xref: /linux/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts (revision 7f71507851fc7764b36a3221839607d3a45c2025)
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Support for CompuLab CL-SOM-AM57x System-on-Module
4 *
5 * Copyright (C) 2015 CompuLab Ltd. - https://www.compulab.co.il/
6 * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
7 */
8
9/dts-v1/;
10
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/interrupt-controller/irq.h>
13#include "am5728.dtsi"
14
15/ {
16	model = "CompuLab CL-SOM-AM57x";
17	compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
18
19	memory@0 {
20		device_type = "memory";
21		reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
22	};
23
24	leds {
25		compatible = "gpio-leds";
26		pinctrl-names = "default";
27		pinctrl-0 = <&leds_pins_default>;
28
29		led0 {
30			label = "cl-som-am57x:green";
31			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
32			linux,default-trigger = "heartbeat";
33			default-state = "off";
34		};
35	};
36
37	vdd_3v3: fixedregulator-vdd_3v3 {
38		compatible = "regulator-fixed";
39		regulator-name = "vdd_3v3";
40		regulator-min-microvolt = <3300000>;
41		regulator-max-microvolt = <3300000>;
42	};
43
44	ads7846reg: fixedregulator-ads7846-reg {
45		compatible = "regulator-fixed";
46		regulator-name = "ads7846-reg";
47		regulator-min-microvolt = <3300000>;
48		regulator-max-microvolt = <3300000>;
49	};
50
51	sound0: sound0 {
52		compatible = "simple-audio-card";
53		simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
54		simple-audio-card,format = "i2s";
55		simple-audio-card,bitclock-master = <&dailink0_master>;
56		simple-audio-card,frame-master = <&dailink0_master>;
57		simple-audio-card,widgets =
58					"Headphone", "Headphone Jack",
59					"Microphone", "Microphone Jack",
60					"Line", "Line Jack";
61		simple-audio-card,routing =
62					"Headphone Jack", "RHPOUT",
63					"Headphone Jack", "LHPOUT",
64					"LLINEIN", "Line Jack",
65					"MICIN", "Mic Bias",
66					"Mic Bias", "Microphone Jack";
67
68		dailink0_master: simple-audio-card,cpu {
69			sound-dai = <&mcasp3>;
70		};
71
72		simple-audio-card,codec {
73			sound-dai = <&wm8731>;
74			system-clock-frequency = <12000000>;
75		};
76	};
77};
78
79&dra7_pmx_core {
80	leds_pins_default: leds-default-pins {
81		pinctrl-single,pins = <
82			DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14)	/* gpmc_a15.gpio2_5 */
83		>;
84	};
85
86	i2c1_pins_default: i2c1-default-pins {
87		pinctrl-single,pins = <
88			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
89			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
90		>;
91	};
92
93	i2c3_pins_default: i2c3-default-pins {
94		pinctrl-single,pins = <
95			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
96			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
97		>;
98	};
99
100	i2c4_pins_default: i2c4-default-pins {
101		pinctrl-single,pins = <
102			DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10)	/* mcasp1_acl.i2c4_sda */
103			DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsr.i2c4_scl */
104		>;
105	};
106
107	tps659038_pins_default: tps659038-default-pins {
108		pinctrl-single,pins = <
109			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
110		>;
111	};
112
113	mmc2_pins_default: mmc2-default-pins {
114		pinctrl-single,pins = <
115			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
116			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
117			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
118			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
119			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
120			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
121			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
122			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
123			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
124			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
125		>;
126	};
127
128	qspi1_pins: qspi1-pins {
129		pinctrl-single,pins = <
130			DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
131			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d0 */
132			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d1 */
133			DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
134			DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
135			DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs3.qspi1_cs1 */
136		>;
137	};
138
139	cpsw_pins_default: cpsw-default-pins {
