1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * Debugging macro include header 4 * 5 * Copyright (C) 2011 Xilinx 6 */ 7#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */ 8#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */ 9#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */ 10 11#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */ 12#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ 13 14#define UART0_PHYS 0xE0000000 15#define UART0_VIRT 0xF0800000 16#define UART1_PHYS 0xE0001000 17#define UART1_VIRT 0xF0801000 18 19#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) 20# define LL_UART_PADDR UART1_PHYS 21# define LL_UART_VADDR UART1_VIRT 22#else 23# define LL_UART_PADDR UART0_PHYS 24# define LL_UART_VADDR UART0_VIRT 25#endif 26 27 .macro addruart, rp, rv, tmp 28 ldr \rp, =LL_UART_PADDR @ physical 29 ldr \rv, =LL_UART_VADDR @ virtual 30 .endm 31 32 .macro senduart,rd,rx 33 strb \rd, [\rx, #UART_FIFO_OFFSET] @ TXDATA 34 .endm 35 36 .macro waituart,rd,rx 371001: ldr \rd, [\rx, #UART_SR_OFFSET] 38ARM_BE8( rev \rd, \rd ) 39 tst \rd, #UART_SR_TXEMPTY 40 beq 1001b 41 .endm 42 43 .macro busyuart,rd,rx 441002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register 45ARM_BE8( rev \rd, \rd ) 46 tst \rd, #UART_SR_TXFULL @ 47 bne 1002b @ wait if FIFO is full 48 .endm 49