1 /* 2 * OMAP4+ Power Management Routines 3 * 4 * Copyright (C) 2010-2013 Texas Instruments, Inc. 5 * Rajendra Nayak <rnayak@ti.com> 6 * Santosh Shilimkar <santosh.shilimkar@ti.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 */ 12 13 #include <linux/pm.h> 14 #include <linux/suspend.h> 15 #include <linux/module.h> 16 #include <linux/list.h> 17 #include <linux/err.h> 18 #include <linux/slab.h> 19 #include <asm/system_misc.h> 20 21 #include "soc.h" 22 #include "common.h" 23 #include "clockdomain.h" 24 #include "powerdomain.h" 25 #include "pm.h" 26 27 struct power_state { 28 struct powerdomain *pwrdm; 29 u32 next_state; 30 #ifdef CONFIG_SUSPEND 31 u32 saved_state; 32 u32 saved_logic_state; 33 #endif 34 struct list_head node; 35 }; 36 37 static LIST_HEAD(pwrst_list); 38 39 #ifdef CONFIG_SUSPEND 40 static int omap4_pm_suspend(void) 41 { 42 struct power_state *pwrst; 43 int state, ret = 0; 44 u32 cpu_id = smp_processor_id(); 45 46 /* Save current powerdomain state */ 47 list_for_each_entry(pwrst, &pwrst_list, node) { 48 pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); 49 pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm); 50 } 51 52 /* Set targeted power domain states by suspend */ 53 list_for_each_entry(pwrst, &pwrst_list, node) { 54 omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); 55 pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF); 56 } 57 58 /* 59 * For MPUSS to hit power domain retention(CSWR or OSWR), 60 * CPU0 and CPU1 power domains need to be in OFF or DORMANT state, 61 * since CPU power domain CSWR is not supported by hardware 62 * Only master CPU follows suspend path. All other CPUs follow 63 * CPU hotplug path in system wide suspend. On OMAP4, CPU power 64 * domain CSWR is not supported by hardware. 65 * More details can be found in OMAP4430 TRM section 4.3.4.2. 66 */ 67 omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF); 68 69 /* Restore next powerdomain state */ 70 list_for_each_entry(pwrst, &pwrst_list, node) { 71 state = pwrdm_read_prev_pwrst(pwrst->pwrdm); 72 if (state > pwrst->next_state) { 73 pr_info("Powerdomain (%s) didn't enter target state %d\n", 74 pwrst->pwrdm->name, pwrst->next_state); 75 ret = -1; 76 } 77 omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); 78 pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state); 79 } 80 if (ret) { 81 pr_crit("Could not enter target state in pm_suspend\n"); 82 /* 83 * OMAP4 chip PM currently works only with certain (newer) 84 * versions of bootloaders. This is due to missing code in the 85 * kernel to properly reset and initialize some devices. 86 * Warn the user about the bootloader version being one of the 87 * possible causes. 88 * http://www.spinics.net/lists/arm-kernel/msg218641.html 89 */ 90 pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n"); 91 } else { 92 pr_info("Successfully put all powerdomains to target state\n"); 93 } 94 95 return 0; 96 } 97 #endif /* CONFIG_SUSPEND */ 98 99 static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) 100 { 101 struct power_state *pwrst; 102 103 if (!pwrdm->pwrsts) 104 return 0; 105 106 /* 107 * Skip CPU0 and CPU1 power domains. CPU1 is programmed 108 * through hotplug path and CPU0 explicitly programmed 109 * further down in the code path 110 */ 111 if (!strncmp(pwrdm->name, "cpu", 3)) 112 return 0; 113 114 pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC); 115 if (!pwrst) 116 return -ENOMEM; 117 118 pwrst->pwrdm = pwrdm; 119 pwrst->next_state = PWRDM_POWER_RET; 120 list_add(&pwrst->node, &pwrst_list); 121 122 return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); 123 } 124 125 /** 126 * omap_default_idle - OMAP4 default ilde routine.' 