xref: /linux/arch/arm/boot/dts/ti/omap/omap3-igep0020-rev-f.dts (revision be239684b18e1cdcafcf8c7face4a2f562c745ad)
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
4 *
5 * Copyright (C) Javier Martinez Canillas <javier@dowhile0.org>
6 * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
7 */
8
9#include "omap3-igep0020-common.dtsi"
10
11/ {
12	model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
13	compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3";
14
15	/* Regulator to trigger the WL_EN signal of the Wifi module */
16	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
17		compatible = "regulator-fixed";
18		regulator-name = "regulator-lbep5clwmc-wlen";
19		regulator-min-microvolt = <3300000>;
20		regulator-max-microvolt = <3300000>;
21		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 - WL_EN */
22		enable-active-high;
23	};
24};
25
26&omap3_pmx_core {
27	lbep5clwmc_pins: lbep5clwmc-pins {
28		pinctrl-single,pins = <
29			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs3.gpio_177 - W_IRQ */
30			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
31			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - WL_EN */
32		>;
33	};
34};
35
36&mmc2 {
37	pinctrl-names = "default";
38	pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
39	vmmc-supply = <&lbep5clwmc_wlen>;
40	bus-width = <4>;
41	non-removable;
42
43	#address-cells = <1>;
44	#size-cells = <0>;
45	wlcore: wlcore@2 {
46		compatible = "ti,wl1835";
47		reg = <2>;
48		interrupt-parent = <&gpio6>;
49		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */
50	};
51};
52
53&uart2 {
54	bluetooth {
55		compatible = "ti,wl1835-st";
56		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
57		max-speed = <300000>;
58	};
59};
60