1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * linux/arch/arm/common/sa1111.c 4 * 5 * SA1111 support 6 * 7 * Original code by John Dorsey 8 * 9 * This file contains all generic SA1111 support. 10 * 11 * All initialization functions provided here are intended to be called 12 * from machine specific code with proper arguments when required. 13 */ 14 #include <linux/module.h> 15 #include <linux/gpio/driver.h> 16 #include <linux/init.h> 17 #include <linux/irq.h> 18 #include <linux/kernel.h> 19 #include <linux/delay.h> 20 #include <linux/errno.h> 21 #include <linux/ioport.h> 22 #include <linux/platform_device.h> 23 #include <linux/slab.h> 24 #include <linux/spinlock.h> 25 #include <linux/dma-mapping.h> 26 #include <linux/clk.h> 27 #include <linux/io.h> 28 29 #include <mach/hardware.h> 30 #include <asm/mach/irq.h> 31 #include <asm/mach-types.h> 32 #include <linux/sizes.h> 33 34 #include <asm/hardware/sa1111.h> 35 36 /* SA1111 IRQs */ 37 #define IRQ_GPAIN0 (0) 38 #define IRQ_GPAIN1 (1) 39 #define IRQ_GPAIN2 (2) 40 #define IRQ_GPAIN3 (3) 41 #define IRQ_GPBIN0 (4) 42 #define IRQ_GPBIN1 (5) 43 #define IRQ_GPBIN2 (6) 44 #define IRQ_GPBIN3 (7) 45 #define IRQ_GPBIN4 (8) 46 #define IRQ_GPBIN5 (9) 47 #define IRQ_GPCIN0 (10) 48 #define IRQ_GPCIN1 (11) 49 #define IRQ_GPCIN2 (12) 50 #define IRQ_GPCIN3 (13) 51 #define IRQ_GPCIN4 (14) 52 #define IRQ_GPCIN5 (15) 53 #define IRQ_GPCIN6 (16) 54 #define IRQ_GPCIN7 (17) 55 #define IRQ_MSTXINT (18) 56 #define IRQ_MSRXINT (19) 57 #define IRQ_MSSTOPERRINT (20) 58 #define IRQ_TPTXINT (21) 59 #define IRQ_TPRXINT (22) 60 #define IRQ_TPSTOPERRINT (23) 61 #define SSPXMTINT (24) 62 #define SSPRCVINT (25) 63 #define SSPROR (26) 64 #define AUDXMTDMADONEA (32) 65 #define AUDRCVDMADONEA (33) 66 #define AUDXMTDMADONEB (34) 67 #define AUDRCVDMADONEB (35) 68 #define AUDTFSR (36) 69 #define AUDRFSR (37) 70 #define AUDTUR (38) 71 #define AUDROR (39) 72 #define AUDDTS (40) 73 #define AUDRDD (41) 74 #define AUDSTO (42) 75 #define IRQ_USBPWR (43) 76 #define IRQ_HCIM (44) 77 #define IRQ_HCIBUFFACC (45) 78 #define IRQ_HCIRMTWKP (46) 79 #define IRQ_NHCIMFCIR (47) 80 #define IRQ_USB_PORT_RESUME (48) 81 #define IRQ_S0_READY_NINT (49) 82 #define IRQ_S1_READY_NINT (50) 83 #define IRQ_S0_CD_VALID (51) 84 #define IRQ_S1_CD_VALID (52) 85 #define IRQ_S0_BVD1_STSCHG (53) 86 #define IRQ_S1_BVD1_STSCHG (54) 87 #define SA1111_IRQ_NR (55) 88 89 extern void sa1110_mb_enable(void); 90 extern void sa1110_mb_disable(void); 91 92 /* 93 * We keep the following data for the overall SA1111. Note that the 94 * struct device and struct resource are "fake"; they should be supplied 95 * by the bus above us. However, in the interests of getting all SA1111 96 * drivers converted over to the device model, we provide this as an 97 * anchor point for all the other drivers. 98 */ 99 struct sa1111 { 100 struct device *dev; 101 struct clk *clk; 102 unsigned long phys; 103 int irq; 104 int irq_base; /* base for cascaded on-chip IRQs */ 105 spinlock_t lock; 106 void __iomem *base; 107 struct sa1111_platform_data *pdata; 108 struct irq_domain *irqdomain; 109 struct gpio_chip gc; 110 #ifdef CONFIG_PM 111 void *saved_state; 112 #endif 113 }; 114 115 /* 116 * We _really_ need to eliminate this. Its only users 117 * are the PWM and DMA checking code. 118 */ 119 static struct sa1111 *g_sa1111; 120 121 struct sa1111_dev_info { 122 unsigned long offset; 123 unsigned long skpcr_mask; 124 bool dma; 125 unsigned int devid; 126 unsigned int hwirq[6]; 127 }; 128 129 static struct sa1111_dev_info sa1111_devices[] = { 130 { 131 .offset = SA1111_USB, 132 .skpcr_mask = SKPCR_UCLKEN, 133 .dma = true, 134 .devid = SA1111_DEVID_USB, 135 .hwirq = { 136 IRQ_USBPWR, 137 IRQ_HCIM, 138 IRQ_HCIBUFFACC, 139 IRQ_HCIRMTWKP, 140 IRQ_NHCIMFCIR, 141 IRQ_USB_PORT_RESUME 142 }, 143 }, 144 { 145 .offset = 0x0600, 146 .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN, 147 .dma = true, 148 .devid = SA1111_DEVID_SAC, 149 .hwirq = { 150 AUDXMTDMADONEA, 151 AUDXMTDMADONEB, 152 AUDRCVDMADONEA, 153 AUDRCVDMADONEB 154 }, 155 }, 156 { 157 .offset = 0x0800, 158 .skpcr_mask = SKPCR_SCLKEN, 159 .devid = SA1111_DEVID_SSP, 160 }, 161 { 162 .offset = SA1111_KBD, 163 .skpcr_mask = SKPCR_PTCLKEN, 164 .devid = SA1111_DEVID_PS2_KBD, 165 .hwirq = { 166 IRQ_TPRXINT, 167 IRQ_TPTXINT 168 }, 169 }, 170 { 171 .offset = SA1111_MSE, 172 .skpcr_mask = SKPCR_PMCLKEN, 173 .devid = SA1111_DEVID_PS2_MSE, 174 .hwirq = { 175 IRQ_MSRXINT, 176 IRQ_MSTXINT 177 }, 178 }, 179 { 180 .offset = 0x1800, 181 .skpcr_mask = 0, 182 .devid = SA1111_DEVID_PCMCIA, 183 .hwirq = { 184 IRQ_S0_READY_NINT, 185 IRQ_S0_CD_VALID, 186 IRQ_S0_BVD1_STSCHG, 187 IRQ_S1_READY_NINT, 188 IRQ_S1_CD_VALID, 189 IRQ_S1_BVD1_STSCHG, 190 }, 191 }, 192 }; 193 194 static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq) 195 { 196 return irq_create_mapping(sachip->irqdomain, hwirq); 197 } 198 199 static void sa1111_handle_irqdomain(struct irq_domain *irqdomain, int irq) 200 { 201 struct irq_desc *d = irq_to_desc(irq_linear_revmap(irqdomain, irq)); 202 203 if (d) 204 generic_handle_irq_desc(d); 205 } 206 207 /* 208 * SA1111 interrupt support. Since clearing an IRQ while there are 209 * active IRQs causes the interrupt output to pulse, the upper levels 210 * will call us again if there are more interrupts to process. 