xref: /linux/arch/arm/mach-shmobile/smp-r8a7779.c (revision 4b660dbd9ee2059850fd30e0df420ca7a38a1856)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * SMP support for R-Mobile / SH-Mobile - r8a7779 portion
4  *
5  * Copyright (C) 2011  Renesas Solutions Corp.
6  * Copyright (C) 2011  Magnus Damm
7  */
8 #include <linux/kernel.h>
9 #include <linux/init.h>
10 #include <linux/smp.h>
11 #include <linux/spinlock.h>
12 #include <linux/io.h>
13 #include <linux/delay.h>
14 #include <linux/soc/renesas/rcar-sysc.h>
15 
16 #include <asm/cacheflush.h>
17 #include <asm/smp_plat.h>
18 #include <asm/smp_scu.h>
19 
20 #include "common.h"
21 #include "r8a7779.h"
22 
23 #define HPBREG_BASE		0xfe700000
24 #define AVECR			0x0040	/* ARM Reset Vector Address Register */
25 
26 #define R8A7779_SCU_BASE	0xf0000000
27 
28 static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
29 {
30 	int ret = -EIO;
31 
32 	cpu = cpu_logical_map(cpu);
33 	if (cpu)
34 		ret = rcar_sysc_power_up_cpu(cpu);
35 
36 	return ret;
37 }
38 
39 static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
40 {
41 	void __iomem *base;
42 
43 	if (!request_mem_region(0, SZ_4K, "Boot Area")) {
44 		pr_err("Failed to request boot area\n");
45 		return;
46 	}
47 
48 	base = ioremap(HPBREG_BASE, 0x1000);
49 
50 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
51 	writel(__pa(shmobile_boot_vector), base + AVECR);
52 
53 	/* setup r8a7779 specific SCU bits */
54 	shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus);
55 
56 	iounmap(base);
57 }
58 
59 #ifdef CONFIG_HOTPLUG_CPU
60 static int r8a7779_platform_cpu_kill(unsigned int cpu)
61 {
62 	int ret = -EIO;
63 
64 	cpu = cpu_logical_map(cpu);
65 	if (cpu)
66 		ret = rcar_sysc_power_down_cpu(cpu);
67 
68 	return ret ? ret : 1;
69 }
70 
71 static int r8a7779_cpu_kill(unsigned int cpu)
72 {
73 	if (shmobile_smp_scu_cpu_kill(cpu))
74 		return r8a7779_platform_cpu_kill(cpu);
75 
76 	return 0;
77 }
78 #endif /* CONFIG_HOTPLUG_CPU */
79 
80 const struct smp_operations r8a7779_smp_ops  __initconst = {
81 	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
82 	.smp_boot_secondary	= r8a7779_boot_secondary,
83 #ifdef CONFIG_HOTPLUG_CPU
84 	.cpu_die		= shmobile_smp_scu_cpu_die,
85 	.cpu_kill		= r8a7779_cpu_kill,
86 #endif
87 };
88