xref: /linux/arch/arm/kernel/smp_scu.c (revision 93d90ad708b8da6efc0e487b66111aa9db7f70c7)
1 /*
2  *  linux/arch/arm/kernel/smp_scu.c
3  *
4  *  Copyright (C) 2002 ARM Ltd.
5  *  All Rights Reserved
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11 #include <linux/init.h>
12 #include <linux/io.h>
13 
14 #include <asm/smp_plat.h>
15 #include <asm/smp_scu.h>
16 #include <asm/cacheflush.h>
17 #include <asm/cputype.h>
18 
19 #define SCU_CTRL		0x00
20 #define SCU_ENABLE		(1 << 0)
21 #define SCU_STANDBY_ENABLE	(1 << 5)
22 #define SCU_CONFIG		0x04
23 #define SCU_CPU_STATUS		0x08
24 #define SCU_INVALIDATE		0x0c
25 #define SCU_FPGA_REVISION	0x10
26 
27 #ifdef CONFIG_SMP
28 /*
29  * Get the number of CPU cores from the SCU configuration
30  */
31 unsigned int __init scu_get_core_count(void __iomem *scu_base)
32 {
33 	unsigned int ncores = readl_relaxed(scu_base + SCU_CONFIG);
34 	return (ncores & 0x03) + 1;
35 }
36 
37 /*
38  * Enable the SCU
39  */
40 void scu_enable(void __iomem *scu_base)
41 {
42 	u32 scu_ctrl;
43 
44 #ifdef CONFIG_ARM_ERRATA_764369
45 	/* Cortex-A9 only */
46 	if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) {
47 		scu_ctrl = readl_relaxed(scu_base + 0x30);
48 		if (!(scu_ctrl & 1))
49 			writel_relaxed(scu_ctrl | 0x1, scu_base + 0x30);
50 	}
51 #endif
52 
53 	scu_ctrl = readl_relaxed(scu_base + SCU_CTRL);
54 	/* already enabled? */
55 	if (scu_ctrl & SCU_ENABLE)
56 		return;
57 
58 	scu_ctrl |= SCU_ENABLE;
59 
60 	/* Cortex-A9 earlier than r2p0 has no standby bit in SCU */
61 	if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090 &&
62 	    (read_cpuid_id() & 0x00f0000f) >= 0x00200000)
63 		scu_ctrl |= SCU_STANDBY_ENABLE;
64 
65 	writel_relaxed(scu_ctrl, scu_base + SCU_CTRL);
66 
67 	/*
68 	 * Ensure that the data accessed by CPU0 before the SCU was
69 	 * initialised is visible to the other CPUs.
70 	 */
71 	flush_cache_all();
72 }
73 #endif
74 
75 /*
76  * Set the executing CPUs power mode as defined.  This will be in
77  * preparation for it executing a WFI instruction.
78  *
79  * This function must be called with preemption disabled, and as it
80  * has the side effect of disabling coherency, caches must have been
81  * flushed.  Interrupts must also have been disabled.
82  */
83 int scu_power_mode(void __iomem *scu_base, unsigned int mode)
84 {
85 	unsigned int val;
86 	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
87 
88 	if (mode > 3 || mode == 1 || cpu > 3)
89 		return -EINVAL;
90 
91 	val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
92 	val |= mode;
93 	writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
94 
95 	return 0;
96 }
97