1 /* 2 * OMAP3 Power Management Routines 3 * 4 * Copyright (C) 2006-2008 Nokia Corporation 5 * Tony Lindgren <tony@atomide.com> 6 * Jouni Hogander 7 * 8 * Copyright (C) 2005 Texas Instruments, Inc. 9 * Richard Woodruff <r-woodruff2@ti.com> 10 * 11 * Based on pm.c for omap1 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of the GNU General Public License version 2 as 15 * published by the Free Software Foundation. 16 */ 17 18 #include <linux/pm.h> 19 #include <linux/suspend.h> 20 #include <linux/interrupt.h> 21 #include <linux/module.h> 22 #include <linux/list.h> 23 #include <linux/err.h> 24 #include <linux/gpio.h> 25 26 #include <mach/sram.h> 27 #include <mach/clockdomain.h> 28 #include <mach/powerdomain.h> 29 #include <mach/control.h> 30 #include <mach/serial.h> 31 32 #include "cm.h" 33 #include "cm-regbits-34xx.h" 34 #include "prm-regbits-34xx.h" 35 36 #include "prm.h" 37 #include "pm.h" 38 39 struct power_state { 40 struct powerdomain *pwrdm; 41 u32 next_state; 42 u32 saved_state; 43 struct list_head node; 44 }; 45 46 static LIST_HEAD(pwrst_list); 47 48 static void (*_omap_sram_idle)(u32 *addr, int save_state); 49 50 static struct powerdomain *mpu_pwrdm; 51 52 /* PRCM Interrupt Handler for wakeups */ 53 static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) 54 { 55 u32 wkst, irqstatus_mpu; 56 u32 fclk, iclk; 57 58 /* WKUP */ 59 wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST); 60 if (wkst) { 61 iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN); 62 fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN); 63 cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN); 64 cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN); 65 prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST); 66 while (prm_read_mod_reg(WKUP_MOD, PM_WKST)) 67 cpu_relax(); 68 cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN); 69 cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN); 70 } 71 72 /* CORE */ 73 wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1); 74 if (wkst) { 75 iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1); 76 fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); 77 cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1); 78 cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1); 79 prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1); 80 while (prm_read_mod_reg(CORE_MOD, PM_WKST1)) 81 cpu_relax(); 82 cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1); 83 cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1); 84 } 85 wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3); 86 if (wkst) { 87 iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3); 88 fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3); 89 cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3); 90 cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); 91 prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3); 92 while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3)) 93 cpu_relax(); 94 cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3); 95 cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); 96 } 97 98 /* PER */ 99 wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST); 100 if (wkst) { 101 iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN); 102 fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN); 103 cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN); 104 cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN); 105 prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST); 106 while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST)) 107 cpu_relax(); 108 cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN); 109 cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN); 110 } 111 112 if (omap_rev() > OMAP3430_REV_ES1_0) { 113 /* USBHOST */ 114 wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST); 115 if (wkst) { 116 iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, 117 CM_ICLKEN); 118 fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, 119 CM_FCLKEN); 120 cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, 121 CM_ICLKEN); 122 cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, 123 CM_FCLKEN); 124 prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD, 125 PM_WKST); 126 