1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * OMAP2+ MPU WD_TIMER-specific code 4 * 5 * Copyright (C) 2012 Texas Instruments, Inc. 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/io.h> 10 #include <linux/err.h> 11 12 #include <linux/platform_data/omap-wd-timer.h> 13 14 #include "omap_hwmod.h" 15 #include "omap_device.h" 16 #include "wd_timer.h" 17 #include "common.h" 18 #include "prm.h" 19 #include "soc.h" 20 21 /* 22 * In order to avoid any assumptions from bootloader regarding WDT 23 * settings, WDT module is reset during init. This enables the watchdog 24 * timer. Hence it is required to disable the watchdog after the WDT reset 25 * during init. Otherwise the system would reboot as per the default 26 * watchdog timer registers settings. 27 */ 28 #define OMAP_WDT_WPS 0x34 29 #define OMAP_WDT_SPR 0x48 30 31 int omap2_wd_timer_disable(struct omap_hwmod *oh) 32 { 33 void __iomem *base; 34 35 if (!oh) { 36 pr_err("%s: Could not look up wdtimer_hwmod\n", __func__); 37 return -EINVAL; 38 } 39 40 base = omap_hwmod_get_mpu_rt_va(oh); 41 if (!base) { 42 pr_err("%s: Could not get the base address for %s\n", 43 oh->name, __func__); 44 return -EINVAL; 45 } 46 47 /* sequence required to disable watchdog */ 48 writel_relaxed(0xAAAA, base + OMAP_WDT_SPR); 49 while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10) 50 cpu_relax(); 51 52 writel_relaxed(0x5555, base + OMAP_WDT_SPR); 53 while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10) 54 cpu_relax(); 55 56 return 0; 57 } 58 59 /** 60 * omap2_wd_timer_reset - reset and disable the WDTIMER IP block 61 * @oh: struct omap_hwmod * 62 * 63 * After the WDTIMER IP blocks are reset on OMAP2/3, we must also take 64 * care to execute the special watchdog disable sequence. This is 65 * because the watchdog is re-armed upon OCP softreset. (On OMAP4, 66 * this behavior was apparently changed and the watchdog is no longer 67 * re-armed after an OCP soft-reset.) Returns -ETIMEDOUT if the reset 68 * did not complete, or 0 upon success. 69 * 70 * XXX Most of this code should be moved to the omap_hwmod.c layer 71 * during a normal merge window. omap_hwmod_softreset() should be 72 * renamed to omap_hwmod_set_ocp_softreset(), and omap_hwmod_softreset() 73 * should call the hwmod _ocp_softreset() code. 74 * 75 * Returns: %0 on success or -errno value on error. 76 */ 77 int omap2_wd_timer_reset(struct omap_hwmod *oh) 78 { 79 int c = 0; 80 81 /* Write to the SOFTRESET bit */ 82 omap_hwmod_softreset(oh); 83 84 /* Poll on RESETDONE bit */ 85 omap_test_timeout((omap_hwmod_read(oh, 86 oh->class->sysc->syss_offs) 87 & SYSS_RESETDONE_MASK), 88 MAX_MODULE_SOFTRESET_WAIT, c); 89 90 if (oh->class->sysc->srst_udelay) 91 udelay(oh->class->sysc->srst_udelay); 92 93 if (c == MAX_MODULE_SOFTRESET_WAIT) 94 pr_warn("%s: %s: softreset failed (waited %d usec)\n", 95 __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); 96 else 97 pr_debug("%s: %s: softreset in %d usec\n", __func__, 98 oh->name, c); 99 100 return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 101 omap2_wd_timer_disable(oh); 102 } 103