1/* 2 * Low-level PXA250/210 sleep/wakeUp support 3 * 4 * Initial SA1110 code: 5 * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> 6 * 7 * Adapted for PXA by Nicolas Pitre: 8 * Copyright (c) 2002 Monta Vista Software, Inc. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License. 12 */ 13 14#include <linux/linkage.h> 15#include <asm/assembler.h> 16#include <mach/hardware.h> 17#include <mach/smemc.h> 18#include <mach/pxa2xx-regs.h> 19 20#define MDREFR_KDIV 0x200a4000 // all banks 21#define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0 22 23 .text 24 25#ifdef CONFIG_PXA3xx 26/* 27 * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4) 28 */ 29ENTRY(pxa3xx_finish_suspend) 30 mov r0, #0x06 @ S2D3C4 mode 31 mcr p14, 0, r0, c7, c0, 0 @ enter sleep 32 3320: b 20b @ waiting for sleep 34#endif /* CONFIG_PXA3xx */ 35 36#ifdef CONFIG_PXA27x 37/* 38 * pxa27x_finish_suspend() 39 * 40 * Forces CPU into sleep state. 41 * 42 * r0 = value for PWRMODE M field for desired sleep state 43 */ 44ENTRY(pxa27x_finish_suspend) 45 @ Put the processor to sleep 46 @ (also workaround for sighting 28071) 47 48 @ prepare value for sleep mode 49 mov r1, r0 @ sleep mode 50 51 @ prepare pointer to physical address 0 (virtual mapping in generic.c) 52 mov r2, #UNCACHED_PHYS_0 53 54 @ prepare SDRAM refresh settings 55 ldr r4, =MDREFR 56 ldr r5, [r4] 57 58 @ enable SDRAM self-refresh mode 59 orr r5, r5, #MDREFR_SLFRSH 60 61 @ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50) 62 ldr r6, =MDREFR_KDIV 63 orr r5, r5, r6 64 65 @ Intel PXA270 Specification Update notes problems sleeping 66 @ with core operating above 91 MHz 67 @ (see Errata 50, ...processor does not exit from sleep...) 68 69 ldr r6, =CCCR 70 ldr r8, [r6] @ keep original value for resume 71 72 ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value 73 mov r0, #0x2 @ prepare value for CLKCFG 74 75 @ align execution to a cache line 76 b pxa_cpu_do_suspend 77#endif 78 79#ifdef CONFIG_PXA25x 80/* 81 * pxa25x_finish_suspend() 82 * 83 * Forces CPU into sleep state. 84 * 85 * r0 = value for PWRMODE M field for desired sleep state 86 */ 87 88ENTRY(pxa25x_finish_suspend) 89 @ prepare value for sleep mode 90 mov r1, r0 @ sleep mode 91 92 @ prepare pointer to physical address 0 (virtual mapping in generic.c) 93 mov r2, #UNCACHED_PHYS_0 94 95 @ prepare SDRAM refresh settings 96 ldr r4, =MDREFR 97 ldr r5, [r4] 98 99 @ enable SDRAM self-refresh mode 100 orr r5, r5, #MDREFR_SLFRSH 101 102 @ Intel PXA255 Specification Update notes problems 103 @ about suspending with PXBus operating above 133MHz 104 @ (see Errata 31, GPIO output signals, ... unpredictable in sleep 105 @ 106 @ We keep the change-down close to the actual suspend on SDRAM 107 @ as possible to eliminate messing about with the refresh clock 108 @ as the system will restore with the original speed settings 109 @ 110 @ Ben Dooks, 13-Sep-2004 111 112 ldr r6, =CCCR 113 ldr r8, [r6] @ keep original value for resume 114 115 @ ensure x1 for run and turbo mode with memory clock 116 bic r7, r8, #CCCR_M_MASK | CCCR_N_MASK 117 orr r7, r7, #(1<<5) | (2<<7) 118 119 @ check that the memory frequency is within limits 120 and r14, r7, #CCCR_L_MASK 121 teq r14, #1 122 bicne r7, r7, #CCCR_L_MASK 123 orrne r7, r7, #1 @@ 99.53MHz 124 125 @ get ready for the change 126 127 @ note, turbo is not preserved over sleep so there is no 128 @ point in preserving it here. we save it on the stack with the 129 @ other CP registers instead. 130 mov r0, #0 131 mcr p14, 0, r0, c6, c0, 0 132 orr r0, r0, #2 @ initiate change bit 133 b pxa_cpu_do_suspend 134#endif 135 136 .ltorg 137 .align 5 138pxa_cpu_do_suspend: 139 140 @ All needed values are now in registers. 141 @ These last instructions should be in cache 142 143 @ initiate the frequency change... 144 str r7, [r6] 145 mcr p14, 0, r0, c6, c0, 0 146 147 @ restore the original cpu speed value for resume 148 str r8, [r6] 149 150 @ need 6 13-MHz cycles before changing PWRMODE 151 @ just set frequency to 91-MHz... 6*91/13 = 42 152 153 mov r0, #42 15410: subs r0, r0, #1 155 bne 10b 156 157 @ Do not reorder... 158 @ Intel PXA270 Specification Update notes problems performing 159 @ external accesses after SDRAM is put in self-refresh mode 160 @ (see Errata 38 ...hangs when entering self-refresh mode) 161 162 @ force address lines low by reading at physical address 0 163 ldr r3, [r2] 164 165 @ put SDRAM into self-refresh 166 str r5, [r4] 167 168 @ enter sleep mode 169 mcr p14, 0, r1, c7, c0, 0 @ PWRMODE 170 17120: b 20b @ loop waiting for sleep 172