1if ARCH_DAVINCI 2 3config AINTC 4 bool 5 6config CP_INTC 7 bool 8 9config ARCH_DAVINCI_DMx 10 bool 11 12menu "TI DaVinci Implementations" 13 14comment "DaVinci Core Type" 15 16config ARCH_DAVINCI_DM644x 17 bool "DaVinci 644x based system" 18 select AINTC 19 select ARCH_DAVINCI_DMx 20 21config ARCH_DAVINCI_DM355 22 bool "DaVinci 355 based system" 23 select AINTC 24 select ARCH_DAVINCI_DMx 25 26config ARCH_DAVINCI_DM646x 27 bool "DaVinci 646x based system" 28 select AINTC 29 select ARCH_DAVINCI_DMx 30 31config ARCH_DAVINCI_DA830 32 bool "DA830/OMAP-L137 based system" 33 select CP_INTC 34 select ARCH_DAVINCI_DA8XX 35 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 36 37config ARCH_DAVINCI_DA850 38 bool "DA850/OMAP-L138 based system" 39 select CP_INTC 40 select ARCH_DAVINCI_DA8XX 41 select ARCH_HAS_CPUFREQ 42 43config ARCH_DAVINCI_DA8XX 44 bool 45 46config ARCH_DAVINCI_DM365 47 bool "DaVinci 365 based system" 48 select AINTC 49 select ARCH_DAVINCI_DMx 50 51comment "DaVinci Board Type" 52 53config MACH_DAVINCI_EVM 54 bool "TI DM644x EVM" 55 default ARCH_DAVINCI_DM644x 56 depends on ARCH_DAVINCI_DM644x 57 help 58 Configure this option to specify the whether the board used 59 for development is a DM644x EVM 60 61config MACH_SFFSDR 62 bool "Lyrtech SFFSDR" 63 depends on ARCH_DAVINCI_DM644x 64 help 65 Say Y here to select the Lyrtech Small Form Factor 66 Software Defined Radio (SFFSDR) board. 67 68config MACH_NEUROS_OSD2 69 bool "Neuros OSD2 Open Television Set Top Box" 70 depends on ARCH_DAVINCI_DM644x 71 help 72 Configure this option to specify the whether the board used 73 for development is a Neuros OSD2 Open Set Top Box. 74 75config MACH_DAVINCI_DM355_EVM 76 bool "TI DM355 EVM" 77 default ARCH_DAVINCI_DM355 78 depends on ARCH_DAVINCI_DM355 79 help 80 Configure this option to specify the whether the board used 81 for development is a DM355 EVM 82 83config MACH_DM355_LEOPARD 84 bool "DM355 Leopard board" 85 depends on ARCH_DAVINCI_DM355 86 help 87 Configure this option to specify the whether the board used 88 for development is a DM355 Leopard board. 89 90config MACH_DAVINCI_DM6467_EVM 91 bool "TI DM6467 EVM" 92 default ARCH_DAVINCI_DM646x 93 depends on ARCH_DAVINCI_DM646x 94 select MACH_DAVINCI_DM6467TEVM 95 help 96 Configure this option to specify the whether the board used 97 for development is a DM6467 EVM 98 99config MACH_DAVINCI_DM6467TEVM 100 bool 101 102config MACH_DAVINCI_DM365_EVM 103 bool "TI DM365 EVM" 104 default ARCH_DAVINCI_DM365 105 depends on ARCH_DAVINCI_DM365 106 help 107 Configure this option to specify whether the board used 108 for development is a DM365 EVM 109 110config MACH_DAVINCI_DA830_EVM 111 bool "TI DA830/OMAP-L137 Reference Platform" 112 default ARCH_DAVINCI_DA830 113 depends on ARCH_DAVINCI_DA830 114 select GPIO_PCF857X 115 help 116 Say Y here to select the TI DA830/OMAP-L137 Evaluation Module. 117 118choice 119 prompt "Select DA830/OMAP-L137 UI board peripheral" 120 depends on MACH_DAVINCI_DA830_EVM 121 help 122 The presence of UI card on the DA830/OMAP-L137 EVM is detected 123 automatically based on successful probe of the I2C based GPIO 124 expander on that board. This option selected in this menu has 125 an effect only in case of a successful UI card detection. 126 127config DA830_UI_LCD 128 bool "LCD" 129 help 130 Say Y here to use the LCD as a framebuffer or simple character 131 display. 132 133config DA830_UI_NAND 134 bool "NAND flash" 135 help 136 Say Y here to use the NAND flash. Do not forget to setup 137 the switch correctly. 138endchoice 139 140config MACH_DAVINCI_DA850_EVM 141 bool "TI DA850/OMAP-L138 Reference Platform" 142 default ARCH_DAVINCI_DA850 143 depends on ARCH_DAVINCI_DA850 144 select GPIO_PCA953X 145 help 146 Say Y here to select the TI DA850/OMAP-L138 Evaluation Module. 147 148choice 149 prompt "Select peripherals connected to expander on UI board" 150 depends on MACH_DAVINCI_DA850_EVM 151 help 152 The presence of User Interface (UI) card on the DA850/OMAP-L138 153 EVM is detected automatically based on successful probe of the I2C 154 based GPIO expander on that card. This option selected in this 155 menu has an effect only in case of a successful UI card detection. 156 157config DA850_UI_NONE 158 bool "No peripheral is enabled" 159 help 160 Say Y if you do not want to enable any of the peripherals connected 161 to TCA6416 expander on DA850/OMAP-L138 EVM UI card 162 163config DA850_UI_RMII 164 bool "RMII Ethernet PHY" 165 help 166 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM. 167 This PHY is found on the UI daughter card that is supplied with 168 the EVM. 169 NOTE: Please take care while choosing this option, MII PHY will 170 not be functional if RMII mode is selected. 171 172endchoice 173 174config DAVINCI_MUX 175 bool "DAVINCI multiplexing support" 176 depends on ARCH_DAVINCI 177 default y 178 help 179 Pin multiplexing support for DAVINCI boards. If your bootloader 180 sets the multiplexing correctly, say N. Otherwise, or if unsure, 181 say Y. 182 183config DAVINCI_MUX_DEBUG 184 bool "Multiplexing debug output" 185 depends on DAVINCI_MUX 186 help 187 Makes the multiplexing functions print out a lot of debug info. 188 This is useful if you want to find out the correct values of the 189 multiplexing registers. 190 191config DAVINCI_MUX_WARNINGS 192 bool "Warn about pins the bootloader didn't set up" 193 depends on DAVINCI_MUX 194 help 195 Choose Y here to warn whenever driver initialization logic needs 196 to change the pin multiplexing setup. When there are no warnings 197 printed, it's safe to deselect DAVINCI_MUX for your product. 198 199config DAVINCI_RESET_CLOCKS 200 bool "Reset unused clocks during boot" 201 depends on ARCH_DAVINCI 202 help 203 Say Y if you want to reset unused clocks during boot. 204 This option saves power, but assumes all drivers are 205 using the clock framework. Broken drivers that do not 206 yet use clock framework may not work with this option. 207 If you are booting from another operating system, you 208 probably do not want this option enabled until your 209 device drivers work properly. 210 211endmenu 212 213endif 214