1 /* 2 * OMAP2+ MPU WD_TIMER-specific code 3 * 4 * Copyright (C) 2012 Texas Instruments, Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 */ 11 12 #include <linux/kernel.h> 13 #include <linux/io.h> 14 #include <linux/err.h> 15 16 #include <linux/platform_data/omap-wd-timer.h> 17 18 #include "omap_hwmod.h" 19 #include "omap_device.h" 20 #include "wd_timer.h" 21 #include "common.h" 22 #include "prm.h" 23 #include "soc.h" 24 25 /* 26 * In order to avoid any assumptions from bootloader regarding WDT 27 * settings, WDT module is reset during init. This enables the watchdog 28 * timer. Hence it is required to disable the watchdog after the WDT reset 29 * during init. Otherwise the system would reboot as per the default 30 * watchdog timer registers settings. 31 */ 32 #define OMAP_WDT_WPS 0x34 33 #define OMAP_WDT_SPR 0x48 34 35 int omap2_wd_timer_disable(struct omap_hwmod *oh) 36 { 37 void __iomem *base; 38 39 if (!oh) { 40 pr_err("%s: Could not look up wdtimer_hwmod\n", __func__); 41 return -EINVAL; 42 } 43 44 base = omap_hwmod_get_mpu_rt_va(oh); 45 if (!base) { 46 pr_err("%s: Could not get the base address for %s\n", 47 oh->name, __func__); 48 return -EINVAL; 49 } 50 51 /* sequence required to disable watchdog */ 52 writel_relaxed(0xAAAA, base + OMAP_WDT_SPR); 53 while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10) 54 cpu_relax(); 55 56 writel_relaxed(0x5555, base + OMAP_WDT_SPR); 57 while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10) 58 cpu_relax(); 59 60 return 0; 61 } 62 63 /** 64 * omap2_wdtimer_reset - reset and disable the WDTIMER IP block 65 * @oh: struct omap_hwmod * 66 * 67 * After the WDTIMER IP blocks are reset on OMAP2/3, we must also take 68 * care to execute the special watchdog disable sequence. This is 69 * because the watchdog is re-armed upon OCP softreset. (On OMAP4, 70 * this behavior was apparently changed and the watchdog is no longer 71 * re-armed after an OCP soft-reset.) Returns -ETIMEDOUT if the reset 72 * did not complete, or 0 upon success. 73 * 74 * XXX Most of this code should be moved to the omap_hwmod.c layer 75 * during a normal merge window. omap_hwmod_softreset() should be 76 * renamed to omap_hwmod_set_ocp_softreset(), and omap_hwmod_softreset() 77 * should call the hwmod _ocp_softreset() code. 78 */ 79 int omap2_wd_timer_reset(struct omap_hwmod *oh) 80 { 81 int c = 0; 82 83 /* Write to the SOFTRESET bit */ 84 omap_hwmod_softreset(oh); 85 86 /* Poll on RESETDONE bit */ 87 omap_test_timeout((omap_hwmod_read(oh, 88 oh->class->sysc->syss_offs) 89 & SYSS_RESETDONE_MASK), 90 MAX_MODULE_SOFTRESET_WAIT, c); 91 92 if (oh->class->sysc->srst_udelay) 93 udelay(oh->class->sysc->srst_udelay); 94 95 if (c == MAX_MODULE_SOFTRESET_WAIT) 96 pr_warn("%s: %s: softreset failed (waited %d usec)\n", 97 __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); 98 else 99 pr_debug("%s: %s: softreset in %d usec\n", __func__, 100 oh->name, c); 101 102 return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 103 omap2_wd_timer_disable(oh); 104 } 105