1 /* 2 * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c 3 * 4 * Buffalo WXL (Terastation Duo) Setup routines 5 * 6 * sebastien requiem <sebastien@requiem.fr> 7 * 8 * This file is licensed under the terms of the GNU General Public 9 * License version 2. This program is licensed "as is" without any 10 * warranty of any kind, whether express or implied. 11 */ 12 13 #include <linux/kernel.h> 14 #include <linux/init.h> 15 #include <linux/platform_device.h> 16 #include <linux/ata_platform.h> 17 #include <linux/mv643xx_eth.h> 18 #include <linux/ethtool.h> 19 #include <linux/i2c.h> 20 #include <mach/mv78xx0.h> 21 #include <asm/mach-types.h> 22 #include <asm/mach/arch.h> 23 #include "common.h" 24 #include "mpp.h" 25 26 27 /* This arch has 2 Giga Ethernet */ 28 29 static struct mv643xx_eth_platform_data db78x00_ge00_data = { 30 .phy_addr = MV643XX_ETH_PHY_ADDR(0), 31 }; 32 33 static struct mv643xx_eth_platform_data db78x00_ge01_data = { 34 .phy_addr = MV643XX_ETH_PHY_ADDR(8), 35 }; 36 37 38 /* 2 SATA controller supporting HotPlug */ 39 40 static struct mv_sata_platform_data db78x00_sata_data = { 41 .n_ports = 2, 42 }; 43 44 static struct i2c_board_info __initdata db78x00_i2c_rtc = { 45 I2C_BOARD_INFO("ds1338", 0x68), 46 }; 47 48 49 static unsigned int wxl_mpp_config[] __initdata = { 50 MPP0_GE1_TXCLK, 51 MPP1_GE1_TXCTL, 52 MPP2_GE1_RXCTL, 53 MPP3_GE1_RXCLK, 54 MPP4_GE1_TXD0, 55 MPP5_GE1_TXD1, 56 MPP6_GE1_TXD2, 57 MPP7_GE1_TXD3, 58 MPP8_GE1_RXD0, 59 MPP9_GE1_RXD1, 60 MPP10_GE1_RXD2, 61 MPP11_GE1_RXD3, 62 MPP12_GPIO, 63 MPP13_SYSRST_OUTn, 64 MPP14_SATA1_ACTn, 65 MPP15_SATA0_ACTn, 66 MPP16_GPIO, 67 MPP17_GPIO, 68 MPP18_GPIO, 69 MPP19_GPIO, 70 MPP20_GPIO, 71 MPP21_GPIO, 72 MPP22_GPIO, 73 MPP23_GPIO, 74 MPP24_UA2_TXD, 75 MPP25_UA2_RXD, 76 MPP26_UA2_CTSn, 77 MPP27_UA2_RTSn, 78 MPP28_GPIO, 79 MPP29_SYSRST_OUTn, 80 MPP30_GPIO, 81 MPP31_GPIO, 82 MPP32_GPIO, 83 MPP33_GPIO, 84 MPP34_GPIO, 85 MPP35_GPIO, 86 MPP36_GPIO, 87 MPP37_GPIO, 88 MPP38_GPIO, 89 MPP39_GPIO, 90 MPP40_UNUSED, 91 MPP41_UNUSED, 92 MPP42_UNUSED, 93 MPP43_UNUSED, 94 MPP44_UNUSED, 95 MPP45_UNUSED, 96 MPP46_UNUSED, 97 MPP47_UNUSED, 98 MPP48_SATA1_ACTn, 99 MPP49_SATA0_ACTn, 100 0 101 }; 102 103 104 static void __init wxl_init(void) 105 { 106 /* 107 * Basic MV78xx0 setup. Needs to be called early. 108 */ 109 mv78xx0_init(); 110 mv78xx0_mpp_conf(wxl_mpp_config); 111 112 /* 113 * Partition on-chip peripherals between the two CPU cores. 114 */ 115 mv78xx0_ehci0_init(); 116 mv78xx0_ehci1_init(); 117 mv78xx0_ehci2_init(); 118 mv78xx0_ge00_init(&db78x00_ge00_data); 119 mv78xx0_ge01_init(&db78x00_ge01_data); 120 mv78xx0_sata_init(&db78x00_sata_data); 121 mv78xx0_uart0_init(); 122 mv78xx0_uart1_init(); 123 mv78xx0_uart2_init(); 124 mv78xx0_uart3_init(); 125 mv78xx0_i2c_init(); 126 i2c_register_board_info(0, &db78x00_i2c_rtc, 1); 127 } 128 129 static int __init wxl_pci_init(void) 130 { 131 if (machine_is_terastation_wxl()) { 132 /* 133 * Assign the x16 PCIe slot on the board to CPU core 134 * #0, and let CPU core #1 have the four x1 slots. 135 */ 136 if (mv78xx0_core_index() == 0) 137 mv78xx0_pcie_init(0, 1); 138 else 139 mv78xx0_pcie_init(1, 0); 140 } 141 142 return 0; 143 } 144 subsys_initcall(wxl_pci_init); 145 146 MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") 147 /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */ 148 .atag_offset = 0x100, 149 .init_machine = wxl_init, 150 .map_io = mv78xx0_map_io, 151 .init_early = mv78xx0_init_early, 152 .init_irq = mv78xx0_init_irq, 153 .init_time = mv78xx0_timer_init, 154 .restart = mv78xx0_restart, 155 MACHINE_END 156