211 */ 212 static void sa1111_irq_handler(struct irq_desc *desc) 213 { 214 unsigned int stat0, stat1, i; 215 struct sa1111 *sachip = irq_desc_get_handler_data(desc); 216 struct irq_domain *irqdomain; 217 void __iomem *mapbase = sachip->base + SA1111_INTC; 218 219 stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0); 220 stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1); 221 222 writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0); 223 224 desc->irq_data.chip->irq_ack(&desc->irq_data); 225 226 writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1); 227 228 if (stat0 == 0 && stat1 == 0) { 229 do_bad_IRQ(desc); 230 return; 231 } 232 233 irqdomain = sachip->irqdomain; 234 235 for (i = 0; stat0; i++, stat0 >>= 1) 236 if (stat0 & 1) 237 sa1111_handle_irqdomain(irqdomain, i); 238 239 for (i = 32; stat1; i++, stat1 >>= 1) 240 if (stat1 & 1) 241 sa1111_handle_irqdomain(irqdomain, i); 242 243 /* For level-based interrupts */ 244 desc->irq_data.chip->irq_unmask(&desc->irq_data); 245 } 246 247 static u32 sa1111_irqmask(struct irq_data *d) 248 { 249 return BIT(irqd_to_hwirq(d) & 31); 250 } 251 252 static int sa1111_irqbank(struct irq_data *d) 253 { 254 return (irqd_to_hwirq(d) / 32) * 4; 255 } 256 257 static void sa1111_ack_irq(struct irq_data *d) 258 { 259 } 260 261 static void sa1111_mask_irq(struct irq_data *d) 262 { 263 struct sa1111 *sachip = irq_data_get_irq_chip_data(d); 264 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); 265 u32 ie; 266 267 ie = readl_relaxed(mapbase + SA1111_INTEN0); 268 ie &= ~sa1111_irqmask(d); 269 writel(ie, mapbase + SA1111_INTEN0); 270 } 271 272 static void sa1111_unmask_irq(struct irq_data *d) 273 { 274 struct sa1111 *sachip = irq_data_get_irq_chip_data(d); 275 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); 276 u32 ie; 277 278 ie = readl_relaxed(mapbase + SA1111_INTEN0); 279 ie |= sa1111_irqmask(d); 280 writel_relaxed(ie, mapbase + SA1111_INTEN0); 281 } 282 283 /* 284 * Attempt to re-trigger the interrupt. The SA1111 contains a register 285 * (INTSET) which claims to do this. However, in practice no amount of 286 * manipulation of INTEN and INTSET guarantees that the interrupt will 287 * be triggered. In fact, its very difficult, if not impossible to get 288 * INTSET to re-trigger the interrupt. 289 */ 290 static int sa1111_retrigger_irq(struct irq_data *d) 291 { 292 struct sa1111 *sachip = irq_data_get_irq_chip_data(d); 293 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); 294 u32 ip, mask = sa1111_irqmask(d); 295 int i; 296 297 ip = readl_relaxed(mapbase + SA1111_INTPOL0); 298 for (i = 0; i < 8; i++) { 299 writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0); 300 writel_relaxed(ip, mapbase + SA1111_INTPOL0); 301 if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask) 302 break; 303 } 304 305 if (i == 8) { 306 pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n", 307 d->irq); 308 return 0; 309 } 310 311 return 1; 312 } 313 314 static int sa1111_type_irq(struct irq_data *d, unsigned int flags) 315 { 316 struct sa1111 *sachip = irq_data_get_irq_chip_data(d); 317 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); 318 u32 ip, mask = sa1111_irqmask(d); 319 320 if (flags == IRQ_TYPE_PROBE) 321 return 0; 322 323 if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) 324 return -EINVAL; 325 326 ip = readl_relaxed(mapbase + SA1111_INTPOL0); 327 if (flags & IRQ_TYPE_EDGE_RISING) 328 ip &= ~mask; 329 else 330 ip |= mask; 331 writel_relaxed(ip, mapbase + SA1111_INTPOL0); 332 writel_relaxed(ip, mapbase + SA1111_WAKEPOL0); 333 334 return 0; 335 } 336 337 static int sa1111_wake_irq(struct irq_data *d, unsigned int on) 338 { 339 struct sa1111 *sachip = irq_data_get_irq_chip_data(d); 340 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); 341 u32 we, mask = sa1111_irqmask(d); 342 343 we = readl_relaxed(mapbase + SA1111_WAKEEN0); 344 if (on) 345 we |= mask; 346 else 347 we &= ~mask; 348 writel_relaxed(we, mapbase + SA1111_WAKEEN0); 349 350 return 0; 351 } 352 353 static struct irq_chip sa1111_irq_chip = { 354 .name = "SA1111", 355 .irq_ack = sa1111_ack_irq, 356 .irq_mask = sa1111_mask_irq, 357 .irq_unmask = sa1111_unmask_irq, 358 .irq_retrigger = sa1111_retrigger_irq, 359 .irq_set_type = sa1111_type_irq, 360 .irq_set_wake = sa1111_wake_irq, 361 }; 362 363 static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq, 364 irq_hw_number_t hwirq) 365 { 366 struct sa1111 *sachip = d->host_data; 367 368 /* Disallow unavailable interrupts */ 369 if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA) 370 return -EINVAL; 371 372 irq_set_chip_data(irq, sachip); 373 irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq); 374 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); 375 376 return 0; 377 } 378 379 static const struct irq_domain_ops sa1111_irqdomain_ops = { 380 .map = sa1111_irqdomain_map, 381 .xlate = irq_domain_xlate_twocell, 382 }; 383 384 static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) 385 { 386 void __iomem *irqbase = sachip->base + SA1111_INTC; 387 int ret; 388 389 /* 390 * We're guaranteed that this region hasn't been taken. 