while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, 127 PM_WKST)) 128 cpu_relax(); 129 cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD, 130 CM_ICLKEN); 131 cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD, 132 CM_FCLKEN); 133 } 134 } 135 136 irqstatus_mpu = prm_read_mod_reg(OCP_MOD, 137 OMAP3_PRM_IRQSTATUS_MPU_OFFSET); 138 prm_write_mod_reg(irqstatus_mpu, OCP_MOD, 139 OMAP3_PRM_IRQSTATUS_MPU_OFFSET); 140 141 while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)) 142 cpu_relax(); 143 144 return IRQ_HANDLED; 145 } 146 147 static void omap_sram_idle(void) 148 { 149 /* Variable to tell what needs to be saved and restored 150 * in omap_sram_idle*/ 151 /* save_state = 0 => Nothing to save and restored */ 152 /* save_state = 1 => Only L1 and logic lost */ 153 /* save_state = 2 => Only L2 lost */ 154 /* save_state = 3 => L1, L2 and logic lost */ 155 int save_state = 0, mpu_next_state; 156 157 if (!_omap_sram_idle) 158 return; 159 160 mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); 161 switch (mpu_next_state) { 162 case PWRDM_POWER_RET: 163 /* No need to save context */ 164 save_state = 0; 165 break; 166 default: 167 /* Invalid state */ 168 printk(KERN_ERR "Invalid mpu state in sram_idle\n"); 169 return; 170 } 171 omap2_gpio_prepare_for_retention(); 172 omap_uart_prepare_idle(0); 173 omap_uart_prepare_idle(1); 174 omap_uart_prepare_idle(2); 175 176 _omap_sram_idle(NULL, save_state); 177 cpu_init(); 178 179 omap_uart_resume_idle(2); 180 omap_uart_resume_idle(1); 181 omap_uart_resume_idle(0); 182 omap2_gpio_resume_after_retention(); 183 } 184 185 /* 186 * Check if functional clocks are enabled before entering 187 * sleep. This function could be behind CONFIG_PM_DEBUG 188 * when all drivers are configuring their sysconfig registers 189 * properly and using their clocks properly. 190 */ 191 static int omap3_fclks_active(void) 192 { 193 u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0, 194 fck_cam = 0, fck_per = 0, fck_usbhost = 0; 195 196 fck_core1 = cm_read_mod_reg(CORE_MOD, 197 CM_FCLKEN1); 198 if (omap_rev() > OMAP3430_REV_ES1_0) { 199 fck_core3 = cm_read_mod_reg(CORE_MOD, 200 OMAP3430ES2_CM_FCLKEN3); 201 fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD, 202 CM_FCLKEN); 203 fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, 204 CM_FCLKEN); 205 } else 206 fck_sgx = cm_read_mod_reg(GFX_MOD, 207 OMAP3430ES2_CM_FCLKEN3); 208 fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD, 209 CM_FCLKEN); 210 fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD, 211 CM_FCLKEN); 212 fck_per = cm_read_mod_reg(OMAP3430_PER_MOD, 213 CM_FCLKEN); 214 215 /* Ignore UART clocks. These are handled by UART core (serial.c) */ 216 fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2); 217 fck_per &= ~OMAP3430_EN_UART3; 218 219 if (fck_core1 | fck_core3 | fck_sgx | fck_dss | 220 fck_cam | fck_per | fck_usbhost) 221 return 1; 222 return 0; 223 } 224 225 static int omap3_can_sleep(void) 226 { 227 if (!omap_uart_can_sleep()) 228 return 0; 229 if (omap3_fclks_active()) 230 return 0; 231 return 1; 232 } 233 234 /* This sets pwrdm state (other than mpu & core. Currently only ON & 235 * RET are supported. Function is assuming that clkdm doesn't have 236 * hw_sup mode enabled. */ 237 static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) 238 { 239 u32 cur_state; 240 int sleep_switch = 0; 241 int ret = 0; 242 243 if (pwrdm == NULL || IS_ERR(pwrdm)) 244 return -EINVAL; 245 246 while (!(pwrdm->pwrsts & (1 << state))) { 247 if (state == PWRDM_POWER_OFF) 248 return ret; 249 state--; 250 } 251 252 cur_state = pwrdm_read_next_pwrst(pwrdm); 253 if (cur_state == state) 254 return ret; 255 256 if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { 257 omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); 258 sleep_switch = 1; 259 pwrdm_wait_transition(pwrdm); 260 } 261 262 ret = pwrdm_set_next_pwrst(pwrdm, state); 263 if (ret) { 264 printk(KERN_ERR "Unable to set state of powerdomain: %s\n", 265 pwrdm->name); 266 goto err; 267 } 268 269 if (sleep_switch) { 270 omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); 271 pwrdm_wait_transition(pwrdm); 272 } 273 274 err: 275 return ret; 276 } 277 278 static void omap3_pm_idle(void) 279 { 280 local_irq_disable(); 281 local_fiq_disable(); 282 283 