1*724ba675SRob Herring// SPDX-License-Identifier: GPL-2.0 2*724ba675SRob Herring/* 3*724ba675SRob Herring * Copyright (C) 2011 - 2014 Xilinx 4*724ba675SRob Herring * Copyright (C) 2012 National Instruments Corp. 5*724ba675SRob Herring */ 6*724ba675SRob Herring/dts-v1/; 7*724ba675SRob Herring#include "zynq-7000.dtsi" 8*724ba675SRob Herring 9*724ba675SRob Herring/ { 10*724ba675SRob Herring model = "Digilent Zybo board"; 11*724ba675SRob Herring compatible = "digilent,zynq-zybo", "xlnx,zynq-7000"; 12*724ba675SRob Herring 13*724ba675SRob Herring aliases { 14*724ba675SRob Herring ethernet0 = &gem0; 15*724ba675SRob Herring serial0 = &uart1; 16*724ba675SRob Herring mmc0 = &sdhci0; 17*724ba675SRob Herring }; 18*724ba675SRob Herring 19*724ba675SRob Herring memory@0 { 20*724ba675SRob Herring device_type = "memory"; 21*724ba675SRob Herring reg = <0x0 0x20000000>; 22*724ba675SRob Herring }; 23*724ba675SRob Herring 24*724ba675SRob Herring chosen { 25*724ba675SRob Herring bootargs = ""; 26*724ba675SRob Herring stdout-path = "serial0:115200n8"; 27*724ba675SRob Herring }; 28*724ba675SRob Herring 29*724ba675SRob Herring usb_phy0: phy0 { 30*724ba675SRob Herring #phy-cells = <0>; 31*724ba675SRob Herring compatible = "usb-nop-xceiv"; 32*724ba675SRob Herring reset-gpios = <&gpio0 46 1>; 33*724ba675SRob Herring }; 34*724ba675SRob Herring}; 35*724ba675SRob Herring 36*724ba675SRob Herring&clkc { 37*724ba675SRob Herring ps-clk-frequency = <50000000>; 38*724ba675SRob Herring}; 39*724ba675SRob Herring 40*724ba675SRob Herring&gem0 { 41*724ba675SRob Herring status = "okay"; 42*724ba675SRob Herring phy-mode = "rgmii-id"; 43*724ba675SRob Herring phy-handle = <ðernet_phy>; 44*724ba675SRob Herring 45*724ba675SRob Herring ethernet_phy: ethernet-phy@0 { 46*724ba675SRob Herring reg = <0>; 47*724ba675SRob Herring device_type = "ethernet-phy"; 48*724ba675SRob Herring }; 49*724ba675SRob Herring}; 50*724ba675SRob Herring 51*724ba675SRob Herring&sdhci0 { 52*724ba675SRob Herring status = "okay"; 53*724ba675SRob Herring}; 54*724ba675SRob Herring 55*724ba675SRob Herring&uart1 { 56*724ba675SRob Herring status = "okay"; 57*724ba675SRob Herring}; 58*724ba675SRob Herring 59*724ba675SRob Herring&usb0 { 60*724ba675SRob Herring status = "okay"; 61*724ba675SRob Herring dr_mode = "host"; 62*724ba675SRob Herring usb-phy = <&usb_phy0>; 63*724ba675SRob Herring}; 64