391 */ 392 request_mem_region(sachip->phys + SA1111_INTC, 512, "irq"); 393 394 ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1); 395 if (ret <= 0) { 396 dev_err(sachip->dev, "unable to allocate %u irqs: %d\n", 397 SA1111_IRQ_NR, ret); 398 if (ret == 0) 399 ret = -EINVAL; 400 return ret; 401 } 402 403 sachip->irq_base = ret; 404 405 /* disable all IRQs */ 406 writel_relaxed(0, irqbase + SA1111_INTEN0); 407 writel_relaxed(0, irqbase + SA1111_INTEN1); 408 writel_relaxed(0, irqbase + SA1111_WAKEEN0); 409 writel_relaxed(0, irqbase + SA1111_WAKEEN1); 410 411 /* 412 * detect on rising edge. Note: Feb 2001 Errata for SA1111 413 * specifies that S0ReadyInt and S1ReadyInt should be '1'. 414 */ 415 writel_relaxed(0, irqbase + SA1111_INTPOL0); 416 writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) | 417 BIT(IRQ_S1_READY_NINT & 31), 418 irqbase + SA1111_INTPOL1); 419 420 /* clear all IRQs */ 421 writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0); 422 writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1); 423 424 sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR, 425 &sa1111_irqdomain_ops, 426 sachip); 427 if (!sachip->irqdomain) { 428 irq_free_descs(sachip->irq_base, SA1111_IRQ_NR); 429 return -ENOMEM; 430 } 431 432 irq_domain_associate_many(sachip->irqdomain, 433 sachip->irq_base + IRQ_GPAIN0, 434 IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0); 435 irq_domain_associate_many(sachip->irqdomain, 436 sachip->irq_base + AUDXMTDMADONEA, 437 AUDXMTDMADONEA, 438 IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA); 439 440 /* 441 * Register SA1111 interrupt 442 */ 443 irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); 444 irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler, 445 sachip); 446 447 dev_info(sachip->dev, "Providing IRQ%u-%u\n", 448 sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1); 449 450 return 0; 451 } 452 453 static void sa1111_remove_irq(struct sa1111 *sachip) 454 { 455 struct irq_domain *domain = sachip->irqdomain; 456 void __iomem *irqbase = sachip->base + SA1111_INTC; 457 int i; 458 459 /* disable all IRQs */ 460 writel_relaxed(0, irqbase + SA1111_INTEN0); 461 writel_relaxed(0, irqbase + SA1111_INTEN1); 462 writel_relaxed(0, irqbase + SA1111_WAKEEN0); 463 writel_relaxed(0, irqbase + SA1111_WAKEEN1); 464 465 irq_set_chained_handler_and_data(sachip->irq, NULL, NULL); 466 for (i = 0; i < SA1111_IRQ_NR; i++) 467 irq_dispose_mapping(irq_find_mapping(domain, i)); 468 irq_domain_remove(domain); 469 470 release_mem_region(sachip->phys + SA1111_INTC, 512); 471 } 472 473 enum { 474 SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR), 475 SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR), 476 SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR), 477 SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR), 478 SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR), 479 }; 480 481 static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc) 482 { 483 return container_of(gc, struct sa1111, gc); 484 } 485 486 static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset) 487 { 488 void __iomem *reg = sachip->base + SA1111_GPIO; 489 490 if (offset < 4) 491 return reg + SA1111_GPIO_PADDR; 492 if (offset < 10) 493 return reg + SA1111_GPIO_PBDDR; 494 if (offset < 18) 495 return reg + SA1111_GPIO_PCDDR; 496 return NULL; 497 } 498 499 static u32 sa1111_gpio_map_bit(unsigned offset) 500 { 501 if (offset < 4) 502 return BIT(offset); 503 if (offset < 10) 504 return BIT(offset - 4); 505 if (offset < 18) 506 return BIT(offset - 10); 507 return 0; 508 } 509 510 static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set) 511 { 512 u32 val; 513 514 val = readl_relaxed(reg); 515 val &= ~mask; 516 val |= mask & set; 517 writel_relaxed(val, reg); 518 } 519 520 static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset) 521 { 522 struct sa1111 *sachip = gc_to_sa1111(gc); 523 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); 524 u32 mask = sa1111_gpio_map_bit(offset); 525 526 return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask); 527 } 528 529 static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset) 530 { 531 struct sa1111 *sachip = gc_to_sa1111(gc); 532 unsigned long flags; 533 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); 534 u32 mask = sa1111_gpio_map_bit(offset); 535 536 spin_lock_irqsave(&sachip->lock, flags); 537 sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask); 538 sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask); 539 spin_unlock_irqrestore(&sachip->lock, flags); 540 541 return 0; 542 } 543 544 static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset, 545 int value) 546 { 547 struct sa1111 *sachip = gc_to_sa1111(gc); 548 unsigned long flags; 549 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); 550 u32 mask = sa1111_gpio_map_bit(offset); 551 552 spin_lock_irqsave(&sachip->lock, flags); 553 sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0); 554 sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0); 555 sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0); 556 sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0); 557 spin_unlock_irqrestore(&sachip->lock, flags); 558 559 return 0; 560 } 561 562 static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset) 563 { 564 struct sa1111 *sachip = gc_to_sa1111(gc); 565 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); 