if (!omap3_can_sleep()) 284 goto out; 285 286 if (omap_irq_pending()) 287 goto out; 288 289 omap_sram_idle(); 290 291 out: 292 local_fiq_enable(); 293 local_irq_enable(); 294 } 295 296 static int omap3_pm_prepare(void) 297 { 298 disable_hlt(); 299 return 0; 300 } 301 302 static int omap3_pm_suspend(void) 303 { 304 struct power_state *pwrst; 305 int state, ret = 0; 306 307 /* Read current next_pwrsts */ 308 list_for_each_entry(pwrst, &pwrst_list, node) 309 pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); 310 /* Set ones wanted by suspend */ 311 list_for_each_entry(pwrst, &pwrst_list, node) { 312 if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) 313 goto restore; 314 if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm)) 315 goto restore; 316 } 317 318 omap_uart_prepare_suspend(); 319 omap_sram_idle(); 320 321 restore: 322 /* Restore next_pwrsts */ 323 list_for_each_entry(pwrst, &pwrst_list, node) { 324 set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); 325 state = pwrdm_read_prev_pwrst(pwrst->pwrdm); 326 if (state > pwrst->next_state) { 327 printk(KERN_INFO "Powerdomain (%s) didn't enter " 328 "target state %d\n", 329 pwrst->pwrdm->name, pwrst->next_state); 330 ret = -1; 331 } 332 } 333 if (ret) 334 printk(KERN_ERR "Could not enter target state in pm_suspend\n"); 335 else 336 printk(KERN_INFO "Successfully put all powerdomains " 337 "to target state\n"); 338 339 return ret; 340 } 341 342 static int omap3_pm_enter(suspend_state_t state) 343 { 344 int ret = 0; 345 346 switch (state) { 347 case PM_SUSPEND_STANDBY: 348 case PM_SUSPEND_MEM: 349 ret = omap3_pm_suspend(); 350 break; 351 default: 352 ret = -EINVAL; 353 } 354 355 return ret; 356 } 357 358 static void omap3_pm_finish(void) 359 { 360 enable_hlt(); 361 } 362 363 static struct platform_suspend_ops omap_pm_ops = { 364 .prepare = omap3_pm_prepare, 365 .enter = omap3_pm_enter, 366 .finish = omap3_pm_finish, 367 .valid = suspend_valid_only_mem, 368 }; 369 370 371 /** 372 * omap3_iva_idle(): ensure IVA is in idle so it can be put into 373 * retention 374 * 375 * In cases where IVA2 is activated by bootcode, it may prevent 376 * full-chip retention or off-mode because it is not idle. This 377 * function forces the IVA2 into idle state so it can go 378 * into retention/off and thus allow full-chip retention/off. 379 * 380 **/ 381 static void __init omap3_iva_idle(void) 382 { 383 /* ensure IVA2 clock is disabled */ 384 cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); 385 386 /* if no clock activity, nothing else to do */ 387 if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) & 388 OMAP3430_CLKACTIVITY_IVA2_MASK)) 389 return; 390 391 /* Reset IVA2 */ 392 prm_write_mod_reg(OMAP3430_RST1_IVA2 | 393 OMAP3430_RST2_IVA2 | 394 OMAP3430_RST3_IVA2, 395 OMAP3430_IVA2_MOD, RM_RSTCTRL); 396 397 /* Enable IVA2 clock */ 398 cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2, 399 OMAP3430_IVA2_MOD, CM_FCLKEN); 400 401 /* Set IVA2 boot mode to 'idle' */ 402 omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, 403 OMAP343X_CONTROL_IVA2_BOOTMOD); 404 405 /* Un-reset IVA2 */ 406 prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL); 407 408 /* Disable IVA2 clock */ 409 cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); 410 411 /* Reset IVA2 */ 412 prm_write_mod_reg(OMAP3430_RST1_IVA2 | 413 OMAP3430_RST2_IVA2 | 414 OMAP3430_RST3_IVA2, 415 OMAP3430_IVA2_MOD, RM_RSTCTRL); 416 } 417 418 static void __init omap3_d2d_idle(void) 419 { 420 u16 mask, padconf; 421 422 /* In a stand alone OMAP3430 where there is not a stacked 423 * modem for the D2D Idle Ack and D2D MStandby must be pulled 424 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and 425 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */ 426 mask = (1 << 4) | (1 << 3); /* pull-up, enabled */ 427 padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY); 428 padconf |= mask; 429 omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY); 430 431 padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK); 432 padconf |= mask; 433 omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK); 434 435 /* reset modem */ 436 prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON | 437 OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST, 438 