xref: /linux/arch/arm/mach-omap1/time.c (revision 0b8061c340b643e01da431dd60c75a41bb1d31ec)
1 /*
2  * linux/arch/arm/mach-omap1/time.c
3  *
4  * OMAP Timers
5  *
6  * Copyright (C) 2004 Nokia Corporation
7  * Partial timer rewrite and additional dynamic tick timer support by
8  * Tony Lindgen <tony@atomide.com> and
9  * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
10  *
11  * MPU timer code based on the older MPU timer code for OMAP
12  * Copyright (C) 2000 RidgeRun, Inc.
13  * Author: Greg Lonnon <glonnon@ridgerun.com>
14  *
15  * This program is free software; you can redistribute it and/or modify it
16  * under the terms of the GNU General Public License as published by the
17  * Free Software Foundation; either version 2 of the License, or (at your
18  * option) any later version.
19  *
20  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
22  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
23  * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
26  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
27  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
29  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30  *
31  * You should have received a copy of the  GNU General Public License along
32  * with this program; if not, write  to the Free Software Foundation, Inc.,
33  * 675 Mass Ave, Cambridge, MA 02139, USA.
34  */
35 
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/delay.h>
39 #include <linux/interrupt.h>
40 #include <linux/spinlock.h>
41 #include <linux/clk.h>
42 #include <linux/err.h>
43 #include <linux/clocksource.h>
44 #include <linux/clockchips.h>
45 #include <linux/io.h>
46 #include <linux/sched_clock.h>
47 
48 #include <asm/irq.h>
49 
50 #include <mach/hardware.h>
51 #include <asm/mach/irq.h>
52 #include <asm/mach/time.h>
53 
54 #include "iomap.h"
55 #include "common.h"
56 
57 #ifdef CONFIG_OMAP_MPU_TIMER
58 
59 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
60 #define OMAP_MPU_TIMER_OFFSET		0x100
61 
62 typedef struct {
63 	u32 cntl;			/* CNTL_TIMER, R/W */
64 	u32 load_tim;			/* LOAD_TIM,   W */
65 	u32 read_tim;			/* READ_TIM,   R */
66 } omap_mpu_timer_regs_t;
67 
68 #define omap_mpu_timer_base(n)							\
69 ((omap_mpu_timer_regs_t __iomem *)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
70 				 (n)*OMAP_MPU_TIMER_OFFSET))
71 
72 static inline unsigned long notrace omap_mpu_timer_read(int nr)
73 {
74 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
75 	return readl(&timer->read_tim);
76 }
77 
78 static inline void omap_mpu_set_autoreset(int nr)
79 {
80 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
81 
82 	writel(readl(&timer->cntl) | MPU_TIMER_AR, &timer->cntl);
83 }
84 
85 static inline void omap_mpu_remove_autoreset(int nr)
86 {
87 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
88 
89 	writel(readl(&timer->cntl) & ~MPU_TIMER_AR, &timer->cntl);
90 }
91 
92 static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
93 					int autoreset)
94 {
95 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
96 	unsigned int timerflags = MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST;
97 
98 	if (autoreset)
99 		timerflags |= MPU_TIMER_AR;
100 
101 	writel(MPU_TIMER_CLOCK_ENABLE, &timer->cntl);
102 	udelay(1);
103 	writel(load_val, &timer->load_tim);
104         udelay(1);
105 	writel(timerflags, &timer->cntl);
106 }
107 
108 static inline void omap_mpu_timer_stop(int nr)
109 {
110 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
111 
112 	writel(readl(&timer->cntl) & ~MPU_TIMER_ST, &timer->cntl);
113 }
114 
115 /*
116  * ---------------------------------------------------------------------------
117  * MPU timer 1 ... count down to zero, interrupt, reload
118  * ---------------------------------------------------------------------------
119  */
120 static int omap_mpu_set_next_event(unsigned long cycles,
121 				   struct clock_event_device *evt)
122 {
123 	omap_mpu_timer_start(0, cycles, 0);
124 	return 0;
125 }
126 
127 static int omap_mpu_set_oneshot(struct clock_event_device *evt)
128 {
129 	omap_mpu_timer_stop(0);
130 	omap_mpu_remove_autoreset(0);
131 	return 0;
132 }
133 
134 static int omap_mpu_set_periodic(struct clock_event_device *evt)
135 {
136 	omap_mpu_set_autoreset(0);
137 	return 0;
138 }
139 
140 static struct clock_event_device clockevent_mpu_timer1 = {
141 	.name			= "mpu_timer1",
142 	.features		= CLOCK_EVT_FEAT_PERIODIC |
143 				  CLOCK_EVT_FEAT_ONESHOT,
144 	.set_next_event		= omap_mpu_set_next_event,
145 	.set_state_periodic	= omap_mpu_set_periodic,
146 	.set_state_oneshot	= omap_mpu_set_oneshot,
147 };
148 
149 static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
150 {
151 	struct clock_event_device *evt = &clockevent_mpu_timer1;
152 
153 	evt->event_handler(evt);
154 
155 	return IRQ_HANDLED;
156 }
157 
158 static __init void omap_init_mpu_timer(unsigned long rate)
159 {
160 	if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
161 			IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
162 		pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);
163 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
164 
165 	clockevent_mpu_timer1.cpumask = cpumask_of(0);
166 	clockevents_config_and_register(&clockevent_mpu_timer1, rate,
167 					1, -1);
168 }
169 
170 
171 /*
172  * ---------------------------------------------------------------------------
173  * MPU timer 2 ... free running 32-bit clock source and scheduler clock
174  * ---------------------------------------------------------------------------
175  */
176 
177 static u64 notrace omap_mpu_read_sched_clock(void)
178 {
179 	return ~omap_mpu_timer_read(1);
180 }
181 
182 static void __init omap_init_clocksource(unsigned long rate)
183 {
184 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(1);
185 	static char err[] __initdata = KERN_ERR
186 			"%s: can't register clocksource!\n";
187 
188 	omap_mpu_timer_start(1, ~0, 1);
189 	sched_clock_register(omap_mpu_read_sched_clock, 32, rate);
190 
191 	if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
192 			300, 32, clocksource_mmio_readl_down))
193 		printk(err, "mpu_timer2");
194 }
195 
196 static void __init omap_mpu_timer_init(void)
197 {
198 	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
199 	unsigned long	rate;
200 
201 	BUG_ON(IS_ERR(ck_ref));
202 
203 	rate = clk_get_rate(ck_ref);
204 	clk_put(ck_ref);
205 
206 	/* PTV = 0 */
207 	rate /= 2;
208 
209 	omap_init_mpu_timer(rate);
210 	omap_init_clocksource(rate);
211 }
212 
213 #else
214 static inline void omap_mpu_timer_init(void)
215 {
216 	pr_err("Bogus timer, should not happen\n");
217 }
218 #endif	/* CONFIG_OMAP_MPU_TIMER */
219 
220 /*
221  * ---------------------------------------------------------------------------
222  * Timer initialization
223  * ---------------------------------------------------------------------------
224  */
225 void __init omap1_timer_init(void)
226 {
227 	if (omap_32k_timer_init() != 0)
228 		omap_mpu_timer_init();
229 }
230