1 /* 2 * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> 3 * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com> 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU Lesser General Public License as 7 * published by the Free Software Foundation; either version 2 of the 8 * License, or (at your option) any later version. 9 */ 10 #include <linux/gpio.h> 11 #include <linux/kernel.h> 12 #include <linux/init.h> 13 #include <linux/platform_device.h> 14 #include <linux/irq.h> 15 #include <linux/mtd/physmap.h> 16 #include <linux/mv643xx_eth.h> 17 #include <linux/leds.h> 18 #include <linux/gpio_keys.h> 19 #include <linux/input.h> 20 #include <linux/i2c.h> 21 #include <linux/ata_platform.h> 22 #include <asm/mach-types.h> 23 #include <asm/mach/arch.h> 24 #include "common.h" 25 #include "mpp.h" 26 #include "orion5x.h" 27 28 #define MV2120_NOR_BOOT_BASE 0xf4000000 29 #define MV2120_NOR_BOOT_SIZE SZ_512K 30 31 #define MV2120_GPIO_RTC_IRQ 3 32 #define MV2120_GPIO_KEY_RESET 17 33 #define MV2120_GPIO_KEY_POWER 18 34 #define MV2120_GPIO_POWER_OFF 19 35 36 37 /***************************************************************************** 38 * Ethernet 39 ****************************************************************************/ 40 static struct mv643xx_eth_platform_data mv2120_eth_data = { 41 .phy_addr = MV643XX_ETH_PHY_ADDR(8), 42 }; 43 44 static struct mv_sata_platform_data mv2120_sata_data = { 45 .n_ports = 2, 46 }; 47 48 static struct mtd_partition mv2120_partitions[] = { 49 { 50 .name = "firmware", 51 .size = 0x00080000, 52 .offset = 0, 53 }, 54 }; 55 56 static struct physmap_flash_data mv2120_nor_flash_data = { 57 .width = 1, 58 .parts = mv2120_partitions, 59 .nr_parts = ARRAY_SIZE(mv2120_partitions) 60 }; 61 62 static struct resource mv2120_nor_flash_resource = { 63 .flags = IORESOURCE_MEM, 64 .start = MV2120_NOR_BOOT_BASE, 65 .end = MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1, 66 }; 67 68 static struct platform_device mv2120_nor_flash = { 69 .name = "physmap-flash", 70 .id = 0, 71 .dev = { 72 .platform_data = &mv2120_nor_flash_data, 73 }, 74 .resource = &mv2120_nor_flash_resource, 75 .num_resources = 1, 76 }; 77 78 static struct gpio_keys_button mv2120_buttons[] = { 79 { 80 .code = KEY_RESTART, 81 .gpio = MV2120_GPIO_KEY_RESET, 82 .desc = "reset", 83 .active_low = 1, 84 }, { 85 .code = KEY_POWER, 86 .gpio = MV2120_GPIO_KEY_POWER, 87 .desc = "power", 88 .active_low = 1, 89 }, 90 }; 91 92 static struct gpio_keys_platform_data mv2120_button_data = { 93 .buttons = mv2120_buttons, 94 .nbuttons = ARRAY_SIZE(mv2120_buttons), 95 }; 96 97 static struct platform_device mv2120_button_device = { 98 .name = "gpio-keys", 99 .id = -1, 100 .num_resources = 0, 101 .dev = { 102 .platform_data = &mv2120_button_data, 103 }, 104 }; 105 106 107 /**************************************************************************** 108 * General Setup 109 ****************************************************************************/ 110 static unsigned int mv2120_mpp_modes[] __initdata = { 111 MPP0_GPIO, /* Sys status LED */ 112 MPP1_GPIO, /* Sys error LED */ 113 MPP2_GPIO, /* OverTemp interrupt */ 114 MPP3_GPIO, /* RTC interrupt */ 115 MPP4_GPIO, /* V_LED 5V */ 116 MPP5_GPIO, /* V_LED 3.3V */ 117 MPP6_UNUSED, 118 MPP7_UNUSED, 119 