CORE_MOD, RM_RSTCTRL); 439 prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL); 440 } 441 442 static void __init prcm_setup_regs(void) 443 { 444 /* XXX Reset all wkdeps. This should be done when initializing 445 * powerdomains */ 446 prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP); 447 prm_write_mod_reg(0, MPU_MOD, PM_WKDEP); 448 prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP); 449 prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP); 450 prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP); 451 prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP); 452 if (omap_rev() > OMAP3430_REV_ES1_0) { 453 prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP); 454 prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP); 455 } else 456 prm_write_mod_reg(0, GFX_MOD, PM_WKDEP); 457 458 /* 459 * Enable interface clock autoidle for all modules. 460 * Note that in the long run this should be done by clockfw 461 */ 462 cm_write_mod_reg( 463 OMAP3430_AUTO_MODEM | 464 OMAP3430ES2_AUTO_MMC3 | 465 OMAP3430ES2_AUTO_ICR | 466 OMAP3430_AUTO_AES2 | 467 OMAP3430_AUTO_SHA12 | 468 OMAP3430_AUTO_DES2 | 469 OMAP3430_AUTO_MMC2 | 470 OMAP3430_AUTO_MMC1 | 471 OMAP3430_AUTO_MSPRO | 472 OMAP3430_AUTO_HDQ | 473 OMAP3430_AUTO_MCSPI4 | 474 OMAP3430_AUTO_MCSPI3 | 475 OMAP3430_AUTO_MCSPI2 | 476 OMAP3430_AUTO_MCSPI1 | 477 OMAP3430_AUTO_I2C3 | 478 OMAP3430_AUTO_I2C2 | 479 OMAP3430_AUTO_I2C1 | 480 OMAP3430_AUTO_UART2 | 481 OMAP3430_AUTO_UART1 | 482 OMAP3430_AUTO_GPT11 | 483 OMAP3430_AUTO_GPT10 | 484 OMAP3430_AUTO_MCBSP5 | 485 OMAP3430_AUTO_MCBSP1 | 486 OMAP3430ES1_AUTO_FAC | /* This is es1 only */ 487 OMAP3430_AUTO_MAILBOXES | 488 OMAP3430_AUTO_OMAPCTRL | 489 OMAP3430ES1_AUTO_FSHOSTUSB | 490 OMAP3430_AUTO_HSOTGUSB | 491 OMAP3430_AUTO_SAD2D | 492 OMAP3430_AUTO_SSI, 493 CORE_MOD, CM_AUTOIDLE1); 494 495 cm_write_mod_reg( 496 OMAP3430_AUTO_PKA | 497 OMAP3430_AUTO_AES1 | 498 OMAP3430_AUTO_RNG | 499 OMAP3430_AUTO_SHA11 | 500 OMAP3430_AUTO_DES1, 501 CORE_MOD, CM_AUTOIDLE2); 502 503 if (omap_rev() > OMAP3430_REV_ES1_0) { 504 cm_write_mod_reg( 505 OMAP3430_AUTO_MAD2D | 506 OMAP3430ES2_AUTO_USBTLL, 507 CORE_MOD, CM_AUTOIDLE3); 508 } 509 510 cm_write_mod_reg( 511 OMAP3430_AUTO_WDT2 | 512 OMAP3430_AUTO_WDT1 | 513 OMAP3430_AUTO_GPIO1 | 514 OMAP3430_AUTO_32KSYNC | 515 OMAP3430_AUTO_GPT12 | 516 OMAP3430_AUTO_GPT1 , 517 WKUP_MOD, CM_AUTOIDLE); 518 519 cm_write_mod_reg( 520 OMAP3430_AUTO_DSS, 521 OMAP3430_DSS_MOD, 522 CM_AUTOIDLE); 523 524 cm_write_mod_reg( 525 OMAP3430_AUTO_CAM, 526 OMAP3430_CAM_MOD, 527 CM_AUTOIDLE); 528 529 cm_write_mod_reg( 530 OMAP3430_AUTO_GPIO6 | 531 OMAP3430_AUTO_GPIO5 | 532 OMAP3430_AUTO_GPIO4 | 533 OMAP3430_AUTO_GPIO3 | 534 OMAP3430_AUTO_GPIO2 | 535 OMAP3430_AUTO_WDT3 | 536 OMAP3430_AUTO_UART3 | 537 OMAP3430_AUTO_GPT9 | 538 OMAP3430_AUTO_GPT8 | 539 OMAP3430_AUTO_GPT7 | 540 OMAP3430_AUTO_GPT6 | 541 OMAP3430_AUTO_GPT5 | 542 OMAP3430_AUTO_GPT4 | 543 OMAP3430_AUTO_GPT3 | 544 OMAP3430_AUTO_GPT2 | 545 OMAP3430_AUTO_MCBSP4 | 546 OMAP3430_AUTO_MCBSP3 | 547 OMAP3430_AUTO_MCBSP2, 548 OMAP3430_PER_MOD, 549 CM_AUTOIDLE); 550 551 if (omap_rev() > OMAP3430_REV_ES1_0) { 552 cm_write_mod_reg( 553 OMAP3430ES2_AUTO_USBHOST, 554 OMAP3430ES2_USBHOST_MOD, 555 CM_AUTOIDLE); 556 } 557 558 /* 559 * Set all plls to autoidle. This is needed until autoidle is 560 * enabled by clockfw 561 */ 562 cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT, 563 OMAP3430_IVA2_MOD, CM_AUTOIDLE2); 564 cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT, 565 MPU_MOD, 566 CM_AUTOIDLE2); 567 cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) | 568 (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT), 569 PLL_MOD, 570 CM_AUTOIDLE); 571 cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT, 572 PLL_MOD, 573 CM_AUTOIDLE2); 574 575 /* 576 * Enable control of expternal oscillator through 577 * sys_clkreq. In the long run clock framework should 578 * take care of this. 579 */ 580 prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, 581 1 << OMAP_AUTOEXTCLKMODE_SHIFT, 582 OMAP3430_GR_MOD, 583 OMAP3_PRM_CLKSRC_CTRL_OFFSET); 584 585 /* setup wakup source */ 586 prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 | 587 OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12, 588 WKUP_MOD, PM_WKEN); 589 /* No need to write