1menu "TI OMAP/AM/DM/DRA Family" 2 depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 3 4config ARCH_OMAP2 5 bool "TI OMAP2" 6 depends on ARCH_MULTI_V6 7 select ARCH_OMAP2PLUS 8 select CPU_V6 9 select SOC_HAS_OMAP2_SDRC 10 11config ARCH_OMAP3 12 bool "TI OMAP3" 13 depends on ARCH_MULTI_V7 14 select ARCH_OMAP2PLUS 15 select ARM_CPU_SUSPEND if PM 16 select OMAP_INTERCONNECT 17 select PM_OPP if PM 18 select PM_RUNTIME if CPU_IDLE 19 select SOC_HAS_OMAP2_SDRC 20 21config ARCH_OMAP4 22 bool "TI OMAP4" 23 depends on ARCH_MULTI_V7 24 select ARCH_OMAP2PLUS 25 select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP 26 select ARM_CPU_SUSPEND if PM 27 select ARM_ERRATA_720789 28 select ARM_GIC 29 select HAVE_ARM_SCU if SMP 30 select HAVE_ARM_TWD if SMP 31 select OMAP_INTERCONNECT 32 select PL310_ERRATA_588369 if CACHE_L2X0 33 select PL310_ERRATA_727915 if CACHE_L2X0 34 select PM_OPP if PM 35 select PM_RUNTIME if CPU_IDLE 36 select ARM_ERRATA_754322 37 select ARM_ERRATA_775420 38 39config SOC_OMAP5 40 bool "TI OMAP5" 41 depends on ARCH_MULTI_V7 42 select ARCH_OMAP2PLUS 43 select ARM_CPU_SUSPEND if PM 44 select ARM_GIC 45 select HAVE_ARM_SCU if SMP 46 select HAVE_ARM_TWD if SMP 47 select HAVE_ARM_ARCH_TIMER 48 select ARM_ERRATA_798181 if SMP 49 50config SOC_AM33XX 51 bool "TI AM33XX" 52 depends on ARCH_MULTI_V7 53 select ARCH_OMAP2PLUS 54 select ARM_CPU_SUSPEND if PM 55 56config SOC_AM43XX 57 bool "TI AM43x" 58 depends on ARCH_MULTI_V7 59 select ARCH_OMAP2PLUS 60 select ARM_GIC 61 select MACH_OMAP_GENERIC 62 select MIGHT_HAVE_CACHE_L2X0 63 64config SOC_DRA7XX 65 bool "TI DRA7XX" 66 depends on ARCH_MULTI_V7 67 select ARCH_OMAP2PLUS 68 select ARM_CPU_SUSPEND if PM 69 select ARM_GIC 70 select HAVE_ARM_ARCH_TIMER 71 select IRQ_CROSSBAR 72 73config ARCH_OMAP2PLUS 74 bool 75 select ARCH_HAS_BANDGAP 76 select ARCH_HAS_HOLES_MEMORYMODEL 77 select ARCH_OMAP 78 select ARCH_REQUIRE_GPIOLIB 79 select CLKSRC_MMIO 80 select GENERIC_IRQ_CHIP 81 select MACH_OMAP_GENERIC 82 select MEMORY 83 select OMAP_DM_TIMER 84 select OMAP_GPMC 85 select PINCTRL 86 select SOC_BUS 87 select TI_PRIV_EDMA 88 select OMAP_IRQCHIP 89 help 90 Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 91 92 93if ARCH_OMAP2PLUS 94 95menu "TI OMAP2/3/4 Specific Features" 96 97config ARCH_OMAP2PLUS_TYPICAL 98 bool "Typical OMAP configuration" 99 default y 100 select AEABI 101 select HIGHMEM 102 select I2C 103 select I2C_OMAP 104 select MENELAUS if ARCH_OMAP2 105 select NEON if CPU_V7 106 select PM_RUNTIME 107 select REGULATOR 108 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 109 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 110 select VFP 111 help 112 Compile a kernel suitable for booting most boards 113 114config SOC_HAS_OMAP2_SDRC 115 bool "OMAP2 SDRAM Controller support" 116 117config SOC_HAS_REALTIME_COUNTER 118 bool "Real time free running counter" 119 depends on SOC_OMAP5 || SOC_DRA7XX 120 default y 121 122comment "OMAP Core Type" 123 depends on ARCH_OMAP2 124 125config SOC_OMAP2420 126 bool "OMAP2420 support" 127 depends on ARCH_OMAP2 128 default y 129 select OMAP_DM_TIMER 130 select SOC_HAS_OMAP2_SDRC 131 132config SOC_OMAP2430 133 bool "OMAP2430 support" 134 depends on ARCH_OMAP2 135 default y 136 select SOC_HAS_OMAP2_SDRC 137 138config SOC_OMAP3430 139 bool "OMAP3430 support" 140 depends on ARCH_OMAP3 141 default y 142 select SOC_HAS_OMAP2_SDRC 143 144config SOC_TI81XX 145 bool "TI81XX support" 146 depends on ARCH_OMAP3 147 default y 148 149config OMAP_PACKAGE_CBC 150 bool 151 152config OMAP_PACKAGE_CBB 153 bool 154 155config OMAP_PACKAGE_CUS 156 bool 157 158config OMAP_PACKAGE_CBP 159 bool 160 161comment "OMAP Legacy Platform Data Board Type" 162 depends on ARCH_OMAP2PLUS 163 164config MACH_OMAP_GENERIC 165 bool 166 167config MACH_OMAP2_TUSB6010 168 bool 169 depends on ARCH_OMAP2 && SOC_OMAP2420 170 default y if MACH_NOKIA_N8X0 171 172config MACH_OMAP3_BEAGLE 173 bool "OMAP3 BEAGLE board" 174 depends on ARCH_OMAP3 175 default y 176 select OMAP_PACKAGE_CBB 177 178config MACH_DEVKIT8000 179 bool "DEVKIT8000 board" 180 depends on ARCH_OMAP3 181 default y 182 select OMAP_PACKAGE_CUS 183 184config MACH_OMAP_LDP 185 bool "OMAP3 LDP board" 186 depends on ARCH_OMAP3 187 default y 188 select OMAP_PACKAGE_CBB 189 190config MACH_OMAP3530_LV_SOM 191 bool "OMAP3 Logic 3530 LV SOM board" 192 depends on ARCH_OMAP3 193 default y 194 