1/* 2 * Debugging macro include header 3 * 4 * Copyright (C) 2011 Xilinx 5 * 6 * This software is licensed under the terms of the GNU General Public 7 * License version 2, as published by the Free Software Foundation, and 8 * may be copied, distributed, and modified under those terms. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 */ 15#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */ 16#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */ 17#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */ 18 19#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */ 20#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ 21 22#define UART0_PHYS 0xE0000000 23#define UART0_VIRT 0xF0000000 24#define UART1_PHYS 0xE0001000 25#define UART1_VIRT 0xF0001000 26 27#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) 28# define LL_UART_PADDR UART1_PHYS 29# define LL_UART_VADDR UART1_VIRT 30#else 31# define LL_UART_PADDR UART0_PHYS 32# define LL_UART_VADDR UART0_VIRT 33#endif 34 35 .macro addruart, rp, rv, tmp 36 ldr \rp, =LL_UART_PADDR @ physical 37 ldr \rv, =LL_UART_VADDR @ virtual 38 .endm 39 40 .macro senduart,rd,rx 41 str \rd, [\rx, #UART_FIFO_OFFSET] @ TXDATA 42 .endm 43 44 .macro waituart,rd,rx 451001: ldr \rd, [\rx, #UART_SR_OFFSET] 46ARM_BE8( rev \rd, \rd ) 47 tst \rd, #UART_SR_TXEMPTY 48 beq 1001b 49 .endm 50 51 .macro busyuart,rd,rx 521002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register 53ARM_BE8( rev \rd, \rd ) 54 tst \rd, #UART_SR_TXFULL @ 55 bne 1002b @ wait if FIFO is full 56 .endm 57