140		pinctrl-single,pins = <
141			/* Slave at addr 0x0 */
142			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tclk */
143			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tctl */
144			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3 */
145			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td2 */
146			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td1 */
147			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td0 */
148			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
149			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
150			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
151			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
152			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
153			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
154
155			/* Slave at addr 0x1 */
156			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_tclk */
157			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
158			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
159			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
160			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
161			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
162			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
163			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
164			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
165			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
166			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
167			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
168		>;
169	};
170
171	cpsw_pins_sleep: cpsw-sleep-pins {
172		pinctrl-single,pins = <
173			/* Slave 1 */
174			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
175			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
176			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
177			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
178			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
179			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
180			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
181			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
182			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
183			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
184			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
185			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
186
187			/* Slave 2 */
188			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
189			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
190			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
191			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
192			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
193			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
194			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
195			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
196			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
197			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
198			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
199			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
200		>;
201	};
202
203	davinci_mdio_pins_default: davinci-mdio-default-pins {
204		pinctrl-single,pins = <
205			/* MDIO */
206			DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
207			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d11.mdio_d */
208		>;
209	};
210
211	davinci_mdio_pins_sleep: davinci-mdio-sleep-pins {
212		pinctrl-single,pins = <
213			DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
214			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
215		>;
216	};
217
218	ads7846_pins: ads7846-pins {
219		pinctrl-single,pins = <
220			DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
221		>;
222	};
223
224	mcasp3_pins_default: mcasp3-default-pins {
225		pinctrl-single,pins = <
226			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
227			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
228			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
229			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
230		>;
231	};
232
233	mcasp3_pins_sleep: mcasp3-sleep-pins {
234		pinctrl-single,pins = <
235			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
236			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
237			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
238			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
