1 /* 2 * Support for Sharp SL-Cxx00 Series of PDAs 3 * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi) 4 * 5 * Copyright (c) 2005 Richard Purdie 6 * 7 * Based on Sharp's 2.4 kernel patches/lubbock.c 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 */ 14 15 #include <linux/kernel.h> 16 #include <linux/init.h> 17 #include <linux/platform_device.h> 18 #include <linux/delay.h> 19 #include <linux/major.h> 20 #include <linux/fs.h> 21 #include <linux/interrupt.h> 22 #include <linux/gpio.h> 23 #include <linux/leds.h> 24 #include <linux/mmc/host.h> 25 #include <linux/pm.h> 26 #include <linux/backlight.h> 27 #include <linux/io.h> 28 #include <linux/i2c.h> 29 #include <linux/i2c/pca953x.h> 30 #include <linux/spi/spi.h> 31 #include <linux/spi/ads7846.h> 32 #include <linux/spi/corgi_lcd.h> 33 34 #include <asm/setup.h> 35 #include <asm/memory.h> 36 #include <asm/mach-types.h> 37 #include <mach/hardware.h> 38 #include <asm/irq.h> 39 #include <asm/system.h> 40 41 #include <asm/mach/arch.h> 42 #include <asm/mach/map.h> 43 #include <asm/mach/irq.h> 44 45 #include <mach/pxa-regs.h> 46 #include <mach/pxa2xx-regs.h> 47 #include <mach/mfp-pxa27x.h> 48 #include <mach/pxa27x-udc.h> 49 #include <mach/reset.h> 50 #include <mach/i2c.h> 51 #include <mach/irda.h> 52 #include <mach/mmc.h> 53 #include <mach/ohci.h> 54 #include <mach/udc.h> 55 #include <mach/pxafb.h> 56 #include <mach/pxa2xx_spi.h> 57 #include <mach/spitz.h> 58 #include <mach/sharpsl.h> 59 60 #include <asm/mach/sharpsl_param.h> 61 #include <asm/hardware/scoop.h> 62 63 #include "generic.h" 64 #include "devices.h" 65 #include "sharpsl.h" 66 67 static unsigned long spitz_pin_config[] __initdata = { 68 /* Chip Selects */ 69 GPIO78_nCS_2, /* SCOOP #2 */ 70 GPIO80_nCS_4, /* SCOOP #1 */ 71 72 /* LCD - 16bpp Active TFT */ 73 GPIO58_LCD_LDD_0, 74 GPIO59_LCD_LDD_1, 75 GPIO60_LCD_LDD_2, 76 GPIO61_LCD_LDD_3, 77 GPIO62_LCD_LDD_4, 78 GPIO63_LCD_LDD_5, 79 GPIO64_LCD_LDD_6, 80 GPIO65_LCD_LDD_7, 81 GPIO66_LCD_LDD_8, 82 GPIO67_LCD_LDD_9, 83 GPIO68_LCD_LDD_10, 84 GPIO69_LCD_LDD_11, 85 GPIO70_LCD_LDD_12, 86 GPIO71_LCD_LDD_13, 87 GPIO72_LCD_LDD_14, 88 GPIO73_LCD_LDD_15, 89 GPIO74_LCD_FCLK, 90 GPIO75_LCD_LCLK, 91 GPIO76_LCD_PCLK, 92 93 /* PC Card */ 94 GPIO48_nPOE, 95 GPIO49_nPWE, 96 GPIO50_nPIOR, 97 GPIO51_nPIOW, 98 GPIO85_nPCE_1, 99 GPIO54_nPCE_2, 100 GPIO79_PSKTSEL, 101 GPIO55_nPREG, 102 GPIO56_nPWAIT, 103 GPIO57_nIOIS16, 104 105 /* MMC */ 106 GPIO32_MMC_CLK, 107 GPIO112_MMC_CMD, 108 GPIO92_MMC_DAT_0, 109 GPIO109_MMC_DAT_1, 110 GPIO110_MMC_DAT_2, 111 GPIO111_MMC_DAT_3, 112 113 /* GPIOs */ 114 GPIO9_GPIO, /* SPITZ_GPIO_nSD_DETECT */ 115 GPIO81_GPIO, /* SPITZ_GPIO_nSD_WP */ 116 GPIO41_GPIO, /* SPITZ_GPIO_USB_CONNECT */ 117 GPIO37_GPIO, /* SPITZ_GPIO_USB_HOST */ 118 GPIO35_GPIO, /* SPITZ_GPIO_USB_DEVICE */ 119 GPIO22_GPIO, /* SPITZ_GPIO_HSYNC */ 120 GPIO94_GPIO, /* SPITZ_GPIO_CF_CD */ 121 GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */ 122 GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */ 123 124 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, 125 }; 126 127 /* 128 * Spitz SCOOP Device #1 129 */ 130 static struct resource spitz_scoop_resources[] = { 131 [0] = { 132 .start = 0x10800000, 133 .end = 0x10800fff, 134 .flags = IORESOURCE_MEM, 135 }, 136 }; 137 138 static struct scoop_config spitz_scoop_setup = { 139 .io_dir = SPITZ_SCP_IO_DIR, 140 .io_out = SPITZ_SCP_IO_OUT, 141 .suspend_clr = SPITZ_SCP_SUS_CLR, 142 .suspend_set = SPITZ_SCP_SUS_SET, 143 .gpio_base = SPITZ_SCP_GPIO_BASE, 144 }; 145 146 struct platform_device spitzscoop_device = { 147 .name = "sharp-scoop", 148 .id = 0, 149 .dev = { 150 .platform_data = &spitz_scoop_setup, 151 }, 152 .num_resources = ARRAY_SIZE(spitz_scoop_resources), 153 .resource = spitz_scoop_resources, 154 }; 155 156 /* 157 * Spitz SCOOP Device #2 158 */ 159 static struct resource spitz_scoop2_resources[] = { 160 [0] = { 161 .start = 0x08800040, 162 .end = 0x08800fff, 163 .flags = IORESOURCE_MEM, 164 }, 165 }; 166 167 static struct scoop_config spitz_scoop2_setup = { 168 .io_dir = SPITZ_SCP2_IO_DIR, 169 .io_out = SPITZ_SCP2_IO_OUT, 170 .suspend_clr = SPITZ_SCP2_SUS_CLR, 171 .suspend_set = SPITZ_SCP2_SUS_SET, 172 .gpio_base = SPITZ_SCP2_GPIO_BASE, 173 }; 174 175 struct platform_device spitzscoop2_device = { 176 .name = "sharp-scoop", 177 .id = 1, 178 .dev = { 179 .platform_data = &spitz_scoop2_setup, 180 }, 181 .num_resources = ARRAY_SIZE(spitz_scoop2_resources), 182 .resource = spitz_scoop2_resources, 183 }; 184 185 #define SPITZ_PWR_SD 0x01 186 #define SPITZ_PWR_CF 0x02 187 188 /* Power control is shared with between one of the CF slots and SD */ 189 static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) 190 { 191 unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); 192 193 if (new_cpr & 0x0007) { 194 gpio_set_value(SPITZ_GPIO_CF_POWER, 1); 195 if (!(cpr & 0x0002) && !(cpr & 0x0004)) 196 mdelay(5); 197 if (device == SPITZ_PWR_CF) 198 cpr |= 0x0002; 199 if (device == SPITZ_PWR_SD) 200 cpr |= 0x0004; 201 write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); 202 } else { 203 if (device == SPITZ_PWR_CF) 204 cpr &= ~0x0002; 205 if (device == SPITZ_PWR_SD) 206 cpr &= ~0x0004; 207 if (!(cpr & 0x0002) && !(cpr & 0x0004)) { 208 write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000); 209 mdelay(1); 210 gpio_set_value(SPITZ_GPIO_CF_POWER, 0); 211 } else { 212 write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); 213 } 214 } 215 } 216 217 static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) 218 { 219 /* Only need to override behaviour for slot 0 */ 220 if (nr == 0) 221 spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr); 222 else 223 write_scoop_reg(scoop, SCOOP_CPR, cpr); 224 } 225 226 static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { 227 { 228 .dev = &spitzscoop_device.dev, 229 .irq = SPITZ_IRQ_GPIO_CF_IRQ, 230 .cd_irq = SPITZ_IRQ_GPIO_CF_CD, 231 .cd_irq_str = "PCMCIA0 CD", 232 },{ 233 .dev = &spitzscoop2_device.dev, 234 .irq = SPITZ_IRQ_GPIO_CF2_IRQ, 235 .cd_irq = -1, 236 }, 237 }; 238 239 static struct scoop_pcmcia_config spitz_pcmcia_config = { 240 .devs = &spitz_pcmcia_scoop[0], 241 .num_devs = 2, 242 .power_ctrl = spitz_pcmcia_pwr, 243 }; 244 