1if ARCH_DAVINCI 2 3config AINTC 4 bool 5 6config CP_INTC 7 bool 8 select IRQ_DOMAIN 9 10config ARCH_DAVINCI_DMx 11 bool 12 select CPU_ARM926T 13 14menu "TI DaVinci Implementations" 15 16comment "DaVinci Core Type" 17 18config ARCH_DAVINCI_DM644x 19 bool "DaVinci 644x based system" 20 select AINTC 21 select ARCH_DAVINCI_DMx 22 23config ARCH_DAVINCI_DM355 24 bool "DaVinci 355 based system" 25 select AINTC 26 select ARCH_DAVINCI_DMx 27 28config ARCH_DAVINCI_DM646x 29 bool "DaVinci 646x based system" 30 select AINTC 31 select ARCH_DAVINCI_DMx 32 33config ARCH_DAVINCI_DA830 34 bool "DA830/OMAP-L137/AM17x based system" 35 select ARCH_DAVINCI_DA8XX 36 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 37 select CP_INTC 38 39config ARCH_DAVINCI_DA850 40 bool "DA850/OMAP-L138/AM18x based system" 41 select ARCH_DAVINCI_DA8XX 42 select ARCH_HAS_CPUFREQ 43 select CP_INTC 44 45config ARCH_DAVINCI_DA8XX 46 bool 47 select CPU_ARM926T 48 49config ARCH_DAVINCI_DM365 50 bool "DaVinci 365 based system" 51 select AINTC 52 select ARCH_DAVINCI_DMx 53 54config ARCH_DAVINCI_TNETV107X 55 bool "TNETV107X based system" 56 select CPU_V6 57 select CP_INTC 58 59comment "DaVinci Board Type" 60 61config MACH_DA8XX_DT 62 bool "Support DA8XX platforms using device tree" 63 default y 64 depends on ARCH_DAVINCI_DA8XX 65 help 66 Say y here to include support for TI DaVinci DA850 based using 67 Flattened Device Tree. More information at Documentation/devicetree 68 69config MACH_DAVINCI_EVM 70 bool "TI DM644x EVM" 71 default ARCH_DAVINCI_DM644x 72 depends on ARCH_DAVINCI_DM644x 73 select EEPROM_AT24 74 select I2C 75 help 76 Configure this option to specify the whether the board used 77 for development is a DM644x EVM 78 79config MACH_SFFSDR 80 bool "Lyrtech SFFSDR" 81 depends on ARCH_DAVINCI_DM644x 82 select EEPROM_AT24 83 select I2C 84 help 85 Say Y here to select the Lyrtech Small Form Factor 86 Software Defined Radio (SFFSDR) board. 87 88config MACH_NEUROS_OSD2 89 bool "Neuros OSD2 Open Television Set Top Box" 90 depends on ARCH_DAVINCI_DM644x 91 help 92 Configure this option to specify the whether the board used 93 for development is a Neuros OSD2 Open Set Top Box. 94 95config MACH_DAVINCI_DM355_EVM 96 bool "TI DM355 EVM" 97 default ARCH_DAVINCI_DM355 98 depends on ARCH_DAVINCI_DM355 99 help 100 Configure this option to specify the whether the board used 101 for development is a DM355 EVM 102 103config MACH_DM355_LEOPARD 104 bool "DM355 Leopard board" 105 depends on ARCH_DAVINCI_DM355 106 help 107 Configure this option to specify the whether the board used 108 for development is a DM355 Leopard board. 109 110config MACH_DAVINCI_DM6467_EVM 111 bool "TI DM6467 EVM" 112 default ARCH_DAVINCI_DM646x 113 depends on ARCH_DAVINCI_DM646x 114 select EEPROM_AT24 115 select I2C 116 select MACH_DAVINCI_DM6467TEVM 117 help 118 Configure this option to specify the whether the board used 119 for development is a DM6467 EVM 120 121config MACH_DAVINCI_DM6467TEVM 122 bool 123 124config MACH_DAVINCI_DM365_EVM 125 bool "TI DM365 EVM" 126 default ARCH_DAVINCI_DM365 127 depends on ARCH_DAVINCI_DM365 128 select EEPROM_AT24 129 select I2C 130 help 131 Configure this option to specify whether the board used 132 for development is a DM365 EVM 133 134config MACH_DAVINCI_DA830_EVM 135 bool "TI DA830/OMAP-L137/AM17x Reference Platform" 136 default ARCH_DAVINCI_DA830 137 depends on ARCH_DAVINCI_DA830 138 select EEPROM_AT24 139 select GPIO_PCF857X 140 select I2C 141 help 142 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. 143 144choice 145 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" 146 depends on MACH_DAVINCI_DA830_EVM 147 help 148 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is 149 detected automatically based on successful probe of the I2C 150 based GPIO expander on that board. This option selected in this 151 menu has an effect only in case of a successful UI card detection. 152 153config DA830_UI_LCD 154 bool "LCD" 155 help 156 Say Y here to use the LCD as a framebuffer or simple character 157 display. 158 159config DA830_UI_NAND 160 bool "NAND flash" 161 help 162 Say Y here to use the NAND flash. Do not forget to setup 163 the switch correctly. 