566 u32 mask = sa1111_gpio_map_bit(offset); 567 568 return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask); 569 } 570 571 static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value) 572 { 573 struct sa1111 *sachip = gc_to_sa1111(gc); 574 unsigned long flags; 575 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); 576 u32 mask = sa1111_gpio_map_bit(offset); 577 578 spin_lock_irqsave(&sachip->lock, flags); 579 sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0); 580 sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0); 581 spin_unlock_irqrestore(&sachip->lock, flags); 582 } 583 584 static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, 585 unsigned long *bits) 586 { 587 struct sa1111 *sachip = gc_to_sa1111(gc); 588 unsigned long flags; 589 void __iomem *reg = sachip->base + SA1111_GPIO; 590 u32 msk, val; 591 592 msk = *mask; 593 val = *bits; 594 595 spin_lock_irqsave(&sachip->lock, flags); 596 sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val); 597 sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val); 598 sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4); 599 sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4); 600 sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12); 601 sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12); 602 spin_unlock_irqrestore(&sachip->lock, flags); 603 } 604 605 static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset) 606 { 607 struct sa1111 *sachip = gc_to_sa1111(gc); 608 609 return sa1111_map_irq(sachip, offset); 610 } 611 612 static int sa1111_setup_gpios(struct sa1111 *sachip) 613 { 614 sachip->gc.label = "sa1111"; 615 sachip->gc.parent = sachip->dev; 616 sachip->gc.owner = THIS_MODULE; 617 sachip->gc.get_direction = sa1111_gpio_get_direction; 618 sachip->gc.direction_input = sa1111_gpio_direction_input; 619 sachip->gc.direction_output = sa1111_gpio_direction_output; 620 sachip->gc.get = sa1111_gpio_get; 621 sachip->gc.set = sa1111_gpio_set; 622 sachip->gc.set_multiple = sa1111_gpio_set_multiple; 623 sachip->gc.to_irq = sa1111_gpio_to_irq; 624 sachip->gc.base = -1; 625 sachip->gc.ngpio = 18; 626 627 return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip); 628 } 629 630 /* 631 * Bring the SA1111 out of reset. This requires a set procedure: 632 * 1. nRESET asserted (by hardware) 633 * 2. CLK turned on from SA1110 634 * 3. nRESET deasserted 635 * 4. VCO turned on, PLL_BYPASS turned off 636 * 5. Wait lock time, then assert RCLKEn 637 * 7. PCR set to allow clocking of individual functions 638 * 639 * Until we've done this, the only registers we can access are: 640 * SBI_SKCR 641 * SBI_SMCR 642 * SBI_SKID 643 */ 644 static void sa1111_wake(struct sa1111 *sachip) 645 { 646 unsigned long flags, r; 647 648 spin_lock_irqsave(&sachip->lock, flags); 649 650 clk_enable(sachip->clk); 651 652 /* 653 * Turn VCO on, and disable PLL Bypass. 654 */ 655 r = readl_relaxed(sachip->base + SA1111_SKCR); 656 r &= ~SKCR_VCO_OFF; 657 writel_relaxed(r, sachip->base + SA1111_SKCR); 658 r |= SKCR_PLL_BYPASS | SKCR_OE_EN; 659 writel_relaxed(r, sachip->base + SA1111_SKCR); 660 661 /* 662 * Wait lock time. SA1111 manual _doesn't_ 663 * specify a figure for this! We choose 100us. 664 */ 665 udelay(100); 666 667 /* 668 * Enable RCLK. We also ensure that RDYEN is set. 669 */ 670 r |= SKCR_RCLKEN | SKCR_RDYEN; 671 writel_relaxed(r, sachip->base + SA1111_SKCR); 672 673 /* 674 * Wait 14 RCLK cycles for the chip to finish coming out 675 * of reset. (RCLK=24MHz). This is 590ns. 676 */ 677 udelay(1); 678 679 /* 680 * Ensure all clocks are initially off. 681 */ 682 writel_relaxed(0, sachip->base + SA1111_SKPCR); 683 684 spin_unlock_irqrestore(&sachip->lock, flags); 685 } 686 687 #ifdef CONFIG_ARCH_SA1100 688 689 static u32 sa1111_dma_mask[] = { 690 ~0, 691 ~(1 << 20), 692 ~(1 << 23), 693 ~(1 << 24), 694 ~(1 << 25), 695 ~(1 << 20), 696 ~(1 << 20), 697 0, 698 }; 699 700 /* 701 * Configure the SA1111 shared memory controller. 702 */ 703 void 704 sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, 705 unsigned int cas_latency) 706 { 707 unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC); 708 709 if (cas_latency == 3) 710 smcr |= SMCR_CLAT; 711 712 writel_relaxed(smcr, sachip->base + SA1111_SMCR); 713 714 /* 715 * Now clear the bits in the DMA mask to work around the SA1111 716 * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion 717 * Chip Specification Update, June 2000, Erratum #7). 718 */ 719 if (sachip->dev->dma_mask) 720 *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2]; 721 722 sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2]; 723 } 724 #endif 725 726 static void sa1111_dev_release(struct device *_dev) 727 { 728 struct sa1111_dev *dev = to_sa1111_device(_dev); 729 730 kfree(dev); 731 } 732 733 static int 734 sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, 735 struct sa1111_dev_info *info) 736 { 737 struct sa1111_dev *dev; 738 unsigned i; 739 int ret; 740 741 dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL); 742 if (!dev) { 743 ret = -ENOMEM; 744 goto err_alloc; 745 } 746 747 device_initialize(&dev->dev); 748 dev_set_name(&dev->dev, "%4.4lx", info->offset); 749 dev->devid = info->devid; 750 dev->dev.parent = sachip->dev; 751 dev->dev.bus = &sa1111_bus_type; 752 dev->dev.release = sa1111_dev_release; 753 dev->res.start = sachip->phys + info->offset; 754 dev->res.end = dev->res.start + 511; 755 dev->res.name = dev_name(&dev->dev); 756 dev->res.flags = IORESOURCE_MEM; 757 dev->mapbase = sachip->base + info->offset; 758 dev->skpcr_mask = info->skpcr_mask; 759 760 for (i = 0; i < ARRAY_SIZE(info->hwirq); i++) 761 dev->hwirq[i] = info->hwirq[i]; 762 763 /* 764 * If the parent device has a DMA mask associated with it, and 765 * this child supports DMA, propagate it down to the children. 