xref: /linux/arch/arm/boot/dts/xilinx/zynq-parallella.dts (revision fd7d598270724cc787982ea48bbe17ad383a8b7f) 
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (c) 2014 SUSE LINUX Products GmbH
4 *
5 * Derived from zynq-zed.dts:
6 *
7 *  Copyright (C) 2011 Xilinx
8 *  Copyright (C) 2012 National Instruments Corp.
9 *  Copyright (C) 2013 Xilinx
10 */
11/dts-v1/;
12/include/ "zynq-7000.dtsi"
13
14/ {
15	model = "Adapteva Parallella board";
16	compatible = "adapteva,parallella", "xlnx,zynq-7000";
17
18	aliases {
19		ethernet0 = &gem0;
20		serial0 = &uart1;
21	};
22
23	memory@0 {
24		device_type = "memory";
25		reg = <0x0 0x40000000>;
26	};
27
28	chosen {
29		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
30		stdout-path = "serial0:115200n8";
31	};
32};
33
34&clkc {
35	fclk-enable = <0xf>;
36	ps-clk-frequency = <33333333>;
37};
38
39&gem0 {
40	status = "okay";
41	phy-mode = "rgmii-id";
42	phy-handle = <&ethernet_phy>;
43
44	ethernet_phy: ethernet-phy@0 {
45		/* Marvell 88E1318 */
46		compatible = "ethernet-phy-id0141.0e90",
47		             "ethernet-phy-ieee802.3-c22";
48		reg = <0>;
49		device_type = "ethernet-phy";
50		marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
51		                   <0x3 0x11 0xfff0 0xa>;
52	};
53};
54
55&i2c0 {
56	status = "okay";
57
58	isl9305: isl9305@68 {
59		compatible = "isil,isl9305";
60		reg = <0x68>;
61
62		regulators {
63			dcd1 {
64				regulator-name = "VDD_DSP";
65				regulator-always-on;
66			};
67			dcd2 {
68				regulator-name = "1P35V";
69				regulator-always-on;
70			};
71			ldo1 {
72				regulator-name = "VDD_ADJ";
73			};
74			ldo2 {
75				regulator-name = "VDD_GPIO";
76				regulator-always-on;
77			};
78		};
79	};
80};
81
82&sdhci1 {
83	status = "okay";
84};
85
86&uart1 {
87	status = "okay";
88};
89