1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/* 7 * VScom OnRISC 8 * https://www.vscom.de 9 */ 10 11/dts-v1/; 12 13#include "am335x-baltos.dtsi" 14#include "am335x-baltos-leds.dtsi" 15 16/ { 17 model = "OnRISC Baltos iR 2110"; 18}; 19 20&am33xx_pinmux { 21 uart1_pins: uart1-pins { 22 pinctrl-single,pins = < 23 AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) 24 AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) 25 AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) 26 AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) 27 AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ 28 AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ 29 AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ 30 AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ 31 >; 32 }; 33 34 mmc1_pins: mmc1-pins { 35 pinctrl-single,pins = < 36 AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ 37 >; 38 }; 39}; 40 41&uart1 { 42 pinctrl-names = "default"; 43 pinctrl-0 = <&uart1_pins>; 44 dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; 45 dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; 46 dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; 47 rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; 48 49 status = "okay"; 50}; 51 52&usb0_phy { 53 status = "okay"; 54}; 55 56&usb0 { 57 status = "okay"; 58 dr_mode = "host"; 59}; 60 61&davinci_mdio_sw { 62 phy0: ethernet-phy@0 { 63 reg = <1>; 64 }; 65}; 66 67&cpsw_port1 { 68 phy-mode = "rmii"; 69 ti,dual-emac-pvid = <1>; 70 phy-handle = <&phy0>; 71}; 72 73&cpsw_port2 { 74 phy-mode = "rgmii-id"; 75 ti,dual-emac-pvid = <2>; 76 phy-handle = <&phy1>; 77}; 78 79&mmc1 { 80 pinctrl-names = "default"; 81 pinctrl-0 = <&mmc1_pins>; 82 cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; 83}; 84 85&gpio0 { 86 gpio-line-names = 87 "MDIO", 88 "MDC", 89 "NC", 90 "NC", 91 "I2C1_SDA", 92 "I2C1_SCL", 93 "NC", 94 "NC", 95 "NC", 96 "NC", 97 "NC", 98 "NC", 99 "UART1_CTSN", 100 "UART1_RTSN", 101 "UART1_RX", 102 "UART1_TX", 103 "onrisc:blue:wlan", 104 "onrisc:green:app", 105 "USB0_DRVVBUS", 106 "ETH2_INT", 107 "NC", 108 "RMII1_TXD1", 109 "MMC1_DAT0", 110 "MMC1_DAT1", 111 "NC", 112 "NC", 113 "MMC1_DAT2", 114 "MMC1_DAT3", 115 "RMII1_TXD0", 116 "NC", 117 "GPMC_WAIT0", 118 "GPMC_WP_N"; 119}; 120 121&gpio1 { 122 gpio-line-names = 123 "GPMC_AD0", 124 "GPMC_AD1", 125 "GPMC_AD2", 126 "GPMC_AD3", 127 "GPMC_AD4", 128 "GPMC_AD5", 129 "GPMC_AD6", 130 "GPMC_AD7", 131 "NC", 132 "NC", 133 "CONSOLE_RX", 134 "CONSOLE_TX", 135 "NC", 136 "NC", 137 "NC", 138 "SD_CD", 139 "RGMII2_TCTL", 140 "RGMII2_RCTL", 141 "RGMII2_TD3", 142 "RGMII2_TD2", 143 "RGMII2_TD1", 144 "RGMII2_TD0", 145 "RGMII2_TCLK", 146 "RGMII2_RCLK", 147 "RGMII2_RD3", 148 "RGMII2_RD2", 149 "RGMII2_RD1", 150 "RGMII2_RD0", 151 "PMIC_INT1", 152 "GPMC_CSN0_Flash", 153 "MMC1_CLK", 154 "MMC1_CMD"; 155}; 156 157&gpio2 { 158 gpio-line-names = 159 "GPMC_CSN3_BUS", 160 "GPMC_CLK", 161 "GPMC_ADVN_ALE", 162 "GPMC_OEN_RE_N", 163 "GPMC_WE_N", 164 "GPMC_BEN0_CLE", 165 "NC", 166 "NC", 167 "NC", 168 "NC", 169 "NC", 170 "NC", 171 "NC", 172 "NC", 173 "NC", 174 "NC", 175 "NC", 176 "NC", 177 "SW2_0", 178 "SW2_1", 179 "RMII1_RXD1", 180 "RMII1_RXD0", 181 "UART1_DTR", 182 "UART1_DSR", 183 "UART1_DCD", 184 "UART1_RI", 185 "MMC0_DAT3", 186 "MMC0_DAT2", 187 "MMC0_DAT1", 188 "MMC0_DAT0", 189 "MMC0_CLK", 190 "MMC0_CMD"; 191}; 192 193&gpio3 { 194 gpio-line-names = 195 "onrisc:red:power", 196 "RMII1_CRS_DV", 197 "RMII1_RXER", 198 "RMII1_TXEN", 199 "NC", 200 "NC", 201 "NC", 202 "WLAN_IRQ", 203 "WLAN_EN", 204 "SW2_2", 205 "SW2_3", 206 "NC", 207 "NC", 208 "NC", 209 "ModeA0", 210 "ModeA1", 211 "ModeA2", 212 "ModeA3", 213 "NC", 214 "NC", 215 "NC", 216 "NC", 217 "NC", 218 "NC", 219 "NC", 220 "NC", 221 "NC", 222 "NC", 223 "NC", 224 "NC", 225 "NC", 226 "NC"; 227}; 228