EN_IO, that is always enabled */ 590 prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 | 591 OMAP3430_EN_GPT12, 592 WKUP_MOD, OMAP3430_PM_MPUGRPSEL); 593 /* For some reason IO doesn't generate wakeup event even if 594 * it is selected to mpu wakeup goup */ 595 prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, 596 OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); 597 598 /* Don't attach IVA interrupts */ 599 prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); 600 prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); 601 prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); 602 prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); 603 604 /* Clear any pending 'reset' flags */ 605 prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); 606 prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); 607 prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); 608 prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); 609 prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); 610 prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); 611 prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); 612 613 /* Clear any pending PRCM interrupts */ 614 prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); 615 616 /* Clear any pending 'reset' flags */ 617 prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); 618 prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); 619 prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); 620 prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); 621 prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); 622 prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); 623 prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); 624 625 /* Clear any pending PRCM interrupts */ 626 prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); 627 628 omap3_iva_idle(); 629 omap3_d2d_idle(); 630 } 631 632 static int __init pwrdms_setup(struct powerdomain *pwrdm) 633 { 634 struct power_state *pwrst; 635 636 if (!pwrdm->pwrsts) 637 return 0; 638 639 pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL); 640 if (!pwrst) 641 return -ENOMEM; 642 pwrst->pwrdm = pwrdm; 643 pwrst->next_state = PWRDM_POWER_RET; 644 list_add(&pwrst->node, &pwrst_list); 645 646 if (pwrdm_has_hdwr_sar(pwrdm)) 647 pwrdm_enable_hdwr_sar(pwrdm); 648 649 return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); 650 } 651 652 /* 653 * Enable hw supervised mode for all clockdomains if it's 654 * supported. Initiate sleep transition for other clockdomains, if 655 * they are not used 656 */ 657 static int __init clkdms_setup(struct clockdomain *clkdm) 658 { 659 if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) 660 omap2_clkdm_allow_idle(clkdm); 661 else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && 662 atomic_read(&clkdm->usecount) == 0) 663 omap2_clkdm_sleep(clkdm); 664 return 0; 665 } 666 667 static int __init omap3_pm_init(void) 668 { 669 struct power_state *pwrst, *tmp; 670 int ret; 671 672 if (!cpu_is_omap34xx()) 673 return -ENODEV; 674 675 printk(KERN_ERR "Power Management for TI OMAP3.\n"); 676 677 /* XXX prcm_setup_regs needs to be before enabling hw 678 * supervised mode for powerdomains */ 679 prcm_setup_regs(); 680 681 ret = request_irq(INT_34XX_PRCM_MPU_IRQ, 682 (irq_handler_t)prcm_interrupt_handler, 683 IRQF_DISABLED, "prcm", NULL); 684 if (ret) { 685 printk(KERN_ERR "request_irq failed to register for 0x%x\n", 686 INT_34XX_PRCM_MPU_IRQ); 687 goto err1; 688 } 689 690 ret = pwrdm_for_each(pwrdms_setup); 691 if (ret) { 692 printk(KERN_ERR "Failed to setup powerdomains\n"); 693 goto err2; 694 } 695 696 (void) clkdm_for_each(clkdms_setup); 697 698 mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); 699 if (mpu_pwrdm == NULL) { 700 printk(KERN_ERR "Failed to get mpu_pwrdm\n"); 701 goto err2; 702 } 703 704 _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, 705 omap34xx_cpu_suspend_sz); 706 707 suspend_set_ops(&omap_pm_ops); 708 709 pm_idle = omap3_pm_idle; 710 711 err1: 712 return ret; 713 err2: 714 free_irq(INT_34XX_PRCM_MPU_IRQ, NULL); 715 list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) { 716 list_del(&pwrst->node); 717 kfree(pwrst); 718 } 719 return ret; 720 } 721 722 late_initcall(omap3_pm_init); 723