xref: /linux/arch/arm/mach-spear/spear3xx.c (revision 24bce201d79807b668bf9d9e0aca801c5c0d5f78)
1 /*
2  * arch/arm/mach-spear3xx/spear3xx.c
3  *
4  * SPEAr3XX machines common source file
5  *
6  * Copyright (C) 2009-2012 ST Microelectronics
7  * Viresh Kumar <vireshk@kernel.org>
8  *
9  * This file is licensed under the terms of the GNU General Public
10  * License version 2. This program is licensed "as is" without any
11  * warranty of any kind, whether express or implied.
12  */
13 
14 #define pr_fmt(fmt) "SPEAr3xx: " fmt
15 
16 #include <linux/amba/pl022.h>
17 #include <linux/amba/pl080.h>
18 #include <linux/clk.h>
19 #include <linux/io.h>
20 #include <asm/mach/map.h>
21 #include "pl080.h"
22 #include "generic.h"
23 #include "spear.h"
24 #include "misc_regs.h"
25 
26 /* ssp device registration */
27 struct pl022_ssp_controller pl022_plat_data = {
28 	.bus_id = 0,
29 	.enable_dma = 1,
30 	.dma_filter = pl08x_filter_id,
31 	.dma_tx_param = "ssp0_tx",
32 	.dma_rx_param = "ssp0_rx",
33 };
34 
35 /* dmac device registration */
36 struct pl08x_platform_data pl080_plat_data = {
37 	.memcpy_burst_size = PL08X_BURST_SZ_16,
38 	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
39 	.memcpy_prot_buff = true,
40 	.memcpy_prot_cache = true,
41 	.lli_buses = PL08X_AHB1,
42 	.mem_buses = PL08X_AHB1,
43 	.get_xfer_signal = pl080_get_signal,
44 	.put_xfer_signal = pl080_put_signal,
45 };
46 
47 /*
48  * Following will create 16MB static virtual/physical mappings
49  * PHYSICAL		VIRTUAL
50  * 0xD0000000		0xFD000000
51  * 0xFC000000		0xFC000000
52  */
53 struct map_desc spear3xx_io_desc[] __initdata = {
54 	{
55 		.virtual	= (unsigned long)VA_SPEAR_ICM1_2_BASE,
56 		.pfn		= __phys_to_pfn(SPEAR_ICM1_2_BASE),
57 		.length		= SZ_16M,
58 		.type		= MT_DEVICE
59 	}, {
60 		.virtual	= (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE,
61 		.pfn		= __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
62 		.length		= SZ_16M,
63 		.type		= MT_DEVICE
64 	},
65 };
66 
67 /* This will create static memory mapping for selected devices */
68 void __init spear3xx_map_io(void)
69 {
70 	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
71 }
72 
73 void __init spear3xx_timer_init(void)
74 {
75 	char pclk_name[] = "pll3_clk";
76 	struct clk *gpt_clk, *pclk;
77 
78 	spear3xx_clk_init(MISC_BASE, VA_SPEAR320_SOC_CONFIG_BASE);
79 
80 	/* get the system timer clock */
81 	gpt_clk = clk_get_sys("gpt0", NULL);
82 	if (IS_ERR(gpt_clk)) {
83 		pr_err("%s:couldn't get clk for gpt\n", __func__);
84 		BUG();
85 	}
86 
87 	/* get the suitable parent clock for timer*/
88 	pclk = clk_get(NULL, pclk_name);
89 	if (IS_ERR(pclk)) {
90 		pr_err("%s:couldn't get %s as parent for gpt\n",
91 				__func__, pclk_name);
92 		BUG();
93 	}
94 
95 	clk_set_parent(gpt_clk, pclk);
96 	clk_put(gpt_clk);
97 	clk_put(pclk);
98 
99 	spear_setup_of_timer();
100 }
101