xref: /linux/arch/arm/mach-highbank/highbank.c (revision b889fcf63cb62e7fdb7816565e28f44dbe4a76a5)
1 /*
2  * Copyright 2010-2011 Calxeda, Inc.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms and conditions of the GNU General Public License,
6  * version 2, as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope it will be useful, but WITHOUT
9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
11  * more details.
12  *
13  * You should have received a copy of the GNU General Public License along with
14  * this program.  If not, see <http://www.gnu.org/licenses/>.
15  */
16 #include <linux/clk.h>
17 #include <linux/clkdev.h>
18 #include <linux/dma-mapping.h>
19 #include <linux/io.h>
20 #include <linux/irq.h>
21 #include <linux/irqdomain.h>
22 #include <linux/of.h>
23 #include <linux/of_irq.h>
24 #include <linux/of_platform.h>
25 #include <linux/of_address.h>
26 #include <linux/smp.h>
27 #include <linux/amba/bus.h>
28 
29 #include <asm/arch_timer.h>
30 #include <asm/cacheflush.h>
31 #include <asm/smp_plat.h>
32 #include <asm/smp_twd.h>
33 #include <asm/hardware/arm_timer.h>
34 #include <asm/hardware/timer-sp.h>
35 #include <asm/hardware/gic.h>
36 #include <asm/hardware/cache-l2x0.h>
37 #include <asm/mach/arch.h>
38 #include <asm/mach/map.h>
39 #include <asm/mach/time.h>
40 
41 #include "core.h"
42 #include "sysregs.h"
43 
44 void __iomem *sregs_base;
45 void __iomem *scu_base_addr;
46 
47 static void __init highbank_scu_map_io(void)
48 {
49 	unsigned long base;
50 
51 	/* Get SCU base */
52 	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
53 
54 	scu_base_addr = ioremap(base, SZ_4K);
55 }
56 
57 #define HB_JUMP_TABLE_PHYS(cpu)		(0x40 + (0x10 * (cpu)))
58 #define HB_JUMP_TABLE_VIRT(cpu)		phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
59 
60 void highbank_set_cpu_jump(int cpu, void *jump_addr)
61 {
62 	cpu = cpu_logical_map(cpu);
63 	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
64 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
65 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
66 			  HB_JUMP_TABLE_PHYS(cpu) + 15);
67 }
68 
69 const static struct of_device_id irq_match[] = {
70 	{ .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
71 	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
72 	{}
73 };
74 
75 #ifdef CONFIG_CACHE_L2X0
76 static void highbank_l2x0_disable(void)
77 {
78 	/* Disable PL310 L2 Cache controller */
79 	highbank_smc1(0x102, 0x0);
80 }
81 #endif
82 
83 static void __init highbank_init_irq(void)
84 {
85 	of_irq_init(irq_match);
86 
87 	if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
88 		highbank_scu_map_io();
89 
90 #ifdef CONFIG_CACHE_L2X0
91 	/* Enable PL310 L2 Cache controller */
92 	highbank_smc1(0x102, 0x1);
93 	l2x0_of_init(0, ~0UL);
94 	outer_cache.disable = highbank_l2x0_disable;
95 #endif
96 }
97 
98 static struct clk_lookup lookup = {
99 	.dev_id = "sp804",
100 	.con_id = NULL,
101 };
102 
103 static void __init highbank_timer_init(void)
104 {
105 	int irq;
106 	struct device_node *np;
107 	void __iomem *timer_base;
108 
109 	/* Map system registers */
110 	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
111 	sregs_base = of_iomap(np, 0);
112 	WARN_ON(!sregs_base);
113 
114 	np = of_find_compatible_node(NULL, NULL, "arm,sp804");
115 	timer_base = of_iomap(np, 0);
116 	WARN_ON(!timer_base);
117 	irq = irq_of_parse_and_map(np, 0);
118 
119 	highbank_clocks_init();
120 	lookup.clk = of_clk_get(np, 0);
121 	clkdev_add(&lookup);
122 
123 	sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
124 	sp804_clockevents_init(timer_base, irq, "timer0");
125 
126 	twd_local_timer_of_register();
127 
128 	arch_timer_of_register();
129 	arch_timer_sched_clock_init();
130 }
131 
132 static struct sys_timer highbank_timer = {
133 	.init = highbank_timer_init,
134 };
135 
136 static void highbank_power_off(void)
137 {
138 	hignbank_set_pwr_shutdown();
139 
140 	while (1)
141 		cpu_do_idle();
142 }
143 
144 static int highbank_platform_notifier(struct notifier_block *nb,
145 				  unsigned long event, void *__dev)
146 {
147 	struct resource *res;
148 	int reg = -1;
149 	struct device *dev = __dev;
150 
151 	if (event != BUS_NOTIFY_ADD_DEVICE)
152 		return NOTIFY_DONE;
153 
154 	if (of_device_is_compatible(dev->of_node, "calxeda,hb-ahci"))
155 		reg = 0xc;
156 	else if (of_device_is_compatible(dev->of_node, "calxeda,hb-sdhci"))
157 		reg = 0x18;
158 	else if (of_device_is_compatible(dev->of_node, "arm,pl330"))
159 		reg = 0x20;
160 	else if (of_device_is_compatible(dev->of_node, "calxeda,hb-xgmac")) {
161 		res = platform_get_resource(to_platform_device(dev),
162 					    IORESOURCE_MEM, 0);
163 		if (res) {
164 			if (res->start == 0xfff50000)
165 				reg = 0;
166 			else if (res->start == 0xfff51000)
167 				reg = 4;
168 		}
169 	}
170 
171 	if (reg < 0)
172 		return NOTIFY_DONE;
173 
174 	if (of_property_read_bool(dev->of_node, "dma-coherent")) {
175 		writel(0xff31, sregs_base + reg);
176 		set_dma_ops(dev, &arm_coherent_dma_ops);
177 	} else
178 		writel(0, sregs_base + reg);
179 
180 	return NOTIFY_OK;
181 }
182 
183 static struct notifier_block highbank_amba_nb = {
184 	.notifier_call = highbank_platform_notifier,
185 };
186 
187 static struct notifier_block highbank_platform_nb = {
188 	.notifier_call = highbank_platform_notifier,
189 };
190 
191 static void __init highbank_init(void)
192 {
193 	pm_power_off = highbank_power_off;
194 	highbank_pm_init();
195 
196 	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
197 	bus_register_notifier(&amba_bustype, &highbank_amba_nb);
198 
199 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
200 }
201 
202 static const char *highbank_match[] __initconst = {
203 	"calxeda,highbank",
204 	"calxeda,ecx-2000",
205 	NULL,
206 };
207 
208 DT_MACHINE_START(HIGHBANK, "Highbank")
209 	.smp		= smp_ops(highbank_smp_ops),
210 	.map_io		= debug_ll_io_init,
211 	.init_irq	= highbank_init_irq,
212 	.timer		= &highbank_timer,
213 	.handle_irq	= gic_handle_irq,
214 	.init_machine	= highbank_init,
215 	.dt_compat	= highbank_match,
216 	.restart	= highbank_restart,
217 MACHINE_END
218