1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6#include "dra74-ipu-dsp-common.dtsi" 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/clock/ti-dra7-atl.h> 9#include <dt-bindings/input/input.h> 10 11/ { 12 chosen { 13 stdout-path = &uart1; 14 }; 15 16 extcon_usb1: extcon_usb1 { 17 compatible = "linux,extcon-usb-gpio"; 18 id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; 19 }; 20 21 extcon_usb2: extcon_usb2 { 22 compatible = "linux,extcon-usb-gpio"; 23 id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; 24 }; 25 26 sound0: sound0 { 27 compatible = "simple-audio-card"; 28 simple-audio-card,name = "DRA7xx-EVM"; 29 simple-audio-card,widgets = 30 "Headphone", "Headphone Jack", 31 "Line", "Line Out", 32 "Microphone", "Mic Jack", 33 "Line", "Line In"; 34 simple-audio-card,routing = 35 "Headphone Jack", "HPLOUT", 36 "Headphone Jack", "HPROUT", 37 "Line Out", "LLOUT", 38 "Line Out", "RLOUT", 39 "MIC3L", "Mic Jack", 40 "MIC3R", "Mic Jack", 41 "Mic Jack", "Mic Bias", 42 "LINE1L", "Line In", 43 "LINE1R", "Line In"; 44 simple-audio-card,format = "dsp_b"; 45 simple-audio-card,bitclock-master = <&sound0_master>; 46 simple-audio-card,frame-master = <&sound0_master>; 47 simple-audio-card,bitclock-inversion; 48 49 sound0_master: simple-audio-card,cpu { 50 sound-dai = <&mcasp3>; 51 system-clock-frequency = <5644800>; 52 }; 53 54 simple-audio-card,codec { 55 sound-dai = <&tlv320aic3106>; 56 clocks = <&atl_clkin2_ck>; 57 }; 58 }; 59 60 leds { 61 compatible = "gpio-leds"; 62 led0 { 63 label = "dra7:usr1"; 64 gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; 65 default-state = "off"; 66 }; 67 68 led1 { 69 label = "dra7:usr2"; 70 gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; 71 default-state = "off"; 72 }; 73 74 led2 { 75 label = "dra7:usr3"; 76 gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; 77 default-state = "off"; 78 }; 79 80 led3 { 81 label = "dra7:usr4"; 82 gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; 83 default-state = "off"; 84 }; 85 }; 86 87 gpio_keys { 88 compatible = "gpio-keys"; 89 #address-cells = <1>; 90 #size-cells = <0>; 91 autorepeat; 92 93 USER1 { 94 label = "btnUser1"; 95 linux,code = <BTN_0>; 96 gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; 97 }; 98 99 USER2 { 100 label = "btnUser2"; 101 linux,code = <BTN_1>; 102 gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; 103 }; 104 }; 105}; 106 107&i2c3 { 108 status = "okay"; 109 clock-frequency = <400000>; 110}; 111 112&mcspi1 { 113 status = "okay"; 114}; 115 116&mcspi2 { 117 status = "okay"; 118}; 119 120&uart1 { 121 status = "okay"; 122 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, 123 <&dra7_pmx_core 0x3e0>; 124}; 125 126&uart2 { 127 status = "okay"; 128}; 129 130&uart3 { 131 status = "okay"; 132}; 133 134&qspi { 135 status = "okay"; 136 137 spi-max-frequency = <76800000>; 138 flash@0 { 139 compatible = "s25fl256s1"; 140 spi-max-frequency = <76800000>; 141 reg = <0>; 142 spi-tx-bus-width = <1>; 143 spi-rx-bus-width = <4>; 144 #address-cells = <1>; 145 #size-cells = <1>; 146 147 /* MTD partition table. 148 * The ROM checks the first four physical blocks 149 * for a valid file to boot and the flash here is 150 * 64KiB block size. 151 */ 152 partition@0 { 153 label = "QSPI.SPL"; 154 reg = <0x00000000 0x00010000>; 155 }; 156 partition@1 { 157 label = "QSPI.SPL.backup1"; 158 reg = <0x00010000 0x00010000>; 159 }; 160 partition@2 { 161 label = "QSPI.SPL.backup2"; 162 reg = <0x00020000 0x00010000>; 163 }; 164 partition@3 { 165 label = "QSPI.SPL.backup3"; 166 reg = <0x00030000 0x00010000>; 167 }; 168 partition@4 { 169 label = "QSPI.u-boot"; 170 reg = <0x00040000 0x00100000>; 171 }; 172 partition@5 { 173 label = "QSPI.u-boot-spl-os"; 174 reg = <0x00140000 0x00080000>; 175 }; 176 partition@6 { 177 label = "QSPI.u-boot-env"; 178 reg = <0x001c0000 0x00010000>; 179 }; 180 partition@7 { 181 label = "QSPI.u-boot-env.backup1"; 182 reg = <0x001d0000 0x0010000>; 183 }; 184 partition@8 { 185 label = "QSPI.kernel"; 186 reg = <0x001e0000 0x0800000>; 187 }; 188 partition@9 { 189 label = "QSPI.file-system"; 190 reg = <0x009e0000 0x01620000>; 191 }; 192 }; 193}; 194 195&omap_dwc3_1 { 196 extcon = <&extcon_usb1>; 197}; 198 199&usb1 { 200 dr_mode = "otg"; 201 extcon = <&extcon_usb1>; 202}; 203 204&omap_dwc3_2 { 205 extcon = <&extcon_usb2>; 206}; 207 208&usb2 { 209 dr_mode = "host"; 210 extcon = <&extcon_usb2>; 211}; 212 213&atl { 214 assigned-clocks = <&abe_dpll_sys_clk_mux>, 215 <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>, 216 <&dpll_abe_ck>, 217 <&dpll_abe_m2x2_ck>, 218 <&atl_clkin2_ck>; 219 assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; 220 assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; 221 222 status = "okay"; 223 224 atl2 { 225 bws = <DRA7_ATL_WS_MCASP2_FSX>; 226 aws = <DRA7_ATL_WS_MCASP3_FSX>; 227 }; 228}; 229 230&mcasp3 { 231 #sound-dai-cells = <0>; 232 233 assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; 234 assigned-clock-parents = <&atl_clkin2_ck>; 235 236 status = "okay"; 237 238 op-mode = <0>; /* MCASP_IIS_MODE */ 239 tdm-slots = <2>; 240 /* 4 serializer */ 241 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 242 1 2 0 0 243 >; 244 tx-num-evt = <32>; 245 rx-num-evt = <32>; 246}; 247 248&pcie1_rc { 249 status = "okay"; 250}; 251 252&mmc4 { 253 bus-width = <4>; 254 cap-power-off-card; 255 keep-power-in-suspend; 256 non-removable; 257 #address-cells = <1>; 258 #size-cells = <0>; 259 wifi@2 { 260 compatible = "ti,wl1835"; 261 reg = <2>; 262 interrupt-parent = <&gpio5>; 263 interrupts = <7 IRQ_TYPE_EDGE_RISING>; 264 }; 265}; 266