127 * 128 * Implements OMAP4 memory, IO ordering requirements which can't be addressed 129 * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPU_IDLE and 130 * by secondary CPU with CONFIG_CPU_IDLE. 131 */ 132 static void omap_default_idle(void) 133 { 134 omap_do_wfi(); 135 } 136 137 /** 138 * omap4_init_static_deps - Add OMAP4 static dependencies 139 * 140 * Add needed static clockdomain dependencies on OMAP4 devices. 141 * Return: 0 on success or 'err' on failures 142 */ 143 static inline int omap4_init_static_deps(void) 144 { 145 struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; 146 struct clockdomain *ducati_clkdm, *l3_2_clkdm; 147 int ret = 0; 148 149 if (omap_rev() == OMAP4430_REV_ES1_0) { 150 WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); 151 return -ENODEV; 152 } 153 154 pr_err("Power Management for TI OMAP4.\n"); 155 /* 156 * OMAP4 chip PM currently works only with certain (newer) 157 * versions of bootloaders. This is due to missing code in the 158 * kernel to properly reset and initialize some devices. 159 * http://www.spinics.net/lists/arm-kernel/msg218641.html 160 */ 161 pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n"); 162 163 ret = pwrdm_for_each(pwrdms_setup, NULL); 164 if (ret) { 165 pr_err("Failed to setup powerdomains\n"); 166 return ret; 167 } 168 169 /* 170 * The dynamic dependency between MPUSS -> MEMIF and 171 * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as 172 * expected. The hardware recommendation is to enable static 173 * dependencies for these to avoid system lock ups or random crashes. 174 * The L4 wakeup depedency is added to workaround the OCP sync hardware 175 * BUG with 32K synctimer which lead to incorrect timer value read 176 * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which 177 * are part of L4 wakeup clockdomain. 178 */ 179 mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); 180 emif_clkdm = clkdm_lookup("l3_emif_clkdm"); 181 l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); 182 l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); 183 ducati_clkdm = clkdm_lookup("ducati_clkdm"); 184 if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || 185 (!l3_2_clkdm) || (!ducati_clkdm)) 186 return -EINVAL; 187 188 ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); 189 ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); 190 ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); 191 ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); 192 ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); 193 if (ret) { 194 pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n"); 195 return -EINVAL; 196 } 197 198 return ret; 199 } 200 201 /** 202 * omap4_pm_init - Init routine for OMAP4+ devices 203 * 204 * Initializes all powerdomain and clockdomain target states 205 * and all PRCM settings. 206 * Return: Returns the error code returned by called functions. 207 */ 208 int __init omap4_pm_init(void) 209 { 210 int ret = 0; 211 212 if (omap_rev() == OMAP4430_REV_ES1_0) { 213 WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); 214 return -ENODEV; 215 } 216 217 pr_info("Power Management for TI OMAP4+ devices.\n"); 218 219 ret = pwrdm_for_each(pwrdms_setup, NULL); 220 if (ret) { 221 pr_err("Failed to setup powerdomains.\n"); 222 goto err2; 223 } 224 225 if (cpu_is_omap44xx()) { 226 ret = omap4_init_static_deps(); 227 if (ret) 228 goto err2; 229 } 230 231 ret = omap4_mpuss_init(); 232 if (ret) { 233 pr_err("Failed to initialise OMAP4 MPUSS\n"); 234 goto err2; 235 } 236 237 (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); 238 239 #ifdef CONFIG_SUSPEND 240 omap_pm_suspend = omap4_pm_suspend; 241 #endif 242 243 /* Overwrite the default cpu_do_idle() */ 244 arm_pm_idle = omap_default_idle; 245 246 if (cpu_is_omap44xx()) 247 omap4_idle_init(); 248 249 err2: 250 return ret; 251 } 252