1if ARCH_DAVINCI 2 3config AINTC 4 bool 5 6config CP_INTC 7 select IRQ_DOMAIN 8 bool 9 10config ARCH_DAVINCI_DMx 11 select CPU_ARM926T 12 bool 13 14menu "TI DaVinci Implementations" 15 16comment "DaVinci Core Type" 17 18config ARCH_DAVINCI_DM644x 19 bool "DaVinci 644x based system" 20 select AINTC 21 select ARCH_DAVINCI_DMx 22 23config ARCH_DAVINCI_DM355 24 bool "DaVinci 355 based system" 25 select AINTC 26 select ARCH_DAVINCI_DMx 27 28config ARCH_DAVINCI_DM646x 29 bool "DaVinci 646x based system" 30 select AINTC 31 select ARCH_DAVINCI_DMx 32 33config ARCH_DAVINCI_DA830 34 bool "DA830/OMAP-L137/AM17x based system" 35 select CP_INTC 36 select ARCH_DAVINCI_DA8XX 37 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 38 39config ARCH_DAVINCI_DA850 40 bool "DA850/OMAP-L138/AM18x based system" 41 select CP_INTC 42 select ARCH_DAVINCI_DA8XX 43 select ARCH_HAS_CPUFREQ 44 45config ARCH_DAVINCI_DA8XX 46 select CPU_ARM926T 47 bool 48 49config ARCH_DAVINCI_DM365 50 bool "DaVinci 365 based system" 51 select AINTC 52 select ARCH_DAVINCI_DMx 53 54config ARCH_DAVINCI_TNETV107X 55 select CPU_V6 56 select CP_INTC 57 bool "TNETV107X based system" 58 59comment "DaVinci Board Type" 60 61config MACH_DAVINCI_EVM 62 bool "TI DM644x EVM" 63 default ARCH_DAVINCI_DM644x 64 depends on ARCH_DAVINCI_DM644x 65 select EEPROM_AT24 66 select I2C 67 help 68 Configure this option to specify the whether the board used 69 for development is a DM644x EVM 70 71config MACH_SFFSDR 72 bool "Lyrtech SFFSDR" 73 depends on ARCH_DAVINCI_DM644x 74 select EEPROM_AT24 75 select I2C 76 help 77 Say Y here to select the Lyrtech Small Form Factor 78 Software Defined Radio (SFFSDR) board. 79 80config MACH_NEUROS_OSD2 81 bool "Neuros OSD2 Open Television Set Top Box" 82 depends on ARCH_DAVINCI_DM644x 83 help 84 Configure this option to specify the whether the board used 85 for development is a Neuros OSD2 Open Set Top Box. 86 87config MACH_DAVINCI_DM355_EVM 88 bool "TI DM355 EVM" 89 default ARCH_DAVINCI_DM355 90 depends on ARCH_DAVINCI_DM355 91 help 92 Configure this option to specify the whether the board used 93 for development is a DM355 EVM 94 95config MACH_DM355_LEOPARD 96 bool "DM355 Leopard board" 97 depends on ARCH_DAVINCI_DM355 98 help 99 Configure this option to specify the whether the board used 100 for development is a DM355 Leopard board. 101 102config MACH_DAVINCI_DM6467_EVM 103 bool "TI DM6467 EVM" 104 default ARCH_DAVINCI_DM646x 105 depends on ARCH_DAVINCI_DM646x 106 select MACH_DAVINCI_DM6467TEVM 107 select EEPROM_AT24 108 select I2C 109 help 110 Configure this option to specify the whether the board used 111 for development is a DM6467 EVM 112 113config MACH_DAVINCI_DM6467TEVM 114 bool 115 116config MACH_DAVINCI_DM365_EVM 117 bool "TI DM365 EVM" 118 default ARCH_DAVINCI_DM365 119 depends on ARCH_DAVINCI_DM365 120 select EEPROM_AT24 121 select I2C 122 help 123 Configure this option to specify whether the board used 124 for development is a DM365 EVM 125 126config MACH_DAVINCI_DA830_EVM 127 bool "TI DA830/OMAP-L137/AM17x Reference Platform" 128 default ARCH_DAVINCI_DA830 129 depends on ARCH_DAVINCI_DA830 130 select GPIO_PCF857X 131 select EEPROM_AT24 132 select I2C 133 help 134 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. 135 136choice 137 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" 138 depends on MACH_DAVINCI_DA830_EVM 139 help 140 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is 141 detected automatically based on successful probe of the I2C 142 based GPIO expander on that board. This option selected in this 143 menu has an effect only in case of a successful UI card detection. 144 145config DA830_UI_LCD 146 bool "LCD" 147 help 148 Say Y here to use the LCD as a framebuffer or simple character 149 display. 150 151config DA830_UI_NAND 152 bool "NAND flash" 153 help 154 Say Y here to use the NAND flash. Do not forget to setup 155 the switch correctly. 