766 */ 767 if (info->dma && sachip->dev->dma_mask) { 768 dev->dma_mask = *sachip->dev->dma_mask; 769 dev->dev.dma_mask = &dev->dma_mask; 770 dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask; 771 } 772 773 ret = request_resource(parent, &dev->res); 774 if (ret) { 775 dev_err(sachip->dev, "failed to allocate resource for %s\n", 776 dev->res.name); 777 goto err_resource; 778 } 779 780 ret = device_add(&dev->dev); 781 if (ret) 782 goto err_add; 783 return 0; 784 785 err_add: 786 release_resource(&dev->res); 787 err_resource: 788 put_device(&dev->dev); 789 err_alloc: 790 return ret; 791 } 792 793 /** 794 * sa1111_probe - probe for a single SA1111 chip. 795 * @phys_addr: physical address of device. 796 * 797 * Probe for a SA1111 chip. This must be called 798 * before any other SA1111-specific code. 799 * 800 * Returns: 801 * %-ENODEV device not found. 802 * %-EBUSY physical address already marked in-use. 803 * %-EINVAL no platform data passed 804 * %0 successful. 805 */ 806 static int __sa1111_probe(struct device *me, struct resource *mem, int irq) 807 { 808 struct sa1111_platform_data *pd = me->platform_data; 809 struct sa1111 *sachip; 810 unsigned long id; 811 unsigned int has_devs; 812 int i, ret = -ENODEV; 813 814 if (!pd) 815 return -EINVAL; 816 817 sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL); 818 if (!sachip) 819 return -ENOMEM; 820 821 sachip->clk = devm_clk_get(me, "SA1111_CLK"); 822 if (IS_ERR(sachip->clk)) 823 return PTR_ERR(sachip->clk); 824 825 ret = clk_prepare(sachip->clk); 826 if (ret) 827 return ret; 828 829 spin_lock_init(&sachip->lock); 830 831 sachip->dev = me; 832 dev_set_drvdata(sachip->dev, sachip); 833 834 sachip->pdata = pd; 835 sachip->phys = mem->start; 836 sachip->irq = irq; 837 838 /* 839 * Map the whole region. This also maps the 840 * registers for our children. 841 */ 842 sachip->base = ioremap(mem->start, PAGE_SIZE * 2); 843 if (!sachip->base) { 844 ret = -ENOMEM; 845 goto err_clk_unprep; 846 } 847 848 /* 849 * Probe for the chip. Only touch the SBI registers. 850 */ 851 id = readl_relaxed(sachip->base + SA1111_SKID); 852 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { 853 printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id); 854 ret = -ENODEV; 855 goto err_unmap; 856 } 857 858 pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n", 859 (id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK); 860 861 /* 862 * We found it. Wake the chip up, and initialise. 863 */ 864 sa1111_wake(sachip); 865 866 /* 867 * The interrupt controller must be initialised before any 868 * other device to ensure that the interrupts are available. 869 */ 870 ret = sa1111_setup_irq(sachip, pd->irq_base); 871 if (ret) 872 goto err_clk; 873 874 /* Setup the GPIOs - should really be done after the IRQ setup */ 875 ret = sa1111_setup_gpios(sachip); 876 if (ret) 877 goto err_irq; 878 879 #ifdef CONFIG_ARCH_SA1100 880 { 881 unsigned int val; 882 883 /* 884 * The SDRAM configuration of the SA1110 and the SA1111 must 885 * match. This is very important to ensure that SA1111 accesses 886 * don't corrupt the SDRAM. Note that this ungates the SA1111's 887 * MBGNT signal, so we must have called sa1110_mb_disable() 888 * beforehand. 889 */ 890 sa1111_configure_smc(sachip, 1, 891 FExtr(MDCNFG, MDCNFG_SA1110_DRAC0), 892 FExtr(MDCNFG, MDCNFG_SA1110_TDL0)); 893 894 /* 895 * We only need to turn on DCLK whenever we want to use the 896 * DMA. It can otherwise be held firmly in the off position. 897 * (currently, we always enable it.) 898 */ 899 val = readl_relaxed(sachip->base + SA1111_SKPCR); 900 writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR); 901 902 /* 903 * Enable the SA1110 memory bus request and grant signals. 904 */ 905 sa1110_mb_enable(); 906 } 907 #endif 908 909 g_sa1111 = sachip; 910 911 has_devs = ~0; 912 if (pd) 913 has_devs &= ~pd->disable_devs; 914 915 for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++) 916 if (sa1111_devices[i].devid & has_devs) 917 sa1111_init_one_child(sachip, mem, &sa1111_devices[i]); 918 919 return 0; 920 921 err_irq: 922 sa1111_remove_irq(sachip); 923 err_clk: 924 clk_disable(sachip->clk); 925 err_unmap: 926 iounmap(sachip->base); 927 err_clk_unprep: 928 clk_unprepare(sachip->clk); 929 return ret; 930 } 931 932 static int sa1111_remove_one(struct device *dev, void *data) 933 { 934 struct sa1111_dev *sadev = to_sa1111_device(dev); 935 if (dev->bus != &sa1111_bus_type) 936 return 0; 937 device_del(&sadev->dev); 938 release_resource(&sadev->res); 939 put_device(&sadev->dev); 940 return 0; 941 } 942 943 static void __sa1111_remove(struct sa1111 *sachip) 944 { 945 device_for_each_child(sachip->dev, NULL, sa1111_remove_one); 946 947 sa1111_remove_irq(sachip); 948 949 clk_disable(sachip->clk); 