select OMAP_PACKAGE_CBB 195 help 196 Support for the LogicPD OMAP3530 SOM Development kit 197 for full description please see the products webpage at 198 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit 199 200config MACH_OMAP3_TORPEDO 201 bool "OMAP3 Logic 35x Torpedo board" 202 depends on ARCH_OMAP3 203 default y 204 select OMAP_PACKAGE_CBB 205 help 206 Support for the LogicPD OMAP35x Torpedo Development kit 207 for full description please see the products webpage at 208 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit 209 210config MACH_OVERO 211 bool "Gumstix Overo board" 212 depends on ARCH_OMAP3 213 default y 214 select OMAP_PACKAGE_CBB 215 216config MACH_OMAP3517EVM 217 bool "OMAP3517/ AM3517 EVM board" 218 depends on ARCH_OMAP3 219 default y 220 select OMAP_PACKAGE_CBB 221 222config MACH_CRANEBOARD 223 bool "AM3517/05 CRANE board" 224 depends on ARCH_OMAP3 225 select OMAP_PACKAGE_CBB 226 227config MACH_OMAP3_PANDORA 228 bool "OMAP3 Pandora" 229 depends on ARCH_OMAP3 230 default y 231 select OMAP_PACKAGE_CBB 232 select REGULATOR_FIXED_VOLTAGE if REGULATOR 233 234config MACH_TOUCHBOOK 235 bool "OMAP3 Touch Book" 236 depends on ARCH_OMAP3 237 default y 238 select OMAP_PACKAGE_CBB 239 240config MACH_OMAP_3430SDP 241 bool "OMAP 3430 SDP board" 242 depends on ARCH_OMAP3 243 default y 244 select OMAP_PACKAGE_CBB 245 246config MACH_NOKIA_N810 247 bool 248 249config MACH_NOKIA_N810_WIMAX 250 bool 251 252config MACH_NOKIA_N8X0 253 bool "Nokia N800/N810" 254 depends on SOC_OMAP2420 255 default y 256 select MACH_NOKIA_N810 257 select MACH_NOKIA_N810_WIMAX 258 259config MACH_NOKIA_RX51 260 bool "Nokia N900 (RX-51) phone" 261 depends on ARCH_OMAP3 262 default y 263 select OMAP_PACKAGE_CBB 264 265config MACH_CM_T35 266 bool "CompuLab CM-T35/CM-T3730 modules" 267 depends on ARCH_OMAP3 268 default y 269 select MACH_CM_T3730 270 select OMAP_PACKAGE_CUS 271 272config MACH_CM_T3517 273 bool "CompuLab CM-T3517 module" 274 depends on ARCH_OMAP3 275 default y 276 select OMAP_PACKAGE_CBB 277 278config MACH_CM_T3730 279 bool 280 281config MACH_SBC3530 282 bool "OMAP3 SBC STALKER board" 283 depends on ARCH_OMAP3 284 default y 285 select OMAP_PACKAGE_CUS 286 287config MACH_TI8168EVM 288 bool "TI8168 Evaluation Module" 289 depends on SOC_TI81XX 290 default y 291 292config MACH_TI8148EVM 293 bool "TI8148 Evaluation Module" 294 depends on SOC_TI81XX 295 default y 296 297config OMAP3_EMU 298 bool "OMAP3 debugging peripherals" 299 depends on ARCH_OMAP3 300 select ARM_AMBA 301 select OC_ETM 302 help 303 Say Y here to enable debugging hardware of omap3 304 305config OMAP3_SDRC_AC_TIMING 306 bool "Enable SDRC AC timing register changes" 307 depends on ARCH_OMAP3 308 default n 309 help 310 If you know that none of your system initiators will attempt to 311 access SDRAM during CORE DVFS, select Y here. This should boost 312 SDRAM performance at lower CORE OPPs. There are relatively few 313 users who will wish to say yes at this point - almost everyone will 314 wish to say no. Selecting yes without understanding what is 315 going on could result in system crashes; 316 317config OMAP4_ERRATA_I688 318 bool "OMAP4 errata: Async Bridge Corruption" 319 depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM 320 select ARCH_HAS_BARRIERS 321 help 322 If a data is stalled inside asynchronous bridge because of back 323 pressure, it may be accepted multiple times, creating pointer 324 misalignment that will corrupt next transfers on that data path 325 until next reset of the system (No recovery procedure once the 326 issue is hit, the path remains consistently broken). Async bridge 327 can be found on path between MPU to EMIF and MPU to L3 interconnect. 328 This situation can happen only when the idle is initiated by a 329 Master Request Disconnection (which is trigged by software when 330 executing WFI on CPU). 331 The work-around for this errata needs all the initiators connected 332 through async bridge must ensure that data path is properly drained 333 before issuing WFI. This condition will be met if one Strongly ordered 334 access is performed to the target right before executing the WFI. 335 In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. 336 IO barrier ensure that there is no synchronisation loss on initiators 337 operating on both interconnect port simultaneously. 338endmenu 339 340endif 341 342endmenu 343