164endchoice 165 166config MACH_DAVINCI_DA850_EVM 167 bool "TI DA850/OMAP-L138/AM18x Reference Platform" 168 default ARCH_DAVINCI_DA850 169 depends on ARCH_DAVINCI_DA850 170 help 171 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. 172 173choice 174 prompt "Select peripherals connected to expander on UI board" 175 depends on MACH_DAVINCI_DA850_EVM 176 help 177 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x 178 EVM is detected automatically based on successful probe of the I2C 179 based GPIO expander on that card. This option selected in this 180 menu has an effect only in case of a successful UI card detection. 181 182config DA850_UI_NONE 183 bool "No peripheral is enabled" 184 help 185 Say Y if you do not want to enable any of the peripherals connected 186 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card 187 188config DA850_UI_RMII 189 bool "RMII Ethernet PHY" 190 help 191 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x 192 EVM. This PHY is found on the UI daughter card that is supplied with 193 the EVM. 194 NOTE: Please take care while choosing this option, MII PHY will 195 not be functional if RMII mode is selected. 196 197config DA850_UI_SD_VIDEO_PORT 198 bool "Video Port Interface" 199 help 200 Say Y if you want to use Video Port Interface (VPIF) on the 201 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the 202 UI daughter card that is supplied with the EVM. 203 204endchoice 205 206config DA850_WL12XX 207 bool "AM18x wl1271 daughter board" 208 depends on MACH_DAVINCI_DA850_EVM 209 help 210 The wl1271 daughter card for AM18x EVMs is a combo wireless 211 connectivity add-on card, based on the LS Research TiWi module with 212 Texas Instruments' wl1271 solution. 213 Say Y if you want to use a wl1271 expansion card connected to the 214 AM18x EVM. 215 216config GPIO_PCA953X 217 default MACH_DAVINCI_DA850_EVM 218 219config KEYBOARD_GPIO_POLLED 220 default MACH_DAVINCI_DA850_EVM 221 222config MACH_TNETV107X 223 bool "TI TNETV107X Reference Platform" 224 default ARCH_DAVINCI_TNETV107X 225 depends on ARCH_DAVINCI_TNETV107X 226 help 227 Say Y here to select the TI TNETV107X Evaluation Module. 228 229config MACH_MITYOMAPL138 230 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" 231 depends on ARCH_DAVINCI_DA850 232 select EEPROM_AT24 233 select I2C 234 help 235 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 236 System on Module. Information on this SoM may be found at 237 http://www.mitydsp.com 238 239config MACH_OMAPL138_HAWKBOARD 240 bool "TI AM1808 / OMAPL-138 Hawkboard platform" 241 depends on ARCH_DAVINCI_DA850 242 help 243 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . 244 Information of this board may be found at 245 http://www.hawkboard.org/ 246 247config DAVINCI_MUX 248 bool "DAVINCI multiplexing support" 249 depends on ARCH_DAVINCI 250 default y 251 help 252 Pin multiplexing support for DAVINCI boards. If your bootloader 253 sets the multiplexing correctly, say N. Otherwise, or if unsure, 254 say Y. 255 256config DAVINCI_MUX_DEBUG 257 bool "Multiplexing debug output" 258 depends on DAVINCI_MUX 259 help 260 Makes the multiplexing functions print out a lot of debug info. 261 This is useful if you want to find out the correct values of the 262 multiplexing registers. 263 264config DAVINCI_MUX_WARNINGS 265 bool "Warn about pins the bootloader didn't set up" 266 depends on DAVINCI_MUX 267 help 268 Choose Y here to warn whenever driver initialization logic needs 269 to change the pin multiplexing setup. When there are no warnings 270 printed, it's safe to deselect DAVINCI_MUX for your product. 271 272config DAVINCI_RESET_CLOCKS 273 bool "Reset unused clocks during boot" 274 depends on ARCH_DAVINCI 275 help 276 Say Y if you want to reset unused clocks during boot. 277 This option saves power, but assumes all drivers are 278 using the clock framework. Broken drivers that do not 279 yet use clock framework may not work with this option. 280 If you are booting from another operating system, you 281 probably do not want this option enabled until your 282 device drivers work properly. 283 284endmenu 285 286endif 287