1config ARCH_OMAP 2 bool 3 4config ARCH_OMAP2 5 bool "TI OMAP2" 6 depends on ARCH_MULTI_V6 7 select ARCH_OMAP2PLUS 8 select CPU_V6 9 select MULTI_IRQ_HANDLER 10 select SOC_HAS_OMAP2_SDRC 11 12config ARCH_OMAP3 13 bool "TI OMAP3" 14 depends on ARCH_MULTI_V7 15 select ARCH_OMAP2PLUS 16 select ARCH_HAS_OPP 17 select ARM_CPU_SUSPEND if PM 18 select CPU_V7 19 select MULTI_IRQ_HANDLER 20 select OMAP_INTERCONNECT 21 select PM_OPP if PM 22 select PM_RUNTIME if CPU_IDLE 23 select SOC_HAS_OMAP2_SDRC 24 select USB_ARCH_HAS_EHCI if USB_SUPPORT 25 26config ARCH_OMAP4 27 bool "TI OMAP4" 28 depends on ARCH_MULTI_V7 29 select ARCH_OMAP2PLUS 30 select ARCH_HAS_OPP 31 select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP 32 select ARM_CPU_SUSPEND if PM 33 select ARM_ERRATA_720789 34 select ARM_GIC 35 select CACHE_L2X0 36 select CPU_V7 37 select HAVE_ARM_SCU if SMP 38 select HAVE_ARM_TWD if SMP 39 select HAVE_SMP 40 select OMAP_INTERCONNECT 41 select PL310_ERRATA_588369 42 select PL310_ERRATA_727915 43 select PM_OPP if PM 44 select PM_RUNTIME if CPU_IDLE 45 select USB_ARCH_HAS_EHCI if USB_SUPPORT 46 select ARM_ERRATA_754322 47 select ARM_ERRATA_775420 48 49config SOC_OMAP5 50 bool "TI OMAP5" 51 depends on ARCH_MULTI_V7 52 select ARCH_OMAP2PLUS 53 select ARCH_HAS_OPP 54 select ARM_CPU_SUSPEND if PM 55 select ARM_GIC 56 select CPU_V7 57 select HAVE_ARM_SCU if SMP 58 select HAVE_ARM_TWD if LOCAL_TIMERS 59 select HAVE_SMP 60 select HAVE_ARM_ARCH_TIMER 61 select ARM_ERRATA_798181 if SMP 62 63config SOC_AM33XX 64 bool "TI AM33XX" 65 depends on ARCH_MULTI_V7 66 select ARCH_OMAP2PLUS 67 select ARCH_HAS_OPP 68 select ARM_CPU_SUSPEND if PM 69 select CPU_V7 70 select MULTI_IRQ_HANDLER 71 72config SOC_AM43XX 73 bool "TI AM43x" 74 depends on ARCH_MULTI_V7 75 select CPU_V7 76 select ARCH_OMAP2PLUS 77 select ARCH_HAS_OPP 78 select MULTI_IRQ_HANDLER 79 select ARM_GIC 80 select MACH_OMAP_GENERIC 81 82config SOC_DRA7XX 83 bool "TI DRA7XX" 84 depends on ARCH_MULTI_V7 85 select ARCH_OMAP2PLUS 86 select ARCH_HAS_OPP 87 select ARM_CPU_SUSPEND if PM 88 select ARM_GIC 89 select CPU_V7 90 select HAVE_SMP 91 select HAVE_ARM_ARCH_TIMER 92 93config ARCH_OMAP2PLUS 94 bool 95 select ARCH_HAS_BANDGAP 96 select ARCH_HAS_CPUFREQ 97 select ARCH_HAS_HOLES_MEMORYMODEL 98 select ARCH_OMAP 99 select ARCH_REQUIRE_GPIOLIB 100 select CLKSRC_MMIO 101 select COMMON_CLK 102 select GENERIC_CLOCKEVENTS 103 select GENERIC_IRQ_CHIP 104 select MACH_OMAP_GENERIC 105 select OMAP_DM_TIMER 106 select PINCTRL 107 select PROC_DEVICETREE if PROC_FS 108 select SOC_BUS 109 select SPARSE_IRQ 110 select TI_PRIV_EDMA 111 select USE_OF 112 help 113 Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 114 115 116if ARCH_OMAP2PLUS 117 118menu "TI OMAP2/3/4 Specific Features" 119 120config ARCH_OMAP2PLUS_TYPICAL 121 bool "Typical OMAP configuration" 122 default y 123 select AEABI 124 select HIGHMEM 125 select I2C 126 select I2C_OMAP 127 select MENELAUS if ARCH_OMAP2 128 select NEON if CPU_V7 129 select PM_RUNTIME 130 select REGULATOR 131 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 132 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 133 