239		>;
240	};
241};
242
243&i2c1 {
244	status = "okay";
245	pinctrl-names = "default";
246	pinctrl-0 = <&i2c1_pins_default>;
247	clock-frequency = <400000>;
248};
249
250&i2c3 {
251	status = "okay";
252	pinctrl-names = "default";
253	pinctrl-0 = <&i2c3_pins_default>;
254	clock-frequency = <400000>;
255};
256
257&i2c4 {
258	status = "okay";
259	pinctrl-names = "default";
260	pinctrl-0 = <&i2c4_pins_default>;
261	clock-frequency = <400000>;
262
263	tps659038: tps659038@58 {
264		compatible = "ti,tps659038";
265		reg = <0x58>;
266		interrupt-parent = <&gpio1>;
267		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
268
269		pinctrl-names = "default";
270		pinctrl-0 = <&tps659038_pins_default>;
271
272		#interrupt-cells = <2>;
273		interrupt-controller;
274
275		ti,system-power-controller;
276
277		tps659038_pmic {
278			compatible = "ti,tps659038-pmic";
279
280			regulators {
281				smps12_reg: smps12 {
282					/* VDD_MPU */
283					regulator-name = "smps12";
284					regulator-min-microvolt = < 850000>;
285					regulator-max-microvolt = <1250000>;
286					regulator-always-on;
287					regulator-boot-on;
288				};
289
290				smps3_reg: smps3 {
291					/* VDD_DDR */
292					regulator-name = "smps3";
293					regulator-min-microvolt = <1500000>;
294					regulator-max-microvolt = <1500000>;
295					regulator-always-on;
296					regulator-boot-on;
297				};
298
299				smps45_reg: smps45 {
300					/* VDD_DSPEVE */
301					regulator-name = "smps45";
302					regulator-min-microvolt = < 850000>;
303					regulator-max-microvolt = <1250000>;
304					regulator-always-on;
305					regulator-boot-on;
306				};
307
308				smps6_reg: smps6 {
309					/* VDD_GPU */
310					regulator-name = "smps6";
311					regulator-min-microvolt = < 850000>;
312					regulator-max-microvolt = <1250000>;
313					regulator-always-on;
314					regulator-boot-on;
315				};
316
317				smps7_reg: smps7 {
318					/* VDD_CORE */
319					regulator-name = "smps7";
320					regulator-min-microvolt = < 850000>;
321					regulator-max-microvolt = <1160000>;
322					regulator-always-on;
323					regulator-boot-on;
324				};
325
326				smps8_reg: smps8 {
327					/* VDD_IVA */
328					regulator-name = "smps8";
329					regulator-min-microvolt = < 850000>;
330					regulator-max-microvolt = <1250000>;
331					regulator-always-on;
332					regulator-boot-on;
333				};
334
335				smps9_reg: smps9 {
336					/* PMIC_3V3 */
337					regulator-name = "smps9";
338					regulator-min-microvolt = <3300000>;
339					regulator-max-microvolt = <3300000>;
340					regulator-always-on;
341					regulator-boot-on;
342				};
343
344
345				ldo1_reg: ldo1 {
346					/* VDD_SD / VDDSHV8  */
347					regulator-name = "ldo1";
348					regulator-min-microvolt = <1800000>;
349					regulator-max-microvolt = <3300000>;
350					regulator-boot-on;
351					regulator-always-on;
352				};
353
354				ldo2_reg: ldo2 {
355					/* VDD_1V8 */
356					regulator-name = "ldo2";
357					regulator-min-microvolt = <1800000>;
358					regulator-max-microvolt = <1800000>;
359					regulator-always-on;
360					regulator-boot-on;
361				};
362
363				ldo3_reg: ldo3 {
364					/* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
365					regulator-name = "ldo3";
366					regulator-min-microvolt = <1800000>;
367					regulator-max-microvolt = <1800000>;
368					regulator-always-on;
369					regulator-boot-on;
370				};
371
372				ldo4_reg: ldo4 {
373					/* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
374					regulator-name = "ldo4";
375					regulator-min-microvolt = <1800000>;
376					regulator-max-microvolt = <1800000>;
377					regulator-always-on;
378					regulator-boot-on;
379				};
380
381				ldo9_reg: ldo9 {
382					/* VDD_RTC */
383					regulator-name = "ldo9";
384					regulator-min-microvolt = <1050000>;
385					regulator-max-microvolt = <1050000>;
386					regulator-always-on;
387					regulator-boot-on;
388				};
389
390				ldoln_reg: ldoln {
391					/* VDDA_1V8_PLL */
392					regulator-name = "ldoln";
393					regulator-min-microvolt = <1800000>;
394					regulator-max-microvolt = <1800000>;
395					regulator-always-on;
396					regulator-boot-on;
397				};
398
399				ldousb_reg: ldousb {
400					/* VDDA_3V_USB: VDDA_USBHS33 */
401					regulator-name = "ldousb";
402					regulator-min-microvolt = <3300000>;
403					regulator-max-microvolt = <3300000>;
404					regulator-always-on;
405					regulator-boot-on;
406				};
407
408				/* regen1 not used */