950 clk_unprepare(sachip->clk); 951 952 iounmap(sachip->base); 953 } 954 955 struct sa1111_save_data { 956 unsigned int skcr; 957 unsigned int skpcr; 958 unsigned int skcdr; 959 unsigned char skaud; 960 unsigned char skpwm0; 961 unsigned char skpwm1; 962 963 /* 964 * Interrupt controller 965 */ 966 unsigned int intpol0; 967 unsigned int intpol1; 968 unsigned int inten0; 969 unsigned int inten1; 970 unsigned int wakepol0; 971 unsigned int wakepol1; 972 unsigned int wakeen0; 973 unsigned int wakeen1; 974 }; 975 976 #ifdef CONFIG_PM 977 978 static int sa1111_suspend_noirq(struct device *dev) 979 { 980 struct sa1111 *sachip = dev_get_drvdata(dev); 981 struct sa1111_save_data *save; 982 unsigned long flags; 983 unsigned int val; 984 void __iomem *base; 985 986 save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); 987 if (!save) 988 return -ENOMEM; 989 sachip->saved_state = save; 990 991 spin_lock_irqsave(&sachip->lock, flags); 992 993 /* 994 * Save state. 995 */ 996 base = sachip->base; 997 save->skcr = readl_relaxed(base + SA1111_SKCR); 998 save->skpcr = readl_relaxed(base + SA1111_SKPCR); 999 save->skcdr = readl_relaxed(base + SA1111_SKCDR); 1000 save->skaud = readl_relaxed(base + SA1111_SKAUD); 1001 save->skpwm0 = readl_relaxed(base + SA1111_SKPWM0); 1002 save->skpwm1 = readl_relaxed(base + SA1111_SKPWM1); 1003 1004 writel_relaxed(0, sachip->base + SA1111_SKPWM0); 1005 writel_relaxed(0, sachip->base + SA1111_SKPWM1); 1006 1007 base = sachip->base + SA1111_INTC; 1008 save->intpol0 = readl_relaxed(base + SA1111_INTPOL0); 1009 save->intpol1 = readl_relaxed(base + SA1111_INTPOL1); 1010 save->inten0 = readl_relaxed(base + SA1111_INTEN0); 1011 save->inten1 = readl_relaxed(base + SA1111_INTEN1); 1012 save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0); 1013 save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1); 1014 save->wakeen0 = readl_relaxed(base + SA1111_WAKEEN0); 1015 save->wakeen1 = readl_relaxed(base + SA1111_WAKEEN1); 1016 1017 /* 1018 * Disable. 1019 */ 1020 val = readl_relaxed(sachip->base + SA1111_SKCR); 1021 writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR); 1022 1023 clk_disable(sachip->clk); 1024 1025 spin_unlock_irqrestore(&sachip->lock, flags); 1026 1027 #ifdef CONFIG_ARCH_SA1100 1028 sa1110_mb_disable(); 1029 #endif 1030 1031 return 0; 1032 } 1033 1034 /* 1035 * sa1111_resume - Restore the SA1111 device state. 1036 * @dev: device to restore 1037 * 1038 * Restore the general state of the SA1111; clock control and 1039 * interrupt controller. Other parts of the SA1111 must be 1040 * restored by their respective drivers, and must be called 1041 * via LDM after this function. 1042 */ 1043 static int sa1111_resume_noirq(struct device *dev) 1044 { 1045 struct sa1111 *sachip = dev_get_drvdata(dev); 1046 struct sa1111_save_data *save; 1047 unsigned long flags, id; 1048 void __iomem *base; 1049 1050 save = sachip->saved_state; 1051 if (!save) 1052 return 0; 1053 1054 /* 1055 * Ensure that the SA1111 is still here. 1056 * FIXME: shouldn't do this here. 1057 */ 1058 id = readl_relaxed(sachip->base + SA1111_SKID); 1059 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { 1060 __sa1111_remove(sachip); 1061 dev_set_drvdata(dev, NULL); 1062 kfree(save); 1063 return 0; 1064 } 1065 1066 /* 1067 * First of all, wake up the chip. 1068 */ 1069 sa1111_wake(sachip); 1070 1071 #ifdef CONFIG_ARCH_SA1100 1072 /* Enable the memory bus request/grant signals */ 1073 sa1110_mb_enable(); 1074 #endif 1075 1076 /* 1077 * Only lock for write ops. Also, sa1111_wake must be called with 1078 * released spinlock! 1079 */ 1080 spin_lock_irqsave(&sachip->lock, flags); 1081 1082 writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0); 1083 writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1); 1084 1085 base = sachip->base; 1086 writel_relaxed(save->skcr, base + SA1111_SKCR); 1087 writel_relaxed(save->skpcr, base + SA1111_SKPCR); 1088 writel_relaxed(save->skcdr, base + SA1111_SKCDR); 1089 writel_relaxed(save->skaud, base + SA1111_SKAUD); 1090 writel_relaxed(save->skpwm0, base + SA1111_SKPWM0); 1091 writel_relaxed(save->skpwm1, base + SA1111_SKPWM1); 1092 1093 base = sachip->base + SA1111_INTC; 1094 writel_relaxed(save->intpol0, base + SA1111_INTPOL0); 1095 writel_relaxed(save->intpol1, base + SA1111_INTPOL1); 1096 writel_relaxed(save->inten0, base + SA1111_INTEN0); 1097 writel_relaxed(save->inten1, base + SA1111_INTEN1); 1098 writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0); 1099 writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1); 1100 writel_relaxed(save->wakeen0, base + SA1111_WAKEEN0); 1101 writel_relaxed(save->wakeen1, base + SA1111_WAKEEN1); 1102 1103 spin_unlock_irqrestore(&sachip->lock, flags); 1104 1105 sachip->saved_state = NULL; 1106 kfree(save); 1107 1108 return 0; 1109 } 1110 1111 #else 1112 #define sa1111_suspend_noirq NULL 1113 #define sa1111_resume_noirq NULL 1114 #endif 1115 1116 static int sa1111_probe(struct platform_device *pdev) 1117 { 1118 struct resource *mem; 1119 int irq; 1120 1121 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1122 if (!mem) 1123 return -EINVAL; 1124 irq = platform_get_irq(pdev, 0); 1125 if (irq < 0) 1126 return irq; 1127 1128 return __sa1111_probe(&pdev->dev, mem, irq); 1129 } 1130 1131 static int sa1111_remove(struct platform_device *pdev) 1132 { 1133 struct sa1111 *sachip = platform_get_drvdata(pdev); 1134 1135 if (sachip) { 1136 #ifdef CONFIG_PM 1137 kfree(sachip->saved_state); 1138 sachip->saved_state = NULL; 1139 #endif 1140 __sa1111_remove(sachip); 1141 platform_set_drvdata(pdev, NULL); 1142 } 1143 1144 return 0; 1145 } 1146 1147 static struct dev_pm_ops sa1111_pm_ops = { 1148 .suspend_noirq = sa1111_suspend_noirq, 1149 .resume_noirq = sa1111_resume_noirq, 1150 }; 1151 1152 /* 1153 * Not sure if this should be on the system bus or not yet. 1154 * We really want some way to register a system device at 1155 * the per-machine level, and then have this driver pick 1156 * up the registered devices. 