select VFP 134 help 135 Compile a kernel suitable for booting most boards 136 137config SOC_HAS_OMAP2_SDRC 138 bool "OMAP2 SDRAM Controller support" 139 140config SOC_HAS_REALTIME_COUNTER 141 bool "Real time free running counter" 142 depends on SOC_OMAP5 || SOC_DRA7XX 143 default y 144 145comment "OMAP Core Type" 146 depends on ARCH_OMAP2 147 148config SOC_OMAP2420 149 bool "OMAP2420 support" 150 depends on ARCH_OMAP2 151 default y 152 select OMAP_DM_TIMER 153 select SOC_HAS_OMAP2_SDRC 154 155config SOC_OMAP2430 156 bool "OMAP2430 support" 157 depends on ARCH_OMAP2 158 default y 159 select SOC_HAS_OMAP2_SDRC 160 161config SOC_OMAP3430 162 bool "OMAP3430 support" 163 depends on ARCH_OMAP3 164 default y 165 select SOC_HAS_OMAP2_SDRC 166 167config SOC_TI81XX 168 bool "TI81XX support" 169 depends on ARCH_OMAP3 170 default y 171 172config OMAP_PACKAGE_ZAF 173 bool 174 175config OMAP_PACKAGE_ZAC 176 bool 177 178config OMAP_PACKAGE_CBC 179 bool 180 181config OMAP_PACKAGE_CBB 182 bool 183 184config OMAP_PACKAGE_CUS 185 bool 186 187config OMAP_PACKAGE_CBP 188 bool 189 190comment "OMAP Legacy Platform Data Board Type" 191 depends on ARCH_OMAP2PLUS 192 193config MACH_OMAP_GENERIC 194 bool 195 196config MACH_OMAP2_TUSB6010 197 bool 198 depends on ARCH_OMAP2 && SOC_OMAP2420 199 default y if MACH_NOKIA_N8X0 200 201config MACH_OMAP3_BEAGLE 202 bool "OMAP3 BEAGLE board" 203 depends on ARCH_OMAP3 204 default y 205 select OMAP_PACKAGE_CBB 206 207config MACH_DEVKIT8000 208 bool "DEVKIT8000 board" 209 depends on ARCH_OMAP3 210 default y 211 select OMAP_PACKAGE_CUS 212 213config MACH_OMAP_LDP 214 bool "OMAP3 LDP board" 215 depends on ARCH_OMAP3 216 default y 217 select OMAP_PACKAGE_CBB 218 219config MACH_OMAP3530_LV_SOM 220 bool "OMAP3 Logic 3530 LV SOM board" 221 depends on ARCH_OMAP3 222 default y 223 select OMAP_PACKAGE_CBB 224 help 225 Support for the LogicPD OMAP3530 SOM Development kit 226 for full description please see the products webpage at 227 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit 228 229config MACH_OMAP3_TORPEDO 230 bool "OMAP3 Logic 35x Torpedo board" 231 depends on ARCH_OMAP3 232 default y 233 select OMAP_PACKAGE_CBB 234 help 235 Support for the LogicPD OMAP35x Torpedo Development kit 236 for full description please see the products webpage at 237 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit 238 239config MACH_OVERO 240 bool "Gumstix Overo board" 241 depends on ARCH_OMAP3 242 default y 243 select OMAP_PACKAGE_CBB 244 245config MACH_OMAP3517EVM 246 bool "OMAP3517/ AM3517 EVM board" 247 depends on ARCH_OMAP3 248 default y 249 select OMAP_PACKAGE_CBB 250 251config MACH_CRANEBOARD 252 bool "AM3517/05 CRANE board" 253 depends on ARCH_OMAP3 254 select OMAP_PACKAGE_CBB 255 256config MACH_OMAP3_PANDORA 257 bool "OMAP3 Pandora" 258 depends on ARCH_OMAP3 259 default y 260 select OMAP_PACKAGE_CBB 261 select REGULATOR_FIXED_VOLTAGE if REGULATOR 262 263config MACH_TOUCHBOOK 264 bool "OMAP3 Touch Book" 265 depends on ARCH_OMAP3 266 default y 267 select OMAP_PACKAGE_CBB 268 269config MACH_OMAP_3430SDP 270 bool "OMAP 3430 SDP board" 271 depends on ARCH_OMAP3 272 default y 273 