_SCLK_BURST] 365 adr r2, tegra20_sclk_save 366 str r0, [r2] 367 dsb 368 ret lr 369 370tegra20_sdram_pad_address: 371 .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL 372 .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL 373 .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CLKCFGPADCTRL 374 .word TEGRA_APB_MISC_BASE + APB_MISC_XM2COMPPADCTRL 375 .word TEGRA_APB_MISC_BASE + APB_MISC_XM2VTTGENPADCTRL 376 .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL2 377 .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL2 378 379tegra20_sdram_pad_size: 380 .word tegra20_sdram_pad_size - tegra20_sdram_pad_address 381 382tegra20_sdram_pad_safe: 383 .word 0x8 384 .word 0x8 385 .word 0x0 386 .word 0x8 387 .word 0x5500 388 .word 0x08080040 389 .word 0x0 390 391tegra20_sclk_save: 392 .word 0x0 393 394tegra20_sdram_pad_save: 395 .rept (tegra20_sdram_pad_size - tegra20_sdram_pad_address) / 4 396 .long 0 397 .endr 398 399 .ltorg 400/* dummy symbol for end of IRAM */ 401 .align L1_CACHE_SHIFT 402 .globl tegra20_iram_end 403tegra20_iram_end: 404 b . 405#endif 406