156endchoice 157 158config MACH_DAVINCI_DA850_EVM 159 bool "TI DA850/OMAP-L138/AM18x Reference Platform" 160 default ARCH_DAVINCI_DA850 161 depends on ARCH_DAVINCI_DA850 162 help 163 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. 164 165choice 166 prompt "Select peripherals connected to expander on UI board" 167 depends on MACH_DAVINCI_DA850_EVM 168 help 169 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x 170 EVM is detected automatically based on successful probe of the I2C 171 based GPIO expander on that card. This option selected in this 172 menu has an effect only in case of a successful UI card detection. 173 174config DA850_UI_NONE 175 bool "No peripheral is enabled" 176 help 177 Say Y if you do not want to enable any of the peripherals connected 178 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card 179 180config DA850_UI_RMII 181 bool "RMII Ethernet PHY" 182 help 183 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x 184 EVM. This PHY is found on the UI daughter card that is supplied with 185 the EVM. 186 NOTE: Please take care while choosing this option, MII PHY will 187 not be functional if RMII mode is selected. 188 189endchoice 190 191config DA850_WL12XX 192 bool "AM18x wl1271 daughter board" 193 depends on MACH_DAVINCI_DA850_EVM 194 help 195 The wl1271 daughter card for AM18x EVMs is a combo wireless 196 connectivity add-on card, based on the LS Research TiWi module with 197 Texas Instruments' wl1271 solution. 198 Say Y if you want to use a wl1271 expansion card connected to the 199 AM18x EVM. 200 201config GPIO_PCA953X 202 default MACH_DAVINCI_DA850_EVM 203 204config KEYBOARD_GPIO_POLLED 205 default MACH_DAVINCI_DA850_EVM 206 207config MACH_TNETV107X 208 bool "TI TNETV107X Reference Platform" 209 default ARCH_DAVINCI_TNETV107X 210 depends on ARCH_DAVINCI_TNETV107X 211 help 212 Say Y here to select the TI TNETV107X Evaluation Module. 213 214config MACH_MITYOMAPL138 215 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" 216 depends on ARCH_DAVINCI_DA850 217 select EEPROM_AT24 218 select I2C 219 help 220 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 221 System on Module. Information on this SoM may be found at 222 http://www.mitydsp.com 223 224config MACH_OMAPL138_HAWKBOARD 225 bool "TI AM1808 / OMAPL-138 Hawkboard platform" 226 depends on ARCH_DAVINCI_DA850 227 help 228 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . 229 Information of this board may be found at 230 http://www.hawkboard.org/ 231 232config DAVINCI_MUX 233 bool "DAVINCI multiplexing support" 234 depends on ARCH_DAVINCI 235 default y 236 help 237 Pin multiplexing support for DAVINCI boards. If your bootloader 238 sets the multiplexing correctly, say N. Otherwise, or if unsure, 239 say Y. 240 241config DAVINCI_MUX_DEBUG 242 bool "Multiplexing debug output" 243 depends on DAVINCI_MUX 244 help 245 Makes the multiplexing functions print out a lot of debug info. 246 This is useful if you want to find out the correct values of the 247 multiplexing registers. 248 249config DAVINCI_MUX_WARNINGS 250 bool "Warn about pins the bootloader didn't set up" 251 depends on DAVINCI_MUX 252 help 253 Choose Y here to warn whenever driver initialization logic needs 254 to change the pin multiplexing setup. When there are no warnings 255 printed, it's safe to deselect DAVINCI_MUX for your product. 256 257config DAVINCI_RESET_CLOCKS 258 bool "Reset unused clocks during boot" 259 depends on ARCH_DAVINCI 260 help 261 Say Y if you want to reset unused clocks during boot. 262 This option saves power, but assumes all drivers are 263 using the clock framework. Broken drivers that do not 264 yet use clock framework may not work with this option. 265 If you are booting from another operating system, you 266 probably do not want this option enabled until your 267 device drivers work properly. 268 269endmenu 270 271endif 272