select OMAP_PACKAGE_CBB 274 275config MACH_NOKIA_N800 276 bool 277 278config MACH_NOKIA_N810 279 bool 280 281config MACH_NOKIA_N810_WIMAX 282 bool 283 284config MACH_NOKIA_N8X0 285 bool "Nokia N800/N810" 286 depends on SOC_OMAP2420 287 default y 288 select MACH_NOKIA_N800 289 select MACH_NOKIA_N810 290 select MACH_NOKIA_N810_WIMAX 291 select OMAP_PACKAGE_ZAC 292 293config MACH_NOKIA_RX51 294 bool "Nokia N900 (RX-51) phone" 295 depends on ARCH_OMAP3 296 default y 297 select OMAP_PACKAGE_CBB 298 299config MACH_CM_T35 300 bool "CompuLab CM-T35/CM-T3730 modules" 301 depends on ARCH_OMAP3 302 default y 303 select MACH_CM_T3730 304 select OMAP_PACKAGE_CUS 305 306config MACH_CM_T3517 307 bool "CompuLab CM-T3517 module" 308 depends on ARCH_OMAP3 309 default y 310 select OMAP_PACKAGE_CBB 311 312config MACH_CM_T3730 313 bool 314 315config MACH_SBC3530 316 bool "OMAP3 SBC STALKER board" 317 depends on ARCH_OMAP3 318 default y 319 select OMAP_PACKAGE_CUS 320 321config MACH_TI8168EVM 322 bool "TI8168 Evaluation Module" 323 depends on SOC_TI81XX 324 default y 325 326config MACH_TI8148EVM 327 bool "TI8148 Evaluation Module" 328 depends on SOC_TI81XX 329 default y 330 331config OMAP3_EMU 332 bool "OMAP3 debugging peripherals" 333 depends on ARCH_OMAP3 334 select ARM_AMBA 335 select OC_ETM 336 help 337 Say Y here to enable debugging hardware of omap3 338 339config OMAP3_SDRC_AC_TIMING 340 bool "Enable SDRC AC timing register changes" 341 depends on ARCH_OMAP3 342 default n 343 help 344 If you know that none of your system initiators will attempt to 345 access SDRAM during CORE DVFS, select Y here. This should boost 346 SDRAM performance at lower CORE OPPs. There are relatively few 347 users who will wish to say yes at this point - almost everyone will 348 wish to say no. Selecting yes without understanding what is 349 going on could result in system crashes; 350 351config OMAP4_ERRATA_I688 352 bool "OMAP4 errata: Async Bridge Corruption" 353 depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM 354 select ARCH_HAS_BARRIERS 355 help 356 If a data is stalled inside asynchronous bridge because of back 357 pressure, it may be accepted multiple times, creating pointer 358 misalignment that will corrupt next transfers on that data path 359 until next reset of the system (No recovery procedure once the 360 issue is hit, the path remains consistently broken). Async bridge 361 can be found on path between MPU to EMIF and MPU to L3 interconnect. 362 This situation can happen only when the idle is initiated by a 363 Master Request Disconnection (which is trigged by software when 364 executing WFI on CPU). 365 The work-around for this errata needs all the initiators connected 366 through async bridge must ensure that data path is properly drained 367 before issuing WFI. This condition will be met if one Strongly ordered 368 access is performed to the target right before executing the WFI. 369 In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. 370 IO barrier ensure that there is no synchronisation loss on initiators 371 operating on both interconnect port simultaneously. 372endmenu 373 374endif 375