245 EXPORT_SYMBOL(spitzscoop_device); 246 EXPORT_SYMBOL(spitzscoop2_device); 247 248 /* 249 * Spitz Keyboard Device 250 */ 251 static struct platform_device spitzkbd_device = { 252 .name = "spitz-keyboard", 253 .id = -1, 254 }; 255 256 257 /* 258 * Spitz LEDs 259 */ 260 static struct gpio_led spitz_gpio_leds[] = { 261 { 262 .name = "spitz:amber:charge", 263 .default_trigger = "sharpsl-charge", 264 .gpio = SPITZ_GPIO_LED_ORANGE, 265 }, 266 { 267 .name = "spitz:green:hddactivity", 268 .default_trigger = "ide-disk", 269 .gpio = SPITZ_GPIO_LED_GREEN, 270 }, 271 }; 272 273 static struct gpio_led_platform_data spitz_gpio_leds_info = { 274 .leds = spitz_gpio_leds, 275 .num_leds = ARRAY_SIZE(spitz_gpio_leds), 276 }; 277 278 static struct platform_device spitzled_device = { 279 .name = "leds-gpio", 280 .id = -1, 281 .dev = { 282 .platform_data = &spitz_gpio_leds_info, 283 }, 284 }; 285 286 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) 287 static struct pxa2xx_spi_master spitz_spi_info = { 288 .num_chipselect = 3, 289 }; 290 291 static struct ads7846_platform_data spitz_ads7846_info = { 292 .model = 7846, 293 .vref_delay_usecs = 100, 294 .x_plate_ohms = 419, 295 .y_plate_ohms = 486, 296 .gpio_pendown = SPITZ_GPIO_TP_INT, 297 }; 298 299 static void spitz_ads7846_cs(u32 command) 300 { 301 gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT)); 302 } 303 304 static struct pxa2xx_spi_chip spitz_ads7846_chip = { 305 .cs_control = spitz_ads7846_cs, 306 }; 307 308 static void spitz_bl_kick_battery(void) 309 { 310 void (*kick_batt)(void); 311 312 kick_batt = symbol_get(sharpsl_battery_kick); 313 if (kick_batt) { 314 kick_batt(); 315 symbol_put(sharpsl_battery_kick); 316 } 317 } 318 319 static struct corgi_lcd_platform_data spitz_lcdcon_info = { 320 .init_mode = CORGI_LCD_MODE_VGA, 321 .max_intensity = 0x2f, 322 .default_intensity = 0x1f, 323 .limit_mask = 0x0b, 324 .gpio_backlight_cont = SPITZ_GPIO_BACKLIGHT_CONT, 325 .gpio_backlight_on = SPITZ_GPIO_BACKLIGHT_ON, 326 .kick_battery = spitz_bl_kick_battery, 327 }; 328 329 static void spitz_lcdcon_cs(u32 command) 330 { 331 gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT)); 332 } 333 334 static struct pxa2xx_spi_chip spitz_lcdcon_chip = { 335 .cs_control = spitz_lcdcon_cs, 336 }; 337 338 static void spitz_max1111_cs(u32 command) 339 { 340 gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT)); 341 } 342 343 static struct pxa2xx_spi_chip spitz_max1111_chip = { 344 .cs_control = spitz_max1111_cs, 345 }; 346 347 static struct spi_board_info spitz_spi_devices[] = { 348 { 349 .modalias = "ads7846", 350 .max_speed_hz = 1200000, 351 .bus_num = 2, 352 .chip_select = 0, 353 .platform_data = &spitz_ads7846_info, 354 .controller_data= &spitz_ads7846_chip, 355 .irq = gpio_to_irq(SPITZ_GPIO_TP_INT), 356 }, { 357 .modalias = "corgi-lcd", 358 .max_speed_hz = 50000, 359 .bus_num = 2, 360 .chip_select = 1, 361 .platform_data = &spitz_lcdcon_info, 362 .controller_data= &spitz_lcdcon_chip, 363 }, { 364 .modalias = "max1111", 365 .max_speed_hz = 450000, 366 .bus_num = 2, 367 .chip_select = 2, 368 .controller_data= &spitz_max1111_chip, 369 }, 370 }; 371 372 static void __init spitz_init_spi(void) 373 { 374 int err; 375 376 err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS"); 377 if (err) 378 return; 379 380 err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS"); 381 if (err) 382 goto err_free_1; 383 384 err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS"); 385 if (err) 386 goto err_free_2; 387 388 err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1); 389 if (err) 390 goto err_free_3; 391 err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1); 392 if (err) 393 goto err_free_3; 394 err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1); 395 if (err) 396 goto err_free_3; 397 398 if (machine_is_akita()) { 399 spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT; 400 spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON; 401 } 402 403 pxa2xx_set_spi_info(2, &spitz_spi_info); 404 spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); 405 return; 406 407 err_free_3: 408 gpio_free(SPITZ_GPIO_MAX1111_CS); 409 err_free_2: 410 gpio_free(SPITZ_GPIO_LCDCON_CS); 411 err_free_1: 412 gpio_free(SPITZ_GPIO_ADS7846_CS); 413 } 414 #else 415 static inline void spitz_init_spi(void) {} 416 #endif 417 418 /* 419 * MMC/SD Device 420 * 421 * The card detect interrupt isn't debounced so we delay it by 250ms 422 * to give the card a chance to fully insert/eject. 423 */ 424 425 static struct pxamci_platform_data spitz_mci_platform_data; 426 427 static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, void *data) 428 { 429 int err; 430 431 err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT"); 432 if (err) 433 goto err_out; 434 435 err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP"); 436 if (err) 437 goto err_free_1; 438 439 gpio_direction_input(SPITZ_GPIO_nSD_DETECT); 440 gpio_direction_input(SPITZ_GPIO_nSD_WP); 441 442 spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); 443 444 err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, 445 IRQF_DISABLED | IRQF_TRIGGER_RISING | 446 IRQF_TRIGGER_FALLING, 447 "MMC card detect", data); 448 if (err) { 449 pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n", 450 __func__); 451 goto err_free_2; 452 } 453 return 0; 454 455 err_free_2: 456 gpio_free(SPITZ_GPIO_nSD_WP); 457 err_free_1: 458 gpio_free(SPITZ_GPIO_nSD_DETECT); 459 err_out: 460 return err; 461 } 462 463 static void spitz_mci_setpower(struct device *dev, unsigned int vdd) 464 { 465 struct pxamci_platform_data* p_d = dev->platform_data; 466 467 if (( 1 << vdd) & p_d->ocr_mask) 468 spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004); 469 else 470 spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); 471 } 472 473 static int spitz_mci_get_ro(struct device *dev) 474 { 475 return gpio_get_value(SPITZ_GPIO_nSD_WP); 476 } 477 478 static void spitz_mci_exit(struct device *dev, void *data) 479 { 480 free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data); 481 gpio_free(SPITZ_GPIO_nSD_WP); 482 gpio_free(SPITZ_GPIO_nSD_DETECT); 483 } 484 485 static struct pxamci_platform_data spitz_mci_platform_data = { 486 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, 487 .init = spitz_mci_init, 488 .get_ro = spitz_mci_get_ro, 489 .setpower = spitz_mci_setpower, 490 .exit = spitz_mci_exit, 491 }; 492 493 494 /* 495 * USB Host (OHCI) 496 */ 497 static int spitz_ohci_init(struct device *dev) 498 { 499 int err; 500 501 err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST"); 502 if (err) 503 return err; 504 505 /* Only Port 2 is connected 506 * Setup USB Port 2 Output Control Register 507 */ 508 UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; 509 510 return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1); 511 } 512 513 static struct pxaohci_platform_data spitz_ohci_platform_data = { 514 .port_mode = PMM_NPS_MODE, 515 .init = spitz_ohci_init, 516 .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION, 517 .power_budget = 150, 518 }; 519 520 521 /* 522 * Irda 523 */ 524 static int spitz_irda_startup(struct device *dev) 525 { 526 int rc; 527 528 rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on"); 529 if (rc) 530 goto err; 531 532 rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1); 533 if (rc) 534 goto err_dir; 535 536 return 0; 537 538 err_dir: 539 gpio_free(SPITZ_GPIO_IR_ON); 540 err: 541 return rc; 542 } 543 544 static void spitz_irda_shutdown(struct device *dev) 545 { 546 gpio_free(SPITZ_GPIO_IR_ON); 547 } 548 549 static void spitz_irda_transceiver_mode(struct device *dev, int mode) 550 { 551 gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF); 552 pxa2xx_transceiver_mode(dev, mode); 553 } 554 555 #ifdef CONFIG_MACH_AKITA 556 static void akita_irda_transceiver_mode(struct device *dev, int mode) 557 { 558 gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF); 559 pxa2xx_transceiver_mode(dev, mode); 560 } 561 #endif 562 563 static struct pxaficp_platform_data spitz_ficp_platform_data = { 564 .transceiver_cap = IR_SIRMODE | IR_OFF, 565 .transceiver_mode = spitz_irda_transceiver_mode, 566 .startup = spitz_irda_startup, 567 .shutdown = spitz_irda_shutdown, 568 }; 569 570 571 /* 572 * Spitz PXA Framebuffer 573 */ 574 575 static struct pxafb_mode_info spitz_pxafb_modes[] = { 576 { 577 .pixclock = 19231, 578 .xres = 480, 579 .yres = 640, 580 .bpp = 16, 581 .hsync_len = 40, 582 .left_margin = 46, 583 .right_margin = 125, 584 .vsync_len = 3, 585 .upper_margin = 1, 586 .lower_margin = 0, 587 .sync = 0, 588 },{ 589 .pixclock = 134617, 590 .xres = 240, 591 .yres = 320, 592 .bpp = 16, 593 .hsync_len = 20, 594 .left_margin = 20, 595 .right_margin = 46, 596 .vsync_len = 2, 597 .upper_margin = 1, 598 .lower_margin = 0, 599 .sync = 0, 600 }, 601 }; 602 603 static struct pxafb_mach_info spitz_pxafb_info = { 604 .modes = &spitz_pxafb_modes[0], 605 .num_modes = 2, 606 .fixed_modes = 1, 607 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING, 608 }; 609 610 611 static struct platform_device *devices[] __initdata = { 612 &spitzscoop_device, 613 &spitzkbd_device, 614 &spitzled_device, 615 }; 616 617 static void spitz_poweroff(void) 618 { 619 arm_machine_restart('g'); 620 } 621 622 static void spitz_restart(char