1157 * 1158 * We also need to handle the SDRAM configuration for 1159 * PXA250/SA1110 machine classes. 1160 */ 1161 static struct platform_driver sa1111_device_driver = { 1162 .probe = sa1111_probe, 1163 .remove = sa1111_remove, 1164 .driver = { 1165 .name = "sa1111", 1166 .pm = &sa1111_pm_ops, 1167 }, 1168 }; 1169 1170 /* 1171 * Get the parent device driver (us) structure 1172 * from a child function device 1173 */ 1174 static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev) 1175 { 1176 return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent); 1177 } 1178 1179 /* 1180 * The bits in the opdiv field are non-linear. 1181 */ 1182 static unsigned char opdiv_table[] = { 1, 4, 2, 8 }; 1183 1184 static unsigned int __sa1111_pll_clock(struct sa1111 *sachip) 1185 { 1186 unsigned int skcdr, fbdiv, ipdiv, opdiv; 1187 1188 skcdr = readl_relaxed(sachip->base + SA1111_SKCDR); 1189 1190 fbdiv = (skcdr & 0x007f) + 2; 1191 ipdiv = ((skcdr & 0x0f80) >> 7) + 2; 1192 opdiv = opdiv_table[(skcdr & 0x3000) >> 12]; 1193 1194 return 3686400 * fbdiv / (ipdiv * opdiv); 1195 } 1196 1197 /** 1198 * sa1111_pll_clock - return the current PLL clock frequency. 1199 * @sadev: SA1111 function block 1200 * 1201 * BUG: we should look at SKCR. We also blindly believe that 1202 * the chip is being fed with the 3.6864MHz clock. 1203 * 1204 * Returns the PLL clock in Hz. 1205 */ 1206 unsigned int sa1111_pll_clock(struct sa1111_dev *sadev) 1207 { 1208 struct sa1111 *sachip = sa1111_chip_driver(sadev); 1209 1210 return __sa1111_pll_clock(sachip); 1211 } 1212 EXPORT_SYMBOL(sa1111_pll_clock); 1213 1214 /** 1215 * sa1111_select_audio_mode - select I2S or AC link mode 1216 * @sadev: SA1111 function block 1217 * @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S 1218 * 1219 * Frob the SKCR to select AC Link mode or I2S mode for 1220 * the audio block. 1221 */ 1222 void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode) 1223 { 1224 struct sa1111 *sachip = sa1111_chip_driver(sadev); 1225 unsigned long flags; 1226 unsigned int val; 1227 1228 spin_lock_irqsave(&sachip->lock, flags); 1229 1230 val = readl_relaxed(sachip->base + SA1111_SKCR); 1231 if (mode == SA1111_AUDIO_I2S) { 1232 val &= ~SKCR_SELAC; 1233 } else { 1234 val |= SKCR_SELAC; 1235 } 1236 writel_relaxed(val, sachip->base + SA1111_SKCR); 1237 1238 spin_unlock_irqrestore(&sachip->lock, flags); 1239 } 1240 EXPORT_SYMBOL(sa1111_select_audio_mode); 1241 1242 /** 1243 * sa1111_set_audio_rate - set the audio sample rate 1244 * @sadev: SA1111 SAC function block 1245 * @rate: sample rate to select 1246 */ 1247 int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate) 1248 { 1249 struct sa1111 *sachip = sa1111_chip_driver(sadev); 1250 unsigned int div; 1251 1252 if (sadev->devid != SA1111_DEVID_SAC) 1253 return -EINVAL; 1254 1255 div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate; 1256 if (div == 0) 1257 div = 1; 1258 if (div > 128) 1259 div = 128; 1260 1261 writel_relaxed(div - 1, sachip->base + SA1111_SKAUD); 1262 1263 return 0; 1264 } 1265 EXPORT_SYMBOL(sa1111_set_audio_rate); 1266 1267 /** 1268 * sa1111_get_audio_rate - get the audio sample rate 1269 * @sadev: SA1111 SAC function block device 1270 */ 1271 int sa1111_get_audio_rate(struct sa1111_dev *sadev) 1272 { 1273 struct sa1111 *sachip = sa1111_chip_driver(sadev); 1274 unsigned long div; 1275 1276 if (sadev->devid != SA1111_DEVID_SAC) 1277 return -EINVAL; 1278 1279 div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1; 1280 1281 return __sa1111_pll_clock(sachip) / (256 * div); 1282 } 1283 EXPORT_SYMBOL(sa1111_get_audio_rate); 1284 1285 /* 1286 * Individual device operations. 1287 */ 1288 1289 /** 1290 * sa1111_enable_device - enable an on-chip SA1111 function block 1291 * @sadev: SA1111 function block device to enable 1292 */ 1293 int sa1111_enable_device(struct sa1111_dev *sadev) 1294 { 1295 struct sa1111 *sachip = sa1111_chip_driver(sadev); 1296 unsigned long flags; 1297 unsigned int val; 1298 int ret = 0; 1299 1300 if (sachip->pdata && sachip->pdata->enable) 1301 ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid); 1302 1303 if (ret == 0) { 1304 spin_lock_irqsave(&sachip->lock, flags); 1305 val = readl_relaxed(sachip->base + SA1111_SKPCR); 1306 writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); 1307 spin_unlock_irqrestore(&sachip->lock, flags); 1308 } 1309 return ret; 1310 } 1311 EXPORT_SYMBOL(sa1111_enable_device); 1312 1313 /** 1314 * sa1111_disable_device - disable an on-chip SA1111 function block 1315 * @sadev: SA1111 function block device to disable 1316 */ 1317 