409			};
410		};
411
412		tps659038_pwr_button: tps659038_pwr_button {
413			compatible = "ti,palmas-pwrbutton";
414			interrupt-parent = <&tps659038>;
415			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
416			wakeup-source;
417			ti,palmas-long-press-seconds = <12>;
418		};
419
420		tps659038_gpio: tps659038_gpio {
421			compatible = "ti,palmas-gpio";
422			gpio-controller;
423			#gpio-cells = <2>;
424		};
425	};
426
427	rtc0: rtc@56 {
428		compatible = "emmicro,em3027";
429		reg = <0x56>;
430	};
431
432	eeprom_module: eeprom@50 {
433		compatible = "atmel,24c08";
434		reg = <0x50>;
435		pagesize = <16>;
436	};
437
438	wm8731: wm8731@1a {
439		#sound-dai-cells = <0>;
440		compatible = "wlf,wm8731";
441		reg = <0x1a>;
442		status = "okay";
443	};
444};
445
446&cpu0 {
447	cpu0-supply = <&smps12_reg>;
448	voltage-tolerance = <1>;
449};
450
451&sata {
452	status = "okay";
453};
454
455&mailbox5 {
456	status = "okay";
457	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
458		status = "okay";
459	};
460	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
461		status = "okay";
462	};
463};
464
465&mailbox6 {
466	status = "okay";
467	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
468		status = "okay";
469	};
470	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
471		status = "okay";
472	};
473};
474
475&mmc2 {
476	status = "okay";
477
478	pinctrl-names = "default";
479	pinctrl-0 = <&mmc2_pins_default>;
480
481	vmmc-supply = <&vdd_3v3>;
482	bus-width = <8>;
483	ti,non-removable;
484	cap-mmc-dual-data-rate;
485};
486
487&qspi {
488	status = "okay";
489	pinctrl-names = "default";
490	pinctrl-0 = <&qspi1_pins>;
491
492	spi-max-frequency = <48000000>;
493
494	spi_flash: flash@0 {
495		#address-cells = <1>;
496		#size-cells = <1>;
497		compatible = "spansion,m25p80", "jedec,spi-nor";
498		reg = <0>;				/* CS0 */
499		spi-max-frequency = <48000000>;
500
501		partition@0 {
502			label = "uboot";
503			reg = <0x0 0xc0000>;
504		};
505
506		partition@c0000 {
507			label = "uboot environment";
508			reg = <0xc0000 0x40000>;
509		};
510
511		partition@100000 {
512			label = "reserved";
513			reg = <0x100000 0x0>;
514		};
515	};
516
517	/* touch controller */
518	touchscreen@1 {
519		pinctrl-names = "default";
520		pinctrl-0 = <&ads7846_pins>;
521
522		compatible = "ti,ads7846";
523		vcc-supply = <&ads7846reg>;
524
525		reg = <1>;                              /* CS1 */
526		spi-max-frequency = <1500000>;
527
528		interrupt-parent = <&gpio1>;
529		interrupts = <31 0>;
530		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
531
532
533		ti,x-min = /bits/ 16 <0x0>;
534		ti,x-max = /bits/ 16 <0x0fff>;
535		ti,y-min = /bits/ 16 <0x0>;
536		ti,y-max = /bits/ 16 <0x0fff>;
537
538		ti,x-plate-ohms = /bits/ 16 <180>;
539		ti,pressure-max = /bits/ 16 <255>;
540
541		ti,debounce-max = /bits/ 16 <30>;
542		ti,debounce-tol = /bits/ 16 <10>;
543		ti,debounce-rep = /bits/ 16 <1>;
544
545		wakeup-source;
546	};
547};
548
549&mac_sw {
550	status = "okay";
551	pinctrl-names = "default", "sleep";
552	pinctrl-0 = <&cpsw_pins_default>;
553	pinctrl-1 = <&cpsw_pins_sleep>;
554};
555
556&cpsw_port1 {
557	phy-handle = <&ethphy0>;
558	phy-mode = "rgmii-txid";
559	ti,dual-emac-pvid = <1>;
560};
561
562&cpsw_port2 {
563	phy-handle = <&ethphy1>;
564	phy-mode = "rgmii-txid";
565	ti,dual-emac-pvid = <2>;
566};
567
568&davinci_mdio_sw {
569	pinctrl-names = "default", "sleep";
570	pinctrl-0 = <&davinci_mdio_pins_default>;
571	pinctrl-1 = <&davinci_mdio_pins_sleep>;
572
573	ethphy0: ethernet-phy@0 {
574		reg = <0>;
575	};
576
577	ethphy1: ethernet-phy@1 {
578		reg = <1>;
579	};
580};
581
582&usb2_phy1 {
583	phy-supply = <&ldousb_reg>;
584};
585
586&usb2_phy2 {
587	phy-supply = <&ldousb_reg>;
588};
589
590&usb1 {
591	dr_mode = "host";
592};
593
594&usb2 {
595	dr_mode = "host";
596};
597
598&mcasp3 {
599	#sound-dai-cells = <0>;
600	pinctrl-names = "default", "sleep";
601	pinctrl-0 = <&mcasp3_pins_default>;
602	pinctrl-1 = <&mcasp3_pins_sleep>;
603	status = "okay";
604
605	op-mode = <0>;	/* MCASP_IIS_MODE */
606	tdm-slots = <2>;
607	/* 4 serializers */
608	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
609		1 2 0 0
610	>;
611};
612
613&gpio3_target {
614	ti,no-reset-on-init;
615};
616
617&gpio2_target {
618	status = "okay";
619	ti,no-reset-on-init;
620};
621
622&pruss1_mdio {
623	status = "disabled";
624};
625
626&pruss2_mdio {
627	status = "disabled";
628};
629