MPP8_GPIO, /* SATA 0 fail LED */ 120 MPP9_GPIO, /* SATA 1 fail LED */ 121 MPP10_UNUSED, 122 MPP11_UNUSED, 123 MPP12_SATA_LED, /* SATA 0 presence */ 124 MPP13_SATA_LED, /* SATA 1 presence */ 125 MPP14_SATA_LED, /* SATA 0 active */ 126 MPP15_SATA_LED, /* SATA 1 active */ 127 MPP16_UNUSED, 128 MPP17_GPIO, /* Reset button */ 129 MPP18_GPIO, /* Power button */ 130 MPP19_GPIO, /* Power off */ 131 0, 132 }; 133 134 static struct i2c_board_info __initdata mv2120_i2c_rtc = { 135 I2C_BOARD_INFO("pcf8563", 0x51), 136 .irq = 0, 137 }; 138 139 static struct gpio_led mv2120_led_pins[] = { 140 { 141 .name = "mv2120:blue:health", 142 .gpio = 0, 143 }, 144 { 145 .name = "mv2120:red:health", 146 .gpio = 1, 147 }, 148 { 149 .name = "mv2120:led:bright", 150 .gpio = 4, 151 .default_trigger = "default-on", 152 }, 153 { 154 .name = "mv2120:led:dimmed", 155 .gpio = 5, 156 }, 157 { 158 .name = "mv2120:red:sata0", 159 .gpio = 8, 160 .active_low = 1, 161 }, 162 { 163 .name = "mv2120:red:sata1", 164 .gpio = 9, 165 .active_low = 1, 166 }, 167 168 }; 169 170 static struct gpio_led_platform_data mv2120_led_data = { 171 .leds = mv2120_led_pins, 172 .num_leds = ARRAY_SIZE(mv2120_led_pins), 173 }; 174 175 static struct platform_device mv2120_leds = { 176 .name = "leds-gpio", 177 .id = -1, 178 .dev = { 179 .platform_data = &mv2120_led_data, 180 } 181 }; 182 183 static void mv2120_power_off(void) 184 { 185 pr_info("%s: triggering power-off...\n", __func__); 186 gpio_set_value(MV2120_GPIO_POWER_OFF, 0); 187 } 188 189 static void __init mv2120_init(void) 190 { 191 /* Setup basic Orion functions. Need to be called early. */ 192 orion5x_init(); 193 194 orion5x_mpp_conf(mv2120_mpp_modes); 195 196 /* 197 * Configure peripherals. 198 */ 199 orion5x_ehci0_init(); 200 orion5x_ehci1_init(); 201 orion5x_eth_init(&mv2120_eth_data); 202 orion5x_i2c_init(); 203 orion5x_sata_init(&mv2120_sata_data); 204 orion5x_uart0_init(); 205 orion5x_xor_init(); 206 207 mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, 208 ORION_MBUS_DEVBUS_BOOT_ATTR, 209 MV2120_NOR_BOOT_BASE, 210 MV2120_NOR_BOOT_SIZE); 211 platform_device_register(&mv2120_nor_flash); 212 213 platform_device_register(&mv2120_button_device); 214 215 if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) { 216 if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0) 217 mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ); 218 else 219 gpio_free(MV2120_GPIO_RTC_IRQ); 220 } 221 i2c_register_board_info(0, &mv2120_i2c_rtc, 1); 222 platform_device_register(&mv2120_leds); 223 224 /* register mv2120 specific power-off method */ 225 if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 || 226 gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0) 227 pr_err("mv2120: failed to setup power-off GPIO\n"); 228 pm_power_off = mv2120_power_off; 229 } 230 231 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */ 232 MACHINE_START(MV2120, "HP Media Vault mv2120") 233 /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ 234 .atag_offset = 0x100, 235 .nr_irqs = ORION5X_NR_IRQS, 236 .init_machine = mv2120_init, 237 .map_io = orion5x_map_io, 238 .init_early = orion5x_init_early, 239 .init_irq = orion5x_init_irq, 240 .init_time = orion5x_timer_init, 241 .fixup = tag_fixup_mem32, 242 .restart = orion5x_restart, 243 MACHINE_END 244