void sa1111_disable_device(struct sa1111_dev *sadev) 1318 { 1319 struct sa1111 *sachip = sa1111_chip_driver(sadev); 1320 unsigned long flags; 1321 unsigned int val; 1322 1323 spin_lock_irqsave(&sachip->lock, flags); 1324 val = readl_relaxed(sachip->base + SA1111_SKPCR); 1325 writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR); 1326 spin_unlock_irqrestore(&sachip->lock, flags); 1327 1328 if (sachip->pdata && sachip->pdata->disable) 1329 sachip->pdata->disable(sachip->pdata->data, sadev->devid); 1330 } 1331 EXPORT_SYMBOL(sa1111_disable_device); 1332 1333 int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num) 1334 { 1335 struct sa1111 *sachip = sa1111_chip_driver(sadev); 1336 if (num >= ARRAY_SIZE(sadev->hwirq)) 1337 return -EINVAL; 1338 return sa1111_map_irq(sachip, sadev->hwirq[num]); 1339 } 1340 EXPORT_SYMBOL_GPL(sa1111_get_irq); 1341 1342 /* 1343 * SA1111 "Register Access Bus." 1344 * 1345 * We model this as a regular bus type, and hang devices directly 1346 * off this. 1347 */ 1348 static int sa1111_match(struct device *_dev, struct device_driver *_drv) 1349 { 1350 struct sa1111_dev *dev = to_sa1111_device(_dev); 1351 struct sa1111_driver *drv = SA1111_DRV(_drv); 1352 1353 return !!(dev->devid & drv->devid); 1354 } 1355 1356 static int sa1111_bus_probe(struct device *dev) 1357 { 1358 struct sa1111_dev *sadev = to_sa1111_device(dev); 1359 struct sa1111_driver *drv = SA1111_DRV(dev->driver); 1360 int ret = -ENODEV; 1361 1362 if (drv->probe) 1363 ret = drv->probe(sadev); 1364 return ret; 1365 } 1366 1367 static int sa1111_bus_remove(struct device *dev) 1368 { 1369 struct sa1111_dev *sadev = to_sa1111_device(dev); 1370 struct sa1111_driver *drv = SA1111_DRV(dev->driver); 1371 int ret = 0; 1372 1373 if (drv->remove) 1374 ret = drv->remove(sadev); 1375 return ret; 1376 } 1377 1378 struct bus_type sa1111_bus_type = { 1379 .name = "sa1111-rab", 1380 .match = sa1111_match, 1381 .probe = sa1111_bus_probe, 1382 .remove = sa1111_bus_remove, 1383 }; 1384 EXPORT_SYMBOL(sa1111_bus_type); 1385 1386 int sa1111_driver_register(struct sa1111_driver *driver) 1387 { 1388 driver->drv.bus = &sa1111_bus_type; 1389 return driver_register(&driver->drv); 1390 } 1391 EXPORT_SYMBOL(sa1111_driver_register); 1392 1393 void sa1111_driver_unregister(struct sa1111_driver *driver) 1394 { 1395 driver_unregister(&driver->drv); 1396 } 1397 EXPORT_SYMBOL(sa1111_driver_unregister); 1398 1399 #ifdef CONFIG_DMABOUNCE 1400 /* 1401 * According to the "Intel StrongARM SA-1111 Microprocessor Companion 1402 * Chip Specification Update" (June 2000), erratum #7, there is a 1403 * significant bug in the SA1111 SDRAM shared memory controller. If 1404 * an access to a region of memory above 1MB relative to the bank base, 1405 * it is important that address bit 10 _NOT_ be asserted. Depending 1406 * on the configuration of the RAM, bit 10 may correspond to one 1407 * of several different (processor-relative) address bits. 1408 * 1409 * This routine only identifies whether or not a given DMA address 1410 * is susceptible to the bug. 1411 * 1412 * This should only get called for sa1111_device types due to the 1413 * way we configure our device dma_masks. 1414 */ 1415 static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) 1416 { 1417 /* 1418 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module 1419 * User's Guide" mentions that jumpers R51 and R52 control the 1420 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or 1421 * SDRAM bank 1 on Neponset). The default configuration selects 1422 * Assabet, so any address in bank 1 is necessarily invalid. 1423 */ 1424 return (machine_is_assabet() || machine_is_pfs168()) && 1425 (addr >= 0xc8000000 || (addr + size) >= 0xc8000000); 1426 } 1427 1428 static int sa1111_notifier_call(struct notifier_block *n, unsigned long action, 1429 void *data) 1430 { 1431 struct sa1111_dev *dev = to_sa1111_device(data); 1432 1433 switch (action) { 1434 case BUS_NOTIFY_ADD_DEVICE: 1435 if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) { 1436 int ret = dmabounce_register_dev(&dev->dev, 1024, 4096, 1437 sa1111_needs_bounce); 1438 if (ret) 1439 dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret); 1440 } 1441 break; 1442 1443 case BUS_NOTIFY_DEL_DEVICE: 1444 if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) 1445 dmabounce_unregister_dev(&dev->dev); 1446 break; 1447 } 1448 return NOTIFY_OK; 1449 } 1450 1451 static struct notifier_block sa1111_bus_notifier = { 1452 .notifier_call = sa1111_notifier_call, 1453 }; 1454 #endif 1455 1456 static int __init sa1111_init(void) 1457 { 1458 int ret = bus_register(&sa1111_bus_type); 1459 #ifdef CONFIG_DMABOUNCE 1460 if (ret == 0) 1461 bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier); 1462 #endif 1463 if (ret == 0) 1464 platform_driver_register(&sa1111_device_driver); 1465 return ret; 1466 } 1467 1468 static void __exit sa1111_exit(void) 1469 { 1470 platform_driver_unregister(&sa1111_device_driver); 1471 #ifdef CONFIG_DMABOUNCE 1472 bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier); 1473 #endif 1474 bus_unregister(&sa1111_bus_type); 1475 } 1476 1477 subsys_initcall(sa1111_init); 1478 module_exit(sa1111_exit); 1479 1480 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver"); 1481 MODULE_LICENSE("GPL"); 1482