mode) 623 { 624 /* Bootloader magic for a reboot */ 625 if((MSC0 & 0xffff0000) == 0x7ff00000) 626 MSC0 = (MSC0 & 0xffff) | 0x7ee00000; 627 628 spitz_poweroff(); 629 } 630 631 static void __init common_init(void) 632 { 633 init_gpio_reset(SPITZ_GPIO_ON_RESET, 1); 634 pm_power_off = spitz_poweroff; 635 arm_pm_restart = spitz_restart; 636 637 PMCR = 0x00; 638 639 /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ 640 PCFR |= PCFR_OPDE; 641 642 pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config)); 643 644 spitz_init_spi(); 645 646 platform_add_devices(devices, ARRAY_SIZE(devices)); 647 pxa_set_mci_info(&spitz_mci_platform_data); 648 pxa_set_ohci_info(&spitz_ohci_platform_data); 649 pxa_set_ficp_info(&spitz_ficp_platform_data); 650 set_pxa_fb_info(&spitz_pxafb_info); 651 pxa_set_i2c_info(NULL); 652 } 653 654 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) 655 static void __init spitz_init(void) 656 { 657 platform_scoop_config = &spitz_pcmcia_config; 658 659 common_init(); 660 661 platform_device_register(&spitzscoop2_device); 662 } 663 #endif 664 665 #ifdef CONFIG_MACH_AKITA 666 /* 667 * Akita IO Expander 668 */ 669 static struct pca953x_platform_data akita_ioexp = { 670 .gpio_base = AKITA_IOEXP_GPIO_BASE, 671 }; 672 673 static struct i2c_board_info akita_i2c_board_info[] = { 674 { 675 .type = "max7310", 676 .addr = 0x18, 677 .platform_data = &akita_ioexp, 678 }, 679 }; 680 681 static void __init akita_init(void) 682 { 683 spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; 684 685 /* We just pretend the second element of the array doesn't exist */ 686 spitz_pcmcia_config.num_devs = 1; 687 platform_scoop_config = &spitz_pcmcia_config; 688 689 pxa_set_i2c_info(NULL); 690 i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info)); 691 692 common_init(); 693 } 694 #endif 695 696 static void __init fixup_spitz(struct machine_desc *desc, 697 struct tag *tags, char **cmdline, struct meminfo *mi) 698 { 699 sharpsl_save_param(); 700 mi->nr_banks = 1; 701 mi->bank[0].start = 0xa0000000; 702 mi->bank[0].node = 0; 703 mi->bank[0].size = (64*1024*1024); 704 } 705 706 #ifdef CONFIG_MACH_SPITZ 707 MACHINE_START(SPITZ, "SHARP Spitz") 708 .phys_io = 0x40000000, 709 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, 710 .fixup = fixup_spitz, 711 .map_io = pxa_map_io, 712 .init_irq = pxa27x_init_irq, 713 .init_machine = spitz_init, 714 .timer = &pxa_timer, 715 MACHINE_END 716 #endif 717 718 #ifdef CONFIG_MACH_BORZOI 719 MACHINE_START(BORZOI, "SHARP Borzoi") 720 .phys_io = 0x40000000, 721 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, 722 .fixup = fixup_spitz, 723 .map_io = pxa_map_io, 724 .init_irq = pxa27x_init_irq, 725 .init_machine = spitz_init, 726 .timer = &pxa_timer, 727 MACHINE_END 728 #endif 729 730 #ifdef CONFIG_MACH_AKITA 731 MACHINE_START(AKITA, "SHARP Akita") 732 .phys_io = 0x40000000, 733 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, 734 .fixup = fixup_spitz, 735 .map_io = pxa_map_io, 736 .init_irq = pxa27x_init_irq, 737 .init_machine = akita_init, 738 .timer = &pxa